Linux IDE
[Prev Page][Next Page]
- [PATCH 08/18] ide-cd: simplify request issuing path, (continued)
- CDC_PLAY_AUDIO check in cdrom_count_tracks() and other oddities,
Tejun Heo
- Re: ahci.c,
Jeff Garzik
- [PATCH 6/6] opti621: add PIO 4 support,
Bartlomiej Zolnierkiewicz
- [PATCH 5/6] opti621: use pre-calculated PIO timings,
Bartlomiej Zolnierkiewicz
- [PATCH 4/6] opti621: program devices timings separately in ->set_pio_mode,
Bartlomiej Zolnierkiewicz
- [PATCH 3/6] opti621: use PCI clock value provided by controller,
Bartlomiej Zolnierkiewicz
- [PATCH 1/6] opti621: disable read prefetch,
Bartlomiej Zolnierkiewicz
- [PATCH 2/6] opti621: remove DMA support,
Bartlomiej Zolnierkiewicz
- [PATCH 5/5] sgiioc4: call ide_find_port_slot() later,
Bartlomiej Zolnierkiewicz
- [PATCH 3/5] icside: always try to probe first interface,
Bartlomiej Zolnierkiewicz
- [PATCH 2/5] rapide: fix rapide_probe() return value,
Bartlomiej Zolnierkiewicz
- [PATCH 1/5] ide-cs: fix probing and add warm-plug support,
Bartlomiej Zolnierkiewicz
- Re: [KERNEL 2.6.26-rc4] bugreport : pata_pcmcia with Sandisk Extreme III 8GB,
Dominik Brodowski
- Promise SATA300 TX4,
MisterE
- [PATCH 01/14] cmd640: fix warm-plug support for the secondary interface,
Bartlomiej Zolnierkiewicz
- [PATCH 02/14] ide: ->port_init_devs -> ->init_dev,
Bartlomiej Zolnierkiewicz
- [PATCH 03/14] cmd640: add ->init_dev method,
Bartlomiej Zolnierkiewicz
- [PATCH 04/14] rapide: use struct ide_port_info,
Bartlomiej Zolnierkiewicz
- [PATCH 05/14] ide-h8300: use struct ide_port_info,
Bartlomiej Zolnierkiewicz
- [PATCH 06/14] ide_platform: use struct ide_port_info,
Bartlomiej Zolnierkiewicz
- [PATCH 07/14] ide: print message on error in ide_find_port_slot(),
Bartlomiej Zolnierkiewicz
- [PATCH 08/14] ide-h8300: print driver banner message early,
Bartlomiej Zolnierkiewicz
- [PATCH 09/14] ide-pnp: print driver banner message early,
Bartlomiej Zolnierkiewicz
- [PATCH 10/14] ide: allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE,
Bartlomiej Zolnierkiewicz
- [PATCH 12/14] ide: remove needless includes from ide.c,
Bartlomiej Zolnierkiewicz
- [PATCH 13/14] ide: remove needless includes from ide-taskfile.c,
Bartlomiej Zolnierkiewicz
- [PATCH 11/14] ide: remove superfluous BUG_ON() from set_geometry_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 14/14] ide: remove needless includes from setup-pci.c,
Bartlomiej Zolnierkiewicz
- [PATCH] pata_amd: (TEST) See if the ATAPI reports of problems are related to the FIFO,
Alan Cox
- [PATCH 1/5] powerpc: remove mpc8xx-ide driver,
arnd
- ata13.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen,
Ben Martin
- [PATCH #upstream 1/2] libata-eh: update atapi_eh_request_sense() to take @dev instead of @qc,
Tejun Heo
- [2.6 patch] export ide_doubler,
Adrian Bunk
- [2.6 patch] fix BLK_DEV_HD_ONLY on ARM dependencies,
Adrian Bunk
- [PATCH #upstream-fixes] ahci: workarounds for mcp65,
Tejun Heo
- ata_piix on MacBook4,1: CD/DVD drive often fails to work,
MATSUBAYASHI, 'Shaolin' Kohji
- Re: [PATCH] swarm: use struct ide_port_info,
Maciej W. Rozycki
- [PATCH] palm_bk3710: add warm-plug support,
Bartlomiej Zolnierkiewicz
- Marvell 6141 on an ASUS M2N32-WS Motherboard,
Brad Campbell
- [patch 10/50] libata: force hardreset if link is in powersave mode,
Chris Wright
- [PATCH 4/4] ide: tighten checks on PCI BARs in ide_hwif_configure(),
Bartlomiej Zolnierkiewicz
- [PATCH 2/4] icside: use ide_init_port_hw(),
Bartlomiej Zolnierkiewicz
- [PATCH 3/4] sgiioc4: use driver name for resource allocation,
Bartlomiej Zolnierkiewicz
- [PATCH 1/4] icside: don't use hwif->hwif_data,
Bartlomiej Zolnierkiewicz
- ide cdrom problems on new imac,
Jason Keltz
- 2.6.26-rc5 DOA on mac g5,
Andrew Morton
- Re: [Bugme-new] [Bug 10860] New: total system freeze at boot with 2.6.26-rc,
Andrew Morton
- [PATCH] Support SB700 SATA controller PMP,
Shane Huang
- patch "libata-sff: Fix oops for pnp devices with no ctl" causes regression,
Nick Piggin
- Re: [Bugme-new] [Bug 10854] New: CDROM is nor detected with libata and 3Ware.,
Andrew Morton
- [PATCH] SB600 SATA controller PMP support,
Shane Huang
- [RFC] expand link_power_management_policy definition,
Kristen Carlson Accardi
- [patch] libata:ahci: enclosure management support (resend),
Kristen Carlson Accardi
- [PATCH] ata acer short cable quirks,
maximilian attems
- [PATCH] ata: blacklist FUJITSU MHW2160BH PL,
maximilian attems
- Mounting CF flash card in 2.6.25,
vb
- hdparm-8.7 is released,
Mark Lord
- [PATCH 1/9] ide: fix host drivers missing hwif->chipset initialization,
Bartlomiej Zolnierkiewicz
- [PATCH 1/1] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices,
Brian King
- [PATCH v2 -mm 0/6] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack),
FUJITA Tomonori
- Why my USB disk drive is mounted "WriteProtect is on"?,
Peter Teoh
- [PATCH] ide-generic: add missing hwif->chipset setup,
Bartlomiej Zolnierkiewicz
- Correct partition table geometry?(Story included),
Tuc at T-B-O-H.NET
- Wasn't thinking (Was: Correct partition table geometry?),
Tuc at T-B-O-H.NET
- [PATCH 3/9] pcmcia: add another pata/ide ID,
Dominik Brodowski
- [PATCH 1/9] pcmcia: add an pata/ide ID,
Dominik Brodowski
- problem with sata_nv and SATA<>PATA bridge (2.6.18/2.6.24),
Mark Paulus
- Re: 2.6.25: sata_sil freezes, hard resets port.,
Tejun Heo
- <Possible follow-ups>
- Re: 2.6.25: sata_sil freezes, hard resets port.,
Andrew Henry
- Re: 2.6.25: sata_sil freezes, hard resets port.,
Andrew Henry
- Re: 2.6.25: sata_sil freezes, hard resets port.,
Andrew Henry
- Re: 2.6.25: sata_sil freezes, hard resets port.,
Henry, Andrew
- Re: 2.6.25: sata_sil freezes, hard resets port.,
Henry, Andrew
- [PATCH 05/37] ata: use get/put_endian helpers,
Harvey Harrison
- [PATCH v2.6.26-rc4] ata: Convert deprecated static spinlock_t lock instance to static DEFINE_SPINLOCK(lock),
Pradeep Singh Rautela
- RESEND: [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl,
Alan Cox
- [PATCH #upstream-fixes] ata_piix: fix macbook ich8m problems,
Tejun Heo
- [BUG ?] kmalloc() with GFP_KERNEL while holding spinlock ?,
Li Zefan
- [PATCH 00/21] ide: convert ide-timing.h to ide-timings.c library,
Bartlomiej Zolnierkiewicz
- [PATCH 01/21] ide: remove needless includes from ide-lib.c,
Bartlomiej Zolnierkiewicz
- [PATCH 02/21] ide: remove unused XFER_UDMA_SLOW,
Bartlomiej Zolnierkiewicz
- [PATCH 03/21] ide: use u8 for xfer modes in ide-timing.h,
Bartlomiej Zolnierkiewicz
- [PATCH 04/21] ide: move some bits from ide-timing.h to <linux/ide.h>,
Bartlomiej Zolnierkiewicz
- [PATCH 05/21] ide: remove XFER_* masks from ide-timing.h,
Bartlomiej Zolnierkiewicz
- [PATCH 06/21] ide: checkpatch.pl fixes for ide-timing.h,
Bartlomiej Zolnierkiewicz
- [PATCH 07/21] ide: convert ide-timing.h to ide-timings.c library,
Bartlomiej Zolnierkiewicz
- [PATCH 08/21] ali14xx: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 09/21] ht6560b: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 10/21] qd65xx: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 11/21] alim15x3: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 12/21] cmd640: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 13/21] cmd64x: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 14/21] cy82c693: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 15/21] opti621: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 16/21] sl82c105: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 17/21] ide-mpc8xx: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 18/21] ide-pmac: convert to use ide_timing_find_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH 21/21] ide: move PIO blacklist to ide-pio-blacklist.c,
Bartlomiej Zolnierkiewicz
- [PATCH 20/21] ide: remove no longer used ide_pio_timings[],
Bartlomiej Zolnierkiewicz
- [PATCH 19/21] ide: move ide_pio_cycle_time() to ide-timings.c,
Bartlomiej Zolnierkiewicz
- [PATCH] libata: Handle bay devices in dock stations,
Holger Macht
- Re: ata_piix on MacBook4,1: fail to startup in a certain situation,
MATSUBAYASHI 'Shaolin' Kohji
- [PATCH 01/03] sata_mv: move SOC_FLAG to hpriv,
Mark Lord
- [Bug 10803] New: Kernel freeze on accesing CD-ROM or HDD,
bugme-daemon
- Re: Linux 2.6.26-rc4,
J.A. Magallón
- [PATCH] sis5513: add missing pci_enable_device() call,
Bartlomiej Zolnierkiewicz
- [PATCH] block: handle blk_pm_resume_request() requests in blk_execute_rq_nowait(),
Bartlomiej Zolnierkiewicz
- [PATCH] ide: use __generic_unplug_device() in ide_do_drive_cmd() (take 2),
Bartlomiej Zolnierkiewicz
- [Bug 10749] IDE sis5513: the system doesn't shutdown,
bugme-daemon
- Marvell 88SX7042 [4 Port SATA PCI-Express x4] Support/Questions,
Justin Piszcz
- Re: Bug in libata,
Jeff Garzik
- regarding crazy head unloads,
Tejun Heo
- Drives not detected: sil3124 PMP to sil4726 5 drive enclosure,
Ryan Burchfield
- [PATCH #upstream-fixes] libata: SRST can't be trusted on PMP sil3726,
Tejun Heo
- [PATCH] ata: fix sleep-while-holding-spinlock in sata_nv,
Arjan van de Ven
- [PATCH] libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl,
Alan Cox
- [PATCH] Add port multiplier (PMP) support in sata_fsl driver,
Kumar Gala
- [PATCH 0/4] revert the commit 22a9189f (cdrom: use kmalloced buffers instead of buffers on stack),
FUJITA Tomonori
- [PATCH -resend] libata: fix kernel-doc params notation,
Randy.Dunlap
- Re: [Bugme-new] [Bug 10752] New: pata_isapnp driver causes the ata layer to go splat,
Andrew Morton
- [RFC: 2.6 patch] MAINTAINERS: remove SIS 5513 IDE entry,
Adrian Bunk
- [RFC: 2.6 patch] remove BLK_DEV_HD_ONLY,
Adrian Bunk
- Oops with PREEMPT-RT on 2.6.25.4,
Rune Torgersen
- [PATCHSET #upstream] libata: improve timeout handling for EH commands,
Tejun Heo
- SATA disk dies and revives after boot,
Jan Evert van Grootheest
- [PATCH] ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c,
peerchen
- Re: SATA 2.4 ICH8,
Steve Rosenbluth
- [patch 08/18] m68k: macide doesnt check for Mac,
Geert Uytterhoeven
- [PATCH 00/40] ide: generic ATAPI support,
Bartlomiej Zolnierkiewicz
- [PATCH 01/40] ide-scsi: fix race in idescsi_transfer_pc(),
Bartlomiej Zolnierkiewicz
- [PATCH 02/40] ide-scsi: fix DRQ checking for DMA transfers in idescsi_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 03/40] ide-scsi: fix handling of DMA errors in idescsi_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 04/40] ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 05/40] ide-scsi: merge idescsi_input_buffers() and idescsi_output_buffers(),
Bartlomiej Zolnierkiewicz
- [PATCH 06/40] ide-scsi: remove superfluous BUG_ON() from idescsi_transfer_pc(),
Bartlomiej Zolnierkiewicz
- [PATCH 07/40] ide-scsi: add debug_log() macro,
Bartlomiej Zolnierkiewicz
- [PATCH 08/40] ide-tape: idetape_pc_intr() should use local_irq_enable_in_hardirq(),
Bartlomiej Zolnierkiewicz
- [PATCH 09/40] ide-tape: remove superfluous error message from idetape_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 10/40] ide-tape: remove superfluous warning message from idetape_issue_pc(),
Bartlomiej Zolnierkiewicz
- [PATCH 11/40] ide-tape: remove unneeded CONFIG_BLK_DEV_IDEDMA ifdef,
Bartlomiej Zolnierkiewicz
- [PATCH 12/40] ide-tape: remove stale comments from idetape_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 13/40] ide-tape: remove SIMULATE_ERRORS debug code,
Bartlomiej Zolnierkiewicz
- [PATCH 14/40] ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1(),
Bartlomiej Zolnierkiewicz
- [PATCH 15/40] ide-{floppy,tape,scsi}: log device name instead of driver name,
Bartlomiej Zolnierkiewicz
- [PATCH 16/40] ide-tape: make idetape_retry_pc() void,
Bartlomiej Zolnierkiewicz
- [PATCH 17/40] ide-tape: merge callbacks,
Bartlomiej Zolnierkiewicz
- [PATCH 18/40] ide-tape: make pc->idetape_callback void,
Bartlomiej Zolnierkiewicz
- [PATCH 19/40] ide-floppy: merge callbacks,
Bartlomiej Zolnierkiewicz
- [PATCH 20/40] ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callback,
Bartlomiej Zolnierkiewicz
- [PATCH 21/40] ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OK,
Bartlomiej Zolnierkiewicz
- [PATCH 22/40] ide-floppy: start DMA engine in idefloppy_transfer_pc1(),
Bartlomiej Zolnierkiewicz
- [PATCH 23/40] ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc(),
Bartlomiej Zolnierkiewicz
- [PATCH 24/40] ide-tape: factor out waiting for good ireason from idetape_transfer_pc(),
Bartlomiej Zolnierkiewicz
- [PATCH 25/40] ide: add PC_FLAG_ZIP_DRIVE pc flag,
Bartlomiej Zolnierkiewicz
- [PATCH 26/40] ide-{cd,floppy,tape}: remove checking for drive->scsi,
Bartlomiej Zolnierkiewicz
- [PATCH 27/40] ide-scsi: set drive->scsi flag for devices handled by the driver,
Bartlomiej Zolnierkiewicz
- [PATCH 28/40] ide: add ide_transfer_pc() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 29/40] ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc(),
Bartlomiej Zolnierkiewicz
- [PATCH 30/40] ide: add PC_FLAG_DRQ_INTERRUPT pc flag,
Bartlomiej Zolnierkiewicz
- [PATCH 31/40] ide: add ide_issue_pc() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 32/40] ide-{floppy,tape}: move checking of ->failed_pc to ->callback,
Bartlomiej Zolnierkiewicz
- [PATCH 33/40] ide-tape: factor out DSC handling from idetape_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 34/40] ide-tape: add ide_tape_io_buffers() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 35/40] ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled,
Bartlomiej Zolnierkiewicz
- [PATCH 36/40] ide-floppy: add more debugging to idefloppy_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 37/40] ide-scsi: use pc->callback,
Bartlomiej Zolnierkiewicz
- [PATCH 38/40] ide-scsi: add more debugging to idescsi_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 39/40] ide-{floppy,scsi}: read Status Register before stopping DMA engine,
Bartlomiej Zolnierkiewicz
- [PATCH 40/40] ide: add ide_pc_intr() helper,
Bartlomiej Zolnierkiewicz
- Re: [PATCH 00/40] ide: generic ATAPI support,
Borislav Petkov
- [PATCHSET #upstream-fixes] libata: fix a bunch of PMP related problems,
Tejun Heo
- [PATCH 01/10] libata: fix sata_link_hardreset() @online out parameter handling,
Tejun Heo
- [PATCH 02/10] libata: reorganize ata_eh_reset() no reset method path,
Tejun Heo
- [PATCH 03/10] libata: move reset freeze/thaw handling into ata_eh_reset(),
Tejun Heo
- [PATCH 04/10] libata: kill hotplug related race condition,
Tejun Heo
- [PATCH 08/10] libata: don't schedule LPM action seperately during probing,
Tejun Heo
- [PATCH 06/10] libata: increase PMP register access timeout to 3s,
Tejun Heo
- [PATCH 07/10] libata: make sure PMP notification is turned off during recovery,
Tejun Heo
- [PATCH 05/10] libata: ignore recovered PHY errors,
Tejun Heo
- [PATCH 09/10] sata_sil24: don't use NCQ if marvell 4140 PMP is attached,
Tejun Heo
- [PATCH 10/10] libata: ignore SIMG4726 config pseudo device,
Tejun Heo
- Re: [PATCHSET #upstream-fixes] git tree available,
Tejun Heo
- Re: [Bugme-new] [Bug 10738] New: sata_via hang and data corruption,
Andrew Morton
- RE: Unable to access drives via PortMultiplier and SATA/IDE bridge,
Brian & Chamaigne Scamman
- PROBLEM: Error messages on resume from memory/disk.,
Andrei Gusev
- [PATCH 2.6.26-rc2 3/3] sata_promise: other cleanups,
Mikael Pettersson
- [PATCH 2.6.26-rc2 2/3] sata_promise: mmio access cleanups,
Mikael Pettersson
- [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets,
Mikael Pettersson
- Re: Oops: 0000 [#1] SMP //// HPT raid card 1740,
devzero
- HPA Problem in libata-core.c?,
Richard Bland
- [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- Port Multiplier drives not always all found on cold plug,
Mark Lord
- [Bug 10715] New: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc,
bugme-daemon
- 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc,
Pavel Machek
- libata: force hardreset if link is in powersave mode,
Tejun Heo
- [PATCH 0/2] ide: ide_do_drive_cmd cleanups,
FUJITA Tomonori
- [patch 1/1] ata: remove FIT() macro,
akpm
- confusion about libata.force=80c,
Tom Sylla
- [PATCH 01/04] sata_mv always do softreset,
Mark Lord
- Re: Macbook Pro SATA Drives not seen in 2.6.25,
Andrew Morton
- Port-Multiplier hotplug support: ATA_FLAG_AN,
Mark Lord
- [patch 21/37] ata_piix: verify SIDPR access before enabling it,
Greg KH
- SATA hotplug in 2.6.17-2?,
Owen B. Mehegan
- ata_piix 2.6.25 sata failure,
Matthieu CASTET
- [PATCH -stable] ata_piix: verify SIDPR access before enabling it,
Tejun Heo
- [PATCH 03/12] ide: use the common ascii hex helpers,
Harvey Harrison
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
