On Thu, Nov 17, 2016 at 02:42:21PM +0100, Jan Remmet wrote: > Hello, > I'm trying to get hab signature working on a imx6. > > So far I have added > #include <mach/habv4-imx6-gencsf.h > to the .imxcfg flash header. > > and set > ONFIG_HABV4, CONFIG_HABV4_TABLE_BIN, CONFIG_HABV4_CSF_CRT_PEM and CONFIG_HABV4_IMG_CRT_PEM > > I also added this to images/Makefile.imx > > CFG_start_phytec_phycore_imx6q_som_emmc_1gib.pblx.simximg = $(board)/phytec-som-imx6/flash-header-phytec-pcm058-1gib.imxcfg > FILE_barebox-phytec-phycore-imx6q-som-emmc-1gib-signed.img = start_phytec_phycore_imx6q_som_emmc_1gib.pblx.simximg > image-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += barebox-phytec-phycore-imx6q-som-emmc-1gib-signed.img > > I got this: > ... > IMX-IMG images/start_phytec_phycore_imx6q_som_emmc_1gib.pblx.simximg > Missing --i argument > Failed to open > images/start_phytec_phycore_imx6q_som_emmc_1gib.pblx.simximg.csfbin: No such > file or directory > barebox/2016.09.0-phy1-r7.0/cst > failed > > Is my setup ok so far? Maybe this is an issue with my version of cst? > > It wants > -i, --input <csf text file>: > Input CSF text filename > > cst -v > Code Signing Tool release version BLN_CST_MAIN_02.03.00 Ok according to the cst Release_Notes.txt it was added in CST 2.3.2. I changed imx-image.c to write the csf buffer to a file, but ran into Error: Cannot open key file ../CSF1_1_sha256_4096_65537_v3_usr_key.pem 30345296:error:0907B068:PEM routines:PEM_READ_BIO_PRIVATEKEY:bad password read:pem_pkey.c:109: cst tool failed: No such file or directory Jan > > Jan > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
