Re: usb otg port not working on an imx25 soc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Giorgio,

On Mon, Nov 14, 2016 at 01:57:17PM +0100, iw3gtf@xxxxxxxx wrote:
> Hi,
> 
> I'm currently working on an embedded board with an imx25 soc and I want
> to enable the usb otg port of the soc; in my use case I just want the otg port
> to be configured in usb host mode and use the integrated UTMI phy.
> 
> I built barebox with usb support and the usb ports are actually found:

When USB does not work it's most likely that the usbmisc unit is not
properly configured. Have a look at mx25_initialize_usb_hw(). If you
previously loaded barebox with imx-usb-loader then you could try skipping
the initialization in mx25_initialize_usb_hw() completely.

I've seldomly seen that the actual EHCI driver or USB core is the
problem when no device is detected.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux