From: Magnus Damm <damm@xxxxxxxxxx>
This patch updates the m66592-udc buffer management code.
Use fixed buffers for bulk and isochronous pipes, also make
sure to handle the isochronous-as-bulk case. With fixed buffers
there is no need to keep track of used buffers with bi_bufnum.
Also, this fixes a potential buffer offset problem where the
base offset incorrectly varies with the number of pipes used.
With this patch applied it is possible to use m66592-udc for
both Ethernet and Serial using CONFIG_USB_CDC_COMPOSITE.
Signed-off-by: Magnus Damm <damm@xxxxxxxxxx>
---
This patch is the same as before but sent to the correct usb list, duh.
Tested on SH7722 Migo-R.
drivers/usb/gadget/m66592-udc.c | 34 ++++++++++++----------------------
drivers/usb/gadget/m66592-udc.h | 1 -
2 files changed, 12 insertions(+), 23 deletions(-)
--- 0001/drivers/usb/gadget/m66592-udc.c
+++ work/drivers/usb/gadget/m66592-udc.c 2009-06-26 15:12:37.000000000 +0900
@@ -37,7 +37,7 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yoshihiro Shimoda");
MODULE_ALIAS("platform:m66592_udc");
-#define DRIVER_VERSION "18 Oct 2007"
+#define DRIVER_VERSION "26 Jun 2009"
/* module parameters */
#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
@@ -276,24 +276,27 @@ static int pipe_buffer_setting(struct m6
buf_bsize = 0;
break;
case M66592_BULK:
- bufnum = m66592->bi_bufnum +
- (info->pipe - M66592_BASE_PIPENUM_BULK) * 16;
- m66592->bi_bufnum += 16;
+ /* isochronous pipes may be used as bulk pipes */
+ if (info->pipe > M66592_BASE_PIPENUM_BULK)
+ bufnum = info->pipe - M66592_BASE_PIPENUM_BULK;
+ else
+ bufnum = info->pipe - M66592_BASE_PIPENUM_ISOC;
+
+ bufnum = M66592_BASE_BUFNUM + (bufnum * 16);
buf_bsize = 7;
pipecfg |= M66592_DBLB;
if (!info->dir_in)
pipecfg |= M66592_SHTNAK;
break;
case M66592_ISO:
- bufnum = m66592->bi_bufnum +
+ bufnum = M66592_BASE_BUFNUM +
(info->pipe - M66592_BASE_PIPENUM_ISOC) * 16;
- m66592->bi_bufnum += 16;
buf_bsize = 7;
break;
}
- if (m66592->bi_bufnum > M66592_MAX_BUFNUM) {
- pr_err("m66592 pipe memory is insufficient(%d)\n",
- m66592->bi_bufnum);
+
+ if (buf_bsize && ((bufnum + 16) >= M66592_MAX_BUFNUM)) {
+ pr_err("m66592 pipe memory is insufficient\n");
return -ENOMEM;
}
@@ -313,17 +316,6 @@ static void pipe_buffer_release(struct m
if (info->pipe == 0)
return;
- switch (info->type) {
- case M66592_BULK:
- if (is_bulk_pipe(info->pipe))
- m66592->bi_bufnum -= 16;
- break;
- case M66592_ISO:
- if (is_isoc_pipe(info->pipe))
- m66592->bi_bufnum -= 16;
- break;
- }
-
if (is_bulk_pipe(info->pipe)) {
m66592->bulk--;
} else if (is_interrupt_pipe(info->pipe))
@@ -1603,8 +1595,6 @@ static int __init m66592_probe(struct pl
m66592->timer.data = (unsigned long)m66592;
m66592->reg = reg;
- m66592->bi_bufnum = M66592_BASE_BUFNUM;
-
ret = request_irq(irq, m66592_irq, IRQF_DISABLED | IRQF_SHARED,
udc_name, m66592);
if (ret < 0) {
--- 0001/drivers/usb/gadget/m66592-udc.h
+++ work/drivers/usb/gadget/m66592-udc.h 2009-06-26 15:12:14.000000000 +0900
@@ -506,7 +506,6 @@ struct m66592 {
int interrupt;
int isochronous;
int num_dma;
- int bi_bufnum; /* bulk and isochronous's bufnum */
};
#define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget)
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
