Linux USB Users

• Thread Index

• [rft]suspend/resume for appledisplay driver
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [patch]ldusb should signal an error in poll if the device is disconnected
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [patch]fix memory leak in usbtmc #2
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 2.6.30 1/1] usb-storage: handle unusual dev Realtek Usb Card Reader (0x0bda:0x0152)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: lsusb hang with 2.6.30
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• lsusb hang with 2.6.30
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• RE: [patch]full autosuspend support for the option driver
  • From: zhao.ming9@xxxxxxxxxx
• Re: [patch]fix memory leak in usbtmc's get_capabilities()
  • From: Tilman Schmidt <tilman@xxxxxxx>
• Re: 2.6.27- Sending uevent from a driver
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [patch]legousbtower: make poll notice disconnect
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [patch]fix memory leak in usbtmc's get_capabilities()
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [patch]suspend/resume support for usbtmc
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [patch]usbtmc can do IO to device after disconnect
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [patch]fix memory leak in usbtmc's get_capabilities()
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: S3C HS/OtG USB UDC driver status
  • From: Minkyu Kang <promsoft@xxxxxxxxx>
• Re: 2.6.27- Sending uevent from a driver
  • From: Daniel Ng <daniel.ng1234@xxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH 2.6.30 1/1] usb-storage: handle unusual dev Realtek Usb Card Reader (0x0bda:0x0152)
  • From: Giacomo Lozito <james@xxxxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Mario Limonciello <mario_limonciello@xxxxxxxx>
• Re: [Bugme-new] [Bug 13681] New: A number of usb Devices causes Oops messages and kernel panics.
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2.6.30 1/1] usb-storage: handle unusual dev Realtek Usb Card Reader (0x0bda:0x0152)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [PATCH 2.6.30 1/1] usb-storage: handle unusual dev Realtek Usb Card Reader (0x0bda:0x0152)
  • From: Giacomo Lozito <james@xxxxxxxxxxx>
• Re: [PATCH 7/8] Add EHCI support for MX27 and MX31 based boards
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [patch] buildfix ppc randconfig
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [patch] buildfix ppc randconfig
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Mario Limonciello <mario_limonciello@xxxxxxxx>
• [patch 08/12] MIPS: BCM63XX: Add USB EHCI support.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [patch 07/12] MIPS: BCM63XX: Add USB OHCI support.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [patch 00/12] Add support for Broadcom BCM63xx SoCs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: mx31 and fsl_usb2_udc driver: USB bus "blocked" at boot
  • From: Valentin Longchamp <valentin.longchamp@xxxxxxx>
• Re: [PATCH 7/8] Add EHCI support for MX27 and MX31 based boards
  • From: Valentin Longchamp <valentin.longchamp@xxxxxxx>
• Re: Patches for MX3 EHCI support [v2]
  • From: Valentin Longchamp <valentin.longchamp@xxxxxxx>
• Re: [PATCH 7/8] Add EHCI support for MX27 and MX31 based boards
  • From: Daniel Mack <daniel@xxxxxxxx>
• RE: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] cdc-acm: work around some broken devices
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How can I open usb device without knowing the vender and device id
  • From: loody <miloody@xxxxxxxxx>
• Re: [PATCH] cdc-acm: work around some broken devices
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [patch]full autosuspend support for the option driver
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] cdc-acm: work around some broken devices
  • From: Greg KH <greg@xxxxxxxxx>
• Re: How can I open usb device without knowing the vender and device id
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [patch] buildfix ppc randconfig
  • From: Subrata Modak <subrata@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: <Mario_Limonciello@xxxxxxxx>
• [PATCH] cdc-acm: work around some broken devices
  • From: Arseniy Lartsev <ars3n@xxxxxxxxx>
• Re: [PATCH] usb: m66592-udc buffer management update
  • From: Yoshihiro Shimoda <shimoda.yoshihiro@xxxxxxxxxxx>
• RE: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Arseniy Lartsev <ars3n@xxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 011/143] musb: split out CPPI interrupt handler
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 1/3] gadget: pxa25x uses gpio_is_valid
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 3/3] gadget: pxa25x: basic transceiver support
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch] gadget: rndis conformance tweak
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2/3] gadget: pxa25x compiler warning fix
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 011/143] musb: split out CPPI interrupt handler
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [patch] musb: silence "suspend as a_wait_vrise is_active" msgs
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2/2] musb: davinci dm6446evm GPIO renumbering
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 1/2] musb: davinci dm355 updates (remainder)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 010/143] musb_host: refactor URB giveback
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• RE: multiple gadget status
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: multiple gadget status
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: multiple gadget status
  • From: Wojciech Kromer <wojciech.kromer@xxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Arseniy Lartsev <ars3n@xxxxxxxxx>
• multiple gadget status
  • From: Wojciech Kromer <wojciech.kromer@xxxxxxxxxx>
• Re: multiple gadget status
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• multiple gadget status
  • From: Wojciech Kromer <wojciech.kromer@xxxxxxxxxx>
• How can I open usb device without knowing the vender and device id
  • From: loody <miloody@xxxxxxxxx>
• Re: [PATCH 011/143] musb: split out CPPI interrupt handler
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 010/143] musb_host: refactor URB giveback
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/2] USB: pxa25x_udc: use gpio_is_valid
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v2] usb: musb: Warn and check for OTG transceiver misconfiguration
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/2] USB: pxa25x_udc: add very basic otg_transceiver support
  • From: Philipp Zabel <philipp.zabel@xxxxxxxxx>
• [PATCH 1/2] USB: pxa25x_udc: use gpio_is_valid
  • From: Philipp Zabel <philipp.zabel@xxxxxxxxx>
• RE: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: <Mario_Limonciello@xxxxxxxx>
• Re: fc11 media mount change
  • From: jack craig <jackc@xxxxxxxxxxxxxxxxxxx>
• Re: fc11 media mount change
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Kay Sievers <kay.sievers@xxxxxxxx>
• fc11 media mount change
  • From: jack craig <jackc@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Explicitly disable BT radio using rfkill interface on suspend
  • From: Mario Limonciello <mario_limonciello@xxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] option: add Novatel Ovation MC760
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Arseniy Lartsev <ars3n@xxxxxxxxx>
• Re: [PATCH] option: add Novatel Ovation MC760
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] option: add Novatel Ovation MC760
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [Bugme-new] [Bug 13564] New: random general protection fault at boot time caused by khubd.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 010/143] musb_host: refactor URB giveback
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 010/143] musb_host: refactor URB giveback
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 011/143] musb: split out CPPI interrupt handler
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 010/143] musb_host: refactor URB giveback
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [Bugme-new] [Bug 13564] New: random general protection fault at boot time caused by khubd.
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 011/143] musb: split out CPPI interrupt handler
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 010/143] musb_host: refactor URB giveback
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13675] New: sierra_close sometimes crashes upon device removal
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.27- Sending uevent from a driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: How to merge 2.6.25 usb driver to 2.6.18?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13675] New: sierra_close sometimes crashes upon device removal
  • From: Peter Naulls <peter@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13675] New: sierra_close sometimes crashes upon device removal
  • From: Greg KH <greg@xxxxxxxxx>
• Re: How to merge 2.6.25 usb driver to 2.6.18?
  • From: loody <miloody@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13675] New: sierra_close sometimes crashes upon device removal
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13564] New: random general protection fault at boot time caused by khubd.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.27- Sending uevent from a driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How to merge 2.6.25 usb driver to 2.6.18?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How to merge 2.6.25 usb driver to 2.6.18?
  • From: loody <miloody@xxxxxxxxx>
• Re: platform_device_put() vs platform_device_unregister()?
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• platform_device_put() vs platform_device_unregister()?
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• 2.6.27- Sending uevent from a driver
  • From: Daniel Ng <daniel.ng1234@xxxxxxxxx>
• [patch]fix uninitialised variable in ti_do_download
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: + drivers-usb-serial-ti_usb_3410_5052c-fix-uninitialied-var-warning.patch added to -mm tree
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: + drivers-usb-serial-ti_usb_3410_5052c-fix-uninitialied-var-warning.patch added to -mm tree
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 7/8] Add EHCI support for MX27 and MX31 based boards
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] Move UVC definitions to linux/usb/video.h
  • From: Greg KH <greg@xxxxxxxxx>
• Re: How can I use start_frame in the struct usbdevfs_urb?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: How can I use start_frame in the struct usbdevfs_urb?
  • From: lepton <ytht.net@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13675] New: sierra_close sometimes crashes upon device removal
  • From: Peter Naulls <peter@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13564] New: random general protection fault at boot time caused by khubd.
  • From: Pauli Nieminen <suokkos@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13564] New: random general protection fault at boot time caused by khubd.
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] EHCI: check for STALL before other errors
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 3/8 ver. 2] EHCI: check for STALL before other errors
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] EHCI: check for STALL before other errors
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] EHCI: check for STALL before other errors
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: 2.6.30: suspend-to-ram, second s2r wakes up immediately
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13675] New: sierra_close sometimes crashes upon device removal
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8 ver 2] EHCI: report actual_length for iso transfers
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13675] New: sierra_close sometimes crashes upon device removal
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] EHCI: check for STALL before other errors
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: FW: ehci->watchdog timer panic
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/8 ver 2] EHCI: report actual_length for iso transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.30: suspend-to-ram, second s2r wakes up immediately
  • From: Thomas Meyer <thomas@xxxxxxxx>
• Re: External USB mass storage device no detecting
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 3/8] EHCI: check for STALL before other errors
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: 2.6.30: suspend-to-ram, second s2r wakes up immediately
  • From: Thomas Meyer <thomas@xxxxxxxx>
• Re: [PATCH 5/8] EHCI: report actual_length for iso transfers
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: How can I use start_frame in the struct usbdevfs_urb?
  • From: Greg KH <greg@xxxxxxxxx>
• RE: FW: ehci->watchdog timer panic
  • From: "Yang Fei-AFY095" <fei.yang@xxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: list <list@xxxxxxxxxxx>
• Re: [PATCH 4/8] USB: add API for userspace drivers to "claim" ports
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 4/8] USB: add API for userspace drivers to "claim" ports
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Geoff Levand <geoffrey.levand@xxxxxxxxxxx>
• Re: [PATCH 4/8] USB: add API for userspace drivers to "claim" ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: FW: ehci->watchdog timer panic
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] USB: add API for userspace drivers to "claim" ports
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] USB: add API for userspace drivers to "claim" ports
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/8] Add EHCI support for MX27 and MX31 based boards
  • From: Daniel Mack <daniel@xxxxxxxx>
• Re: [PATCH 4/8] USB: add API for userspace drivers to "claim" ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] USB: add API for userspace drivers to "claim" ports
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• FW: ehci->watchdog timer panic
  • From: "Yang Fei-AFY095" <fei.yang@xxxxxxxxxxxx>
• Re: [PATCH 4/8] USB: add API for userspace drivers to "claim" ports
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 8/8] USB: handle zero-length usbfs submissions correctly
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 7/8] USB: make the "usbfs_snoop" log more pertinent
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 6/8] USB: make intf.pm_usage an atomic_t
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/8] EHCI: report actual_length for iso transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/8] USB: add API for userspace drivers to "claim" ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/8] EHCI: check for STALL before other errors
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/8] EHCI: use the new clear_tt_buffer interface
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/8] USB: change the clear_tt_buffer interface
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/8] Miscellaneous USB patches for 2.6.31, 2.6.32
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Arseniy Lartsev <ars3n@xxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: usb-serial oddie
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Arseniy Lartsev <ars3n@xxxxxxxxx>
• usb-serial oddie
  • From: Kees Schoenmakers <k.schoenmakers@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Marcus Better <marcus@xxxxxxxxx>
• [PATCH v2] usb: musb: Warn and check for OTG transceiver misconfiguration
  • From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
• [PATCH 3/3 v5] EHCI: Support Intel Moorestown EHCI controller SRAM for periodic descriptor caching
  • From: Alek Du <alek.du@xxxxxxxxx>
• [PATCH 2/3 v5] EHCI: Support Intel Moorestown MPH and OTG host
  • From: Alek Du <alek.du@xxxxxxxxx>
• [PATCH 1/3 v5] EHCI: Add Intel Moorestown EHCI controller HOSTPCx extensions and support phy low power mode
  • From: Alek Du <alek.du@xxxxxxxxx>
• [PATCH 0/3 v5] EHCI: Add Intel Moorestown Platform Multi-Port Host and OTG Host Controller Support
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH] usb: musb: Check for NULL pointers when no OTG transceiver used
  • From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
• Re: [PATCH] usb: musb: Check for NULL pointers when no OTG transceiver used
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] usb: musb: Check for NULL pointers when no OTG transceiver used
  • From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
• Re: [PATCH] usb: musb: Check for NULL pointers when no OTG transceiver used
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] usb: musb: Check for NULL pointers when no OTG transceiver used
  • From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
• Re: possible memleak in devio.c::processcompl
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• External USB mass storage device no detecting
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• Re: musb Rx DMA (Mentor) failure when one DMA receive is started before the previous completes (??)
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: musb Rx DMA (Mentor) failure when one DMA receive is started before the previous completes (??)
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• musb Rx DMA (Mentor) failure when one DMA receive is started before the previous completes (??)
  • From: Hugo Vincent <hugo.vincent@xxxxxxxxx>
• Re: gadgetfs isn't sending interrupt messages
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: gadgetfs isn't sending interrupt messages
  • From: Adam Nielsen <a.nielsen@xxxxxxxxxxx>
• Re: possible memleak in devio.c::processcompl
  • From: Markus Rechberger <mrechberger@xxxxxxxxx>
• Re: possible memleak in devio.c::processcompl
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Arseniy Lartsev <ars3n@xxxxxxxxx>
• [patch]fix memleak in usbfs
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: How can I use start_frame in the struct usbdevfs_urb?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: possible memleak in devio.c::processcompl
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• possible memleak in devio.c::processcompl
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: gadgetfs isn't sending interrupt messages
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: Handling short transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: gadgetfs isn't sending interrupt messages
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Handling short transfers
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: PROBLEM: USB ACM device does not work
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: gadgetfs isn't sending interrupt messages
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH 47/62] drivers/usb: Remove unnecessary semicolons
  • From: Joe Perches <joe@xxxxxxxxxxx>
• How can I use start_frame in the struct usbdevfs_urb?
  • From: lepton <ytht.net@xxxxxxxxx>
• How to merge 2.6.25 usb driver to 2.6.18?
  • From: loody <miloody@xxxxxxxxx>
• gadgetfs isn't sending interrupt messages
  • From: Adam Nielsen <a.nielsen@xxxxxxxxxxx>
• [RFC] Move UVC definitions to linux/usb/video.h
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• Re: 2.6.30 and USB auto-suspend
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Handling short transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Handling short transfers
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• [PATCH] option.c: Support QUALCOMM iCON 210
  • From: Hanno Böck <hanno@xxxxxxxxx>
• Re: 2.6.30 and USB auto-suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB level power management for wireless dongles
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: 2.6.30 and USB auto-suspend
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: 2.6.30 and USB auto-suspend
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.30 and USB auto-suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: jack craig <jackc@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.30 and USB auto-suspend
  • From: Alberto Gonzalez <alberto6674@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Geoff Levand <geoffrey.levand@xxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13601] New: Hard crash connecting via Huawei E169 + umtsmon
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: Check for NULL pointers when no OTG transceiver used
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: jack craig <jackc@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usbtmc driver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: jack craig <jackc@xxxxxxxxxxxxxxxxxxx>
• Re: Handling short transfers
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• Re: Handling short transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: Greg KH <greg@xxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: jack craig <jackc@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.30 and USB auto-suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxx>
• Re: Handling short transfers
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Geoff Levand <geoffrey.levand@xxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13605] New: usb-storage: broken with new Nokia E75 (Symbian S60 9.3 FP2)
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: permissible range of pm counters
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Host controller ID
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13605] New: usb-storage: broken with new Nokia E75 (Symbian S60 9.3 FP2)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Handling short transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Handling short transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: add missing class descriptions used in usb/devices file
  • From: Frans Pop <elendil@xxxxxxxxx>
• Re: HCD behavior for halted endpoints with multiple pending URBs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: abhishekkumar <abhishekkumar@xxxxxxxxxxxxxxx>
• AW: usbtmc driver
  • From: Zimmermann Christoph <christoph.zimmermann@xxxxxx>
• [PATCH] usb: musb: Check for NULL pointers when no OTG transceiver used
  • From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
• Re: [PATCH 1/3 v3] at91/USB: Add USB gadget driver selection for at91sam9g45 series
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH] at91/USB: Add USB EHCI driver for at91sam9g45 series
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 4/4 v4] EHCI: split ehci_qh - core part changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• [PATCH 3/4 v4] EHCI: split ehci_qh - ehci-dbg.c changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH 7/8] Add EHCI support for MX27 and MX31 based boards
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4 v4] EHCI: split ehci_qh - ehci-mem.c and ehci-hcd.c changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• [PATCH 1/4 v4] EHCI: split ehci_qh - header file changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH 7/8] Add EHCI support for MX27 and MX31 based boards
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Patches for MX3 EHCI support [v2]
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Issue with Oxford OXU210HP HCD driver
  • From: Amit Walambe <amit.walambe@xxxxxxxxxxxx>
• [PATCH] usb: m66592-udc buffer management update
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• permissible range of pm counters
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Host controller ID
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• Re: Host controller ID
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 3/3 v3] at91/USB: Add USB EHCI driver for at91sam9g45 series
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/3 v3] at91/USB: modify OHCI driver to allow shared interrupts
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/3 v3] at91/USB: Add USB gadget driver selection for at91sam9g45 series
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Host controller ID
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb.ids update
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• Reconnect notification for ACM CDC Gadget Serial TTY?
  • From: Daniel Ng <daniel.ng1234@xxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: jack craig <jackc@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13605] New: usb-storage: broken with new Nokia E75 (Symbian S60 9.3 FP2)
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Handling short transfers
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• HCD behavior for halted endpoints with multiple pending URBs
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: ich <ich@xxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: ich <ich@xxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: Handling short transfers
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb.ids update
  • From: "Stephen J. Gowdy" <gowdy@xxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: usb.ids update
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb.ids update
  • From: "Stephen J. Gowdy" <gowdy@xxxxxxx>
• Re: [PATCH 0/4] USB audio gadget driver header cleanup
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13624] New: usb: wrong autosuspend initialization
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: Greg KH <greg@xxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: jack craig <jackc@xxxxxxxxxxxxxxxxxxx>
• Re: mx31 and fsl_usb2_udc driver: USB bus "blocked" at boot
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• usbutils 0.84 release
  • From: Greg KH <greg@xxxxxxxxx>
• usb.ids update
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: udev-> libusb issue, already posted to libusb group
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Modified usb-devices.sh script - final(?) version
  • From: Greg KH <greg@xxxxxxxxx>
• udev-> libusb issue, already posted to libusb group
  • From: jack craig <jackc@xxxxxxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script - final(?) version
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• Re: new product/vendor ID for usb gadget
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Modified usb-devices.sh script - final(?) version
  • From: Frans Pop <elendil@xxxxxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script - final(?) version
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script - final(?) version
  • From: Frans Pop <elendil@xxxxxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script - final(?) version
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [rft]basic autosuspend support for option driver
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH 7/8] Add EHCI support for MX27 and MX31 based boards
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH 8/8] MX3: add USB support for lilly1131
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH 6/8] MXC: Add support for ULPI Viewports
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH 5/8] USB: Add xcvr functions for NXP's ISP1504 transceiver
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH 4/8] USB: add slim framework for external transceivers
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH 3/8] MX3: add additional USB pins to iomux
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH 2/8] ehci mxc: Fix clocks
  • From: Daniel Mack <daniel@xxxxxxxx>
• [PATCH 1/8] MX3: Add USB platform devices and resources
  • From: Daniel Mack <daniel@xxxxxxxx>
• Patches for MX3 EHCI support [v2]
  • From: Daniel Mack <daniel@xxxxxxxx>
• new product/vendor ID for usb gadget
  • From: Mandeep Sandhu <mandeepsandhu.chd@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: abhishekkumar <abhishekkumar@xxxxxxxxxxxxxxx>
• Re: error path in usb serial if tty_port_block_til_ready fails
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: error path in usb serial if tty_port_block_til_ready fails
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• mx31 and fsl_usb2_udc driver: USB bus "blocked" at boot
  • From: Valentin Longchamp <valentin.longchamp@xxxxxxx>
• Re: error path in usb serial if tty_port_block_til_ready fails
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Modified usb-devices.sh script - final(?) version
  • From: Frans Pop <elendil@xxxxxxxxx>
• Re: [PATCH 2/4 v3] EHCI: Support Intel Moorestown MPH and OTG host
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: error path in usb serial if tty_port_block_til_ready fails
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: error path in usb serial if tty_port_block_til_ready fails
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] Fix oops when closing ACM tty device right after open has failed.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 2/3] Fix oops when closing ACM tty device right after open has failed.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 2/3] Fix oops when closing ACM tty device right after open has failed.
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• [PATCH 3/3] Fix oops when unexisting usb serial device is opened.
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• [PATCH 2/3] Fix oops when closing ACM tty device right after open has failed.
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• [PATCH 1/3] Return ENODEV instead of EINVAL when trying to open ACM device.
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] Return ENODEV instead of EINVAL when trying to open ACM device.
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] Return ENODEV instead of EINVAL when trying to open ACM device.
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• error path in usb serial if tty_port_block_til_ready fails
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 3/3] Fix oops when unexisting usb serial device is opened.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 2/3] Fix oops when closing ACM tty device right after open has failed.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 1/3] Return ENODEV instead of EINVAL when trying to open ACM device.
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 06/07] usb: rework musb suspend()/resume_early()
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 00/07] pm: remove late/early platform driver pm callbacks V2
  • From: Greg KH <gregkh@xxxxxxx>
• error path in usb serial if tty_port_block_til_ready fails
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Asynchronous Mass storage driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Libusb-devel] libusb losing data on timeout/cancellation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/07] pm: remove late/early platform driver pm callbacks V2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/07] pm: remove late/early platform driver pm callbacks V2
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [patch] usb: whci-hcd: make endpoint_reset method async
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [patch] usb: whci-hcd: make endpoint_reset method async
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [Libusb-devel] libusb losing data on timeout/cancellation
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [patch] usb: whci-hcd: make endpoint_reset method async
  • From: Greg KH <greg@xxxxxxxxx>
• [patch] usb: whci-hcd: make endpoint_reset method async
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Asynchronous Mass storage driver
  • From: Ramya Desai <ramya.desai@xxxxxxxxx>
• Re: [PATCH 07/07] pm: remove platform device suspend_late()/resume_early() V2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MUSB: Fix Null Pointer dereference issues in musb gadget code
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Regarding USB error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Host controller ID
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Not able to read USB speed and descriptor
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] MUSB: Fix Null Pointer dereference issues in musb gadget code
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3] EHCI: add need_io_watchdog flag to ehci_hcd
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: Host controller ID
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Regarding USB error
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: abhishekkumar <abhishekkumar@xxxxxxxxxxxxxxx>
• [PATCH 4/4 v3] EHCI: split ehci_qh - core part changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• [PATCH 2/4 v3] EHCI: split ehci_qh - ehci-mem.c and echi-hcd,c changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• [PATCH 3/4 v3] EHCI: split ehci_qh - ehci-dbg.c changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• [PATCH 1/4 v3] EHCI: split ehci_qh - header file changes
  • From: Alek Du <alek.du@xxxxxxxxx>
• [PATCH 3/3] Fix oops when unexisting usb serial device is opened.
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• [PATCH 2/3] Fix oops when closing ACM tty device right after open has failed.
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• [PATCH 1/3] Return ENODEV instead of EINVAL when trying to open ACM device.
  • From: Thadeu Lima de Souza Cascardo <cascardo@xxxxxxxxxxxxxx>
• Re: Regarding USB error
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• Re: S3C HS/OtG USB UDC driver status
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• S3C HS/OtG USB UDC driver status
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Host controller ID
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• [PATCH 07/07] pm: remove platform device suspend_late()/resume_early() V2
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 05/07] i2c: rework i2c-s3c2410 suspend_late()/resume() V2
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 02/07] dma: rework dw_dmac suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 01/07] arm: rework omap suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 03/07] dma: rework txx9dmac suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 00/07] pm: remove late/early platform driver pm callbacks V2
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 06/07] usb: rework musb suspend()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH 04/07] i2c: rework i2c-pxa suspend_late()/resume_early()
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3 v3] at91/USB: Add USB gadget driver selection for at91sam9g45 series
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: Not able to read USB speed and descriptor
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• RE: [PATCH] MUSB: Fix Null Pointer dereference issues in musb gadget code
  • From: "Maulik" <x0082077@xxxxxx>
• Re: [PATCH 3/4] EHCI: Add EHCI OTG HNP support
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE:[rft]autosuspend for option driver (resend)
  • From: zhao.ming9@xxxxxxxxxx
• Re: [PATCH 3/4] EHCI: Add EHCI OTG HNP support
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: Switchable devices (storage/serial)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/4] EHCI: Support Intel Moorestown MPH and OTG host
  • From: Alek Du <alek.du@xxxxxxxxx>
• RE: Switchable devices (storage/serial)
  • From: "Brad Lu" <Brad.Lu@xxxxxxxxx>
• Re: [PATCH 4/4 v2] EHCI: Support Intel Moorestown EHCI controller SRAM QH/QTD/ITD/SITD pool caching
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH 2/4] EHCI: Support Intel Moorestown MPH and OTG host
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v2] EHCI: Add no_io_watchdog feature to ehci_hcd
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 3/4] EHCI: Add EHCI OTG HNP support
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/4] EHCI: Support Intel Moorestown MPH and OTG host
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH 3/4] EHCI: Add EHCI OTG HNP support
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH v2] EHCI: Add no_io_watchdog feature to ehci_hcd
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH 3/4] EHCI: Add EHCI OTG HNP support
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/4] EHCI: Support Intel Moorestown MPH and OTG host
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v3] [resend] EHCI: split ehci_qh structure into hw and sw parts
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH] EHCI: Make ehci_qh structure items all 32bit aligned
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH v3] [resend] EHCI: split ehci_qh structure into hw and sw parts
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] EHCI: Make ehci_qh structure items all 32bit aligned
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v2] EHCI: Add no_io_watchdog feature to ehci_hcd
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH v3] [resend] EHCI: split ehci_qh structure into hw and sw parts
  • From: "Du, Alek" <alek.du@xxxxxxxxx>
• Re: [PATCH v3] [resend] EHCI: split ehci_qh structure into hw and sw parts
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/3 v3] at91/USB: Add USB gadget driver selection for at91sam9g45 series
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Frans Pop <elendil@xxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Frans Pop <elendil@xxxxxxxxx>
• Re: [Libusb-devel] libusb losing data on timeout/cancellation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Frans Pop <elendil@xxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Frans Pop <elendil@xxxxxxxxx>
• Handling short transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] RFC: Add asynchronous reset endpoint call to USB core.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] MUSB: Fix Null Pointer dereference issues in musb gadget code
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Support for Quatech ESU2-100 USB 2.0 8-port serial adaptor
  • From: Richard Ash <richardashaudacity@xxxxxxxxxxxxxx>
• invalid "select" of non-existent CONFIG variable
  • From: "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx>
• [PATCH 1/3 v3] at91/USB: Add USB gadget driver selection for at91sam9g45 series
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 3/3 v3] at91/USB: Add USB EHCI driver for at91sam9g45 series
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH 2/3 v3] at91/USB: modify OHCI driver to allow shared interrupts
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: Power control with EHCI hubs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: Avoid double spin_lock_init on usbhid->lock (resend)
  • From: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxx>
• Re: [PATCH] RFC: Add asynchronous reset endpoint call to USB core.
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [PATCH] RFC: Add asynchronous reset endpoint call to USB core.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Not able to read USB speed and descriptor
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13530] New: failed to rmmod g_file_storage.ko
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MUSB: Fix Null Pointer dereference issues in musb gadget code
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: isp1760: allow platform devices to customize devflags
  • From: Mike Frysinger <vapier.adi@xxxxxxxxx>
• Re: [PATCH] USB: isp1760: allow platform devices to customize devflags
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Not able to read USB speed and descriptor
  • From: Prabhu Chawandi <prabhu.chavandi@xxxxxxxxx>
• Re: [PATCH] HID: Avoid double spin_lock_init on usbhid->lock (resend)
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH] USB: isp1760: allow platform devices to customize devflags
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: Getting Philips Speechmike to work
  • From: Jiri Kosina <jkosina@xxxxxxx>
• [PATCH] USB: isp1760: add missing __devexit_p()
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• [PATCH] MUSB: Fix Null Pointer dereference issues in musb gadget code
  • From: Maulik Mankad <x0082077@xxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH] HID: Avoid double spin_lock_init on usbhid->lock (resend)
  • From: Sergey Senozhatsky <sergey.senozhatsky@xxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13505] New: USB keyboard/mouse unresponsive for few seconds at a time
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Power control with EHCI hubs
  • From: Mitch Davis <mjd-linux-usb@xxxxxxxxx>
• Re: [PATCH] RFC: xhci: Deal with stalled endpoints.
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: [PATCH 096/143] USB: gadget: add USB Audio Gadget driver
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] RFC: Add asynchronous reset endpoint call to USB core.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v3] [resend] EHCI: split ehci_qh structure into hw and sw parts
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH] RFC: xhci: Deal with stalled endpoints. Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>,
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] RFC: Add asynchronous reset endpoint call to USB core.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] [resend] EHCI: split ehci_qh structure into hw and sw parts
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13530] New: failed to rmmod g_file_storage.ko
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [stable] [Bugme-new] [Bug 13524] New: Disconnecting Huawei E169 causes kernel oops
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13524] New: Disconnecting Huawei E169 causes kernel oops
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13516] New: Disconnecting PL2303 device while cu is connected to it cause oops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13505] New: USB keyboard/mouse unresponsive for few seconds at a time
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13516] New: Disconnecting PL2303 device while cu is connected to it cause oops
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13505] New: USB keyboard/mouse unresponsive for few seconds at a time
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13505] New: USB keyboard/mouse unresponsive for few seconds at a time
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [Bugme-new] [Bug 13505] New: USB keyboard/mouse unresponsive for few seconds at a time
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] uwb: hwarc_get_event_size() errors ignored
  • From: David Vrabel <david.vrabel@xxxxxxx>
• Re: [PATCH v3] [resend] EHCI: split ehci_qh structure into hw and sw parts
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH] uwb: hwarc_get_event_size() errors ignored
  • From: Roel Kluin <roel.kluin@xxxxxxxxx>
• Re: [Bugme-new] [Bug 13304] New: ehci_hcd module causing problems in using usb head phone
  • From: abhishekkumar <abhishekkumar@xxxxxxxxxxxxxxx>
• Re: Modified usb-devices.sh script
  • From: Frans Pop <elendil@xxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v3] [resend] EHCI: split ehci_qh structure into hw and sw parts
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• PROBLEM: kernel oops with g_serial USB gadget on 2.6.30
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: Switchable devices (storage/serial)
  • From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
• [PATCH v3] [resend] EHCI: split ehci_qh structure into hw and sw parts
  • From: Alek Du <alek.du@xxxxxxxxx>
• Re: [PATCH 0/4] USB audio gadget driver header cleanup
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] [RESUBMIT] Add Intel Langwell USB Device Controller driver
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 3/4] USB audio gadget: Prefix all macro definitions with UAC_ in linux/usb/audio.h
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• [PATCH 4/4] USB audio gadget: Un-inline generic_[gs]et_cmd
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>