Re: [PATCH] mtd: nand_mxs: fix NAND error when change clk rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Christian,

thanks for the quick reply.

> >Can you give any hints that makes it simpler to verify your fix or anything?
> To reproduce the issue and test the fix I reseted the board in a loop.
> For this I added 'reset' to /env/bin/init. With 'reset" in /env/bin/init I
> saw the issue after 1 - 2 Minutes.
> Also I have done 1000 power cuts and resets without any error in our
> test rack.
> 
> power cut:
> 1. start barebox to prompt
> 2. power cut
> 
> soft reset:
> 1. start barebox to prompt
> 2. reset

We have deployed an updated barebox in our test setup that do
all our ON/OFF testing.
A quick grep from the serial logs shows that we have seen this
error message much more often than I originally anticipated.
So I expect to have feedback already tomorrow.

>From your information I am quite positive.

	Sam

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux