On Wed, Jan 11, 2017 at 04:59:13PM +0100, Uwe Kleine-König wrote: > Hello, > > this series targets to add support for the Marvell phy 88e1510 to the > marvell phy driver. To make this and future additions easy there are > several preparing patches that make the barebox driver very similar to > the Linux driver. This allows to have the two drivers open side by side > (I use vim -d) to add new features to the barebox driver that are > already present in Linux. > > Best regards > Uwe > > Uwe Kleine-König (7): > net/phy: marvell: rename 88E1545 to 88E1540 > net/phy: marvell: 88E1540 LED registers already exist on 88E1121 > net/phy: marvell: rename phy_driver array to match Linux driver > net/phy: marvell: change spacing to be more similar to the Linux > driver > net/phy: marvell: align definition of MII_88E1121_PHY_MSCR to Linux > driver > net/phy: marvell: improve config_aneg for 88E1121R and 88E1318S > net/phy: marvell: add support for 88e1510 to marvell phy driver > > drivers/net/phy/marvell.c | 353 +++++++++++++++++++++++++++++++++++++++----- > include/linux/marvell_phy.h | 2 +- > 2 files changed, 314 insertions(+), 41 deletions(-) Applied, thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
