Hi Sascha, On Mon, Jan 16, 2017 at 11:50 AM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: > The following series adds i.MX7 support to barebox. The port > was done on the WaRP7 board. The board starts, eMMC, USB and serial work. > This board does not have ethernet or NAND, so supporting this is > left for a later exercise. > > It will be some additional fun to support the 2nd CPU for i.MX7d as we'll > need PSCI support then. So far we are limited to a single core, but > the only currently supported board is single core anyway. > > One issue remaining is that I am currently unable to reset the board > using the watchdog or the barebox reset command. Out of ideas, will > fix later. imx7 has know problem that cannot be reset by softreset only by external signal as Fabio suggested. > > Sascha > > > ---------------------------------------------------------------- > Juergen Borleis (10): > imx-usb-loader: let constant data be const > imx-usb-loader: this table is used internally only, so keep it static > imx-usb-loader: add i.MX7S support > ARM: Makefile: format fix > ARM: i.MX: Add i.MX7 base architecture support > clk: i.MX: Add clock support for i.MX7 > ARM: i.MX: gpt: Add i.MX7 support > pinmmux: i.MX: add pin mux support for i.MX7 > serial: i.MX: add i.MX7 support > ARM: i.MX: Add WaRP7 board support > > Sascha Hauer (13): > i2c: i.MX: Enable clock > mci: imx-esdhc: Enable clock > serial: i.MX: Enable clock > usb: imx: Make usb-misc multi instance safe > usb: imx: Add usbmisc support for i.MX7 > usb: imx: Add clock support > phy: usb-nop-xceiv: Add clock support > of: partitions: force "partitions" subnode > mci: Allow to partition eMMC boot partitions > mci: imx-esdhci: remove wrong write protection test > clk: i.MX: pllv3: Add support for the i.MX7 enet pll > clk: imx: Add clk-cpu support > clk: i.MX7: Add missing USB clocks > > Documentation/boards/imx.rst | 1 + > Documentation/boards/imx/Element14-WaRP7.rst | 54 ++ > arch/arm/Makefile | 2 +- > arch/arm/boards/Makefile | 1 + > arch/arm/boards/element14-warp7/Makefile | 2 + > arch/arm/boards/element14-warp7/board.c | 35 + > .../element14-warp7/flash-header-mx7-warp.imxcfg | 81 ++ > arch/arm/boards/element14-warp7/lowlevel.c | 48 ++ > arch/arm/dts/Makefile | 1 + > arch/arm/dts/imx7s-warp.dts | 45 ++ > arch/arm/mach-imx/Kconfig | 9 + > arch/arm/mach-imx/Makefile | 1 + > arch/arm/mach-imx/boot.c | 70 ++ > arch/arm/mach-imx/clocksource.c | 6 +- > arch/arm/mach-imx/cpu_init.c | 5 + > arch/arm/mach-imx/imx.c | 6 + > arch/arm/mach-imx/imx7.c | 75 ++ > arch/arm/mach-imx/include/mach/debug_ll.h | 3 + > arch/arm/mach-imx/include/mach/generic.h | 16 + > arch/arm/mach-imx/include/mach/imx7-regs.h | 23 + > arch/arm/mach-imx/include/mach/imx7.h | 59 ++ > arch/arm/mach-imx/include/mach/imx_cpu_types.h | 1 + > common/Kconfig | 8 + > drivers/clk/imx/Makefile | 2 + > drivers/clk/imx/clk-cpu.c | 110 +++ > drivers/clk/imx/clk-imx7.c | 881 +++++++++++++++++++++ > drivers/clk/imx/clk-pllv3.c | 23 +- > drivers/clk/imx/clk.h | 33 + > drivers/i2c/busses/i2c-imx.c | 1 + > drivers/mci/imx-esdhc.c | 15 +- > drivers/mci/mci-core.c | 78 +- > drivers/of/partition.c | 12 +- > drivers/phy/usb-nop-xceiv.c | 18 +- > drivers/pinctrl/imx-iomux-v3.c | 5 +- > drivers/serial/serial_imx.c | 4 + > drivers/usb/imx/chipidea-imx.c | 22 +- > drivers/usb/imx/imx-usb-misc.c | 87 +- > images/Makefile.imx | 5 + > include/mci.h | 1 + > include/serial/imx-uart.h | 5 + > include/usb/chipidea-imx.h | 4 +- > scripts/imx/imx-usb-loader.c | 21 +- > scripts/imx/imx.c | 1 + > 43 files changed, 1803 insertions(+), 77 deletions(-) > create mode 100644 Documentation/boards/imx/Element14-WaRP7.rst > create mode 100644 arch/arm/boards/element14-warp7/Makefile > create mode 100644 arch/arm/boards/element14-warp7/board.c > create mode 100644 arch/arm/boards/element14-warp7/flash-header-mx7-warp.imxcfg > create mode 100644 arch/arm/boards/element14-warp7/lowlevel.c > create mode 100644 arch/arm/dts/imx7s-warp.dts > create mode 100644 arch/arm/mach-imx/imx7.c > create mode 100644 arch/arm/mach-imx/include/mach/imx7-regs.h > create mode 100644 arch/arm/mach-imx/include/mach/imx7.h > create mode 100644 drivers/clk/imx/clk-cpu.c > create mode 100644 drivers/clk/imx/clk-imx7.c > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox BR, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
