So rename accordingly to match the definition used by Linux Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- drivers/net/phy/marvell.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4bf8bae59a95..c4d9c7fe493a 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -19,6 +19,9 @@ #define MII_M1011_PHY_SCR 0x10 #define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060 +#define MII_88E1121_PHY_LED_CTRL 16 +#define MII_88E1121_PHY_LED_PAGE 3 + #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 BIT(15) #define MII_M1011_PHY_STATUS_100 BIT(14) @@ -38,9 +41,6 @@ #define MII_88E1318S_PHY_MSCR1_REG 16 #define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6) -#define MII_88E1540_LED_PAGE 0x3 -#define MII_88E1540_LED_CONTROL 0x10 - #define MII_88E1540_QSGMII_PAGE 0x4 #define MII_88E1540_QSGMII_CONTROL 0x0 #define MII_88E1540_QSGMII_AUTONEG_EN BIT(12) @@ -157,8 +157,8 @@ static int m88e1540_config_init(struct phy_device *phydev) * Link: On * No Link: Off */ - phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1540_LED_PAGE); - phy_write(phydev, MII_88E1540_LED_CONTROL, 0x1111); + phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + phy_write(phydev, MII_88E1121_PHY_LED_CTRL, 0x1111); /* Power-up the PHY. When going from power down to normal operation, * software reset and auto-negotiation restart are also performed. -- 2.11.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
