Linux IDE
[Prev Page][Next Page]
- [PATCH 24/40] ide-tape: factor out waiting for good ireason from idetape_transfer_pc(), (continued)
- [PATCH 24/40] ide-tape: factor out waiting for good ireason from idetape_transfer_pc(),
Bartlomiej Zolnierkiewicz
- [PATCH 25/40] ide: add PC_FLAG_ZIP_DRIVE pc flag,
Bartlomiej Zolnierkiewicz
- [PATCH 26/40] ide-{cd,floppy,tape}: remove checking for drive->scsi,
Bartlomiej Zolnierkiewicz
- [PATCH 27/40] ide-scsi: set drive->scsi flag for devices handled by the driver,
Bartlomiej Zolnierkiewicz
- [PATCH 28/40] ide: add ide_transfer_pc() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 29/40] ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc(),
Bartlomiej Zolnierkiewicz
- [PATCH 30/40] ide: add PC_FLAG_DRQ_INTERRUPT pc flag,
Bartlomiej Zolnierkiewicz
- [PATCH 31/40] ide: add ide_issue_pc() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 32/40] ide-{floppy,tape}: move checking of ->failed_pc to ->callback,
Bartlomiej Zolnierkiewicz
- [PATCH 33/40] ide-tape: factor out DSC handling from idetape_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 34/40] ide-tape: add ide_tape_io_buffers() helper,
Bartlomiej Zolnierkiewicz
- [PATCH 35/40] ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled,
Bartlomiej Zolnierkiewicz
- [PATCH 36/40] ide-floppy: add more debugging to idefloppy_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 37/40] ide-scsi: use pc->callback,
Bartlomiej Zolnierkiewicz
- [PATCH 38/40] ide-scsi: add more debugging to idescsi_pc_intr(),
Bartlomiej Zolnierkiewicz
- [PATCH 39/40] ide-{floppy,scsi}: read Status Register before stopping DMA engine,
Bartlomiej Zolnierkiewicz
- [PATCH 40/40] ide: add ide_pc_intr() helper,
Bartlomiej Zolnierkiewicz
- Re: [PATCH 00/40] ide: generic ATAPI support,
Borislav Petkov
- [PATCHSET #upstream-fixes] libata: fix a bunch of PMP related problems,
Tejun Heo
- [PATCH 01/10] libata: fix sata_link_hardreset() @online out parameter handling,
Tejun Heo
- [PATCH 02/10] libata: reorganize ata_eh_reset() no reset method path,
Tejun Heo
- [PATCH 03/10] libata: move reset freeze/thaw handling into ata_eh_reset(),
Tejun Heo
- [PATCH 04/10] libata: kill hotplug related race condition,
Tejun Heo
- [PATCH 08/10] libata: don't schedule LPM action seperately during probing,
Tejun Heo
- [PATCH 06/10] libata: increase PMP register access timeout to 3s,
Tejun Heo
- [PATCH 07/10] libata: make sure PMP notification is turned off during recovery,
Tejun Heo
- [PATCH 05/10] libata: ignore recovered PHY errors,
Tejun Heo
- [PATCH 09/10] sata_sil24: don't use NCQ if marvell 4140 PMP is attached,
Tejun Heo
- [PATCH 10/10] libata: ignore SIMG4726 config pseudo device,
Tejun Heo
- Re: [PATCHSET #upstream-fixes] git tree available,
Tejun Heo
- Re: [Bugme-new] [Bug 10738] New: sata_via hang and data corruption,
Andrew Morton
- RE: Unable to access drives via PortMultiplier and SATA/IDE bridge,
Brian & Chamaigne Scamman
- PROBLEM: Error messages on resume from memory/disk.,
Andrei Gusev
- [PATCH 2.6.26-rc2 3/3] sata_promise: other cleanups,
Mikael Pettersson
- [PATCH 2.6.26-rc2 2/3] sata_promise: mmio access cleanups,
Mikael Pettersson
- [PATCH 2.6.26-rc2 1/3] sata_promise: fix irq clearing buglets,
Mikael Pettersson
- Re: Oops: 0000 [#1] SMP //// HPT raid card 1740,
devzero
- HPA Problem in libata-core.c?,
Richard Bland
- [Bug 10723] New: linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- [Bug 10723] linux 2.6.24 fails to mount ext3 rootfs on FUJITSU MHK2060AT,
bugme-daemon
- Port Multiplier drives not always all found on cold plug,
Mark Lord
- [Bug 10715] New: 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc,
bugme-daemon
- 2.6.25 -> 2.6.26-rc1: pcmcia flash card changed name from hda to hdc,
Pavel Machek
- libata: force hardreset if link is in powersave mode,
Tejun Heo
- [PATCH 0/2] ide: ide_do_drive_cmd cleanups,
FUJITA Tomonori
- [patch 1/1] ata: remove FIT() macro,
akpm
- confusion about libata.force=80c,
Tom Sylla
- [PATCH 01/04] sata_mv always do softreset,
Mark Lord
- Re: Macbook Pro SATA Drives not seen in 2.6.25,
Andrew Morton
- Port-Multiplier hotplug support: ATA_FLAG_AN,
Mark Lord
- [patch 21/37] ata_piix: verify SIDPR access before enabling it,
Greg KH
- SATA hotplug in 2.6.17-2?,
Owen B. Mehegan
- ata_piix 2.6.25 sata failure,
Matthieu CASTET
- [PATCH -stable] ata_piix: verify SIDPR access before enabling it,
Tejun Heo
- [PATCH 03/12] ide: use the common ascii hex helpers,
Harvey Harrison
- [PATCH 01/12] lib: create common ascii hex array,
Harvey Harrison
- sata_mv on Orion: CONFIG_SATA_PMP=y needed even when no multiplier,
Martin Michlmayr
- sata_mv on Orion: mv_err_intr when shutting down,
Martin Michlmayr
- 2.6.24.*/2.6.25.*: attempt to access beyond end of device,
Peter Klotz
- [PATCH 1/1] [libata] pata-bf54x: Set ATAPI host state machine to control IDE device terminate sequence.,
Bryan Wu
- libata NCQ implementation questions,
Mikael Pettersson
- sata_promise.c:pdc_irq_clear() buglet?,
Mikael Pettersson
- [git patch] libata no-works fix (RESEND),
Jeff Garzik
- Re: libata: improve post-reset device ready test,
Alexey Dobriyan
- How to mount a CD created on Vista?,
James Courtier-Dutton
- [PATCH] ata: ahci: power off unused ports,
Kristen Carlson Accardi
- The never enfind DRDY saga,
J.A. Magallón
- [PATCH 3/5] alim15x3: add "wdc_udma" module parameter,
Bartlomiej Zolnierkiewicz
- [PATCH 5/5] ide/Kconfig: couple of fixes,
Bartlomiej Zolnierkiewicz
- [PATCH 4/5] alim15x3: remove WDC_ALI15X3 config option,
Bartlomiej Zolnierkiewicz
- [PATCH 2/5] alim15x3: remove stale warning about ATI RS100 northbridge,
Bartlomiej Zolnierkiewicz
- [PATCH 1/5] alim15x3: trivial cleanup for ali_set_pio_mode(),
Bartlomiej Zolnierkiewicz
- [PATCH] AHCI: add Dell PowerEdge SC430 pci id,
maximilian attems
- sata_sx4 vs. Promise SX4060,
Lasse Makholm
- [PATCH 4/4] ide: remove drive->ctl,
Bartlomiej Zolnierkiewicz
- [PATCH 3/4] ide: use ->OUTBSYNC in ide_set_irq(),
Bartlomiej Zolnierkiewicz
- [PATCH 2/4] ide: use ->OUTBSYNC in init_irq(),
Bartlomiej Zolnierkiewicz
- [PATCH 1/4] ide: pass 'hwif *' instead of 'drive *' to ->OUTBSYNC method,
Bartlomiej Zolnierkiewicz
- 2.6.26-git: ata_piix link is slow to respond regression.,
Soeren Sonnenburg
- Re: kernel 2.6.25 with ide driver cs5520 does not boot.,
Bartlomiej Zolnierkiewicz
- [PATCH 6/6] ide: remove ->mmio flag from ide_hwif_t,
Bartlomiej Zolnierkiewicz
- [PATCH 4/6] ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flag,
Bartlomiej Zolnierkiewicz
- [PATCH 5/6] ide: move IRQ unmasking out from ->tf_load method,
Bartlomiej Zolnierkiewicz
- [PATCH 3/6] ide: fix do_probe() to use SELECT_DRIVE(),
Bartlomiej Zolnierkiewicz
- [PATCH 2/6] ide: remove commented out code from ide_config_drive_speed(),
Bartlomiej Zolnierkiewicz
- [PATCH 1/6] sgiioc4: use ->extra_base instead of ->dma_status for dma_handle,
Bartlomiej Zolnierkiewicz
- sata silliness on the Vaio,
Andrew Morton
- [patch] LED support for AHCI driver,
Kristen Carlson Accardi
- Compact Flash Question,
Yigal Sadgat
- Update on HAVE_PATA_PLATFORM patches,
Ben Dooks
- AIT Tape/SATA problems,
Russell Brown
- ata-piix booting woes,
Johan van den Berg
- .config changes affecting Intel 82801GBM/GHM ICH7 SATA IDE,
Chris Smith
- [PATCH] SWARM IDE: Fix up following changes to ide_hwif_t,
Maciej W. Rozycki
- 2.6.25 semantic change in bay handling?,
Matthew Garrett
- request for SiS SATA hard disk controller 966 rev. 1183 windows driver,
Guglielmo Fanini
- [PATCH] m68k: Fix falconide `data_adr' typo,
Geert Uytterhoeven
- [2,6 patch] make ide-iops.c:SELECT_MASK() static,
Adrian Bunk
- Initio 162x SATA controllers,
Johan van den Berg
- Re: [PATCH] libata: Add Intel SCH PATA Support,
Sergei Shtylyov
Marvell 88SE6121 PATA in 2.6.25 (ahci),
Mike Hokenson
Switching ICH7 to ACPI mode?,
Florian Echtler
Re: Suspend to memory is freezing my machine,
Robert Hancock
[PATCH] ide: IDE_HFLAG_SERIALIZE_DMA bugfix,
Bartlomiej Zolnierkiewicz
[PATCH] ide: remove try_to_flush_leftover_data(),
Bartlomiej Zolnierkiewicz
Asus DRW-2014L1T SATA DVD drive and sata_via,
Bruce Hill, Jr.
[PATCH 2/3] ide: set REQ_NOMERGE request flag in ide_do_drive_cmd(),
Bartlomiej Zolnierkiewicz
[PATCH 3/3] ide: use __generic_unplug_device() in ide_do_drive_cmd(),
Bartlomiej Zolnierkiewicz
[PATCH 1/3] ide: set REQ_PREEMPT request flag in ide_do_drive_cmd() users,
Bartlomiej Zolnierkiewicz
[PATCH] LBA28/LBA48 off-by-one bug in ata.h,
Taisuke Yamada
[patch 1/1] pata_atiixp: Don't disable,
akpm
[patch 3/3] pata_atiixp: Don't disable,
akpm
[patch 1/3] ata: remove FIT() macro,
akpm
[patch 2/3] pata_atiixp: simplex clear,
akpm
SATA spec rev 2.6 feature NCQ priority support,
Jeremy Jackson
Remove Asus EEE UDMA/33 limitation.,
Dave Jones
[PATCH 00/12] sata_mv: The last big set for 2.6.26,
Mark Lord
Re: dvd writing problem,
Andrew Morton
[PATCH 2/8] ide: use get_unaligned_* helpers,
Harvey Harrison
libata sata_via unusual behaviour,
Paolo
[PATCH #upstream-fixes] libata: improve post-reset device ready test,
Tejun Heo
[PATCH v2 00/13] removing the on-stack struct request,
FUJITA Tomonori
siimage breakage: no MMIO,
Jeremy Kerr
[PATCH #upstream-fixes] ata_piix: verify SIDPR access before enabling it,
Tejun Heo
pata_jmicron: no drives found on post 2.6.25 kernels,
Luca Tettamanti
[PATCH] libata: fix libata-scsi kernel-doc notation,
Randy Dunlap
[PATCH] pata_atiixp: Don't disable,
Alan Cox
[PATCHSET] sata_inic162x: make it work,
Tejun Heo
- [PATCH 01/10] sata_inic162x: misc clean ups,
Tejun Heo
- [PATCH 03/10] sata_inic162x: update TF read handling,
Tejun Heo
- [PATCH 02/10] sata_inic162x: add / update constants,
Tejun Heo
- [PATCH 04/10] sata_inic162x: use IDMA for ATA_PROT_DMA,
Tejun Heo
- [PATCH 06/10] sata_inic162x: use IDMA for non DMA ATA commands,
Tejun Heo
- [PATCH 05/10] sata_inic162x: kill now unused bmdma related stuff,
Tejun Heo
- [PATCH 08/10] sata_inic162x: kill now unused SFF related stuff,
Tejun Heo
- [PATCH 07/10] sata_inic162x: use IDMA for ATAPI commands,
Tejun Heo
- [PATCH 09/10] sata_inic162x: add cardbus support,
Tejun Heo
- [PATCH 10/10] sata_inic162x: update intro comment, up the version and drop EXPERIMENTAL,
Tejun Heo
- Re: [PATCHSET] sata_inic162x: make it work,
Tejun Heo
[PATCH] libata.h: reorganize ata_device a bit,
Jeff Garzik
[PATCH] pata_atiixp fix PIO timing misprogramming,
Jeff Garzik
[PATCH] [IDE] alim15x3: disable init_hwif_ali15x3 for PowerPC,
Anton Vorontsov
[PATCH] libata: PIO bounce copies to avoid long IRQ off runs,
Alan Cox
[PATCH] pata_via: Fix 6410 misdetect,
Alan Cox
[PATCH #upstream-fixes] ahci: SB600 ahci can't do MSI,
Tejun Heo
[PATCH] ide: fix crash at boot with siimage driver,
Benjamin Herrenschmidt
Status of NCQ for the Promise SATA 300 TX2Plus?,
Scott A. Conway
[Bug 10574] New: Hard disk makes bad noise at poweroff when shutting down.,
bugme-daemon
Inconsistent behavior of mount for CDs,
Frans Pop
[git patches] IDE updates part 5,
Bartlomiej Zolnierkiewicz
[PATCH] ide: fix au1xxx-ide breakage,
Bartlomiej Zolnierkiewicz
[PATCH] piix: add Asus Eee 701 controller to short cable list,
Bartlomiej Zolnierkiewicz
[PATCH] ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[],
Bartlomiej Zolnierkiewicz
ata_std_qc_defer not good enough for FIS-based switching ?,
Mark Lord
Mode Sense,
Richard Scobie
ata: Initializer Entries defined twice,
Harvey Harrison
[ATA] Rename routerboard 500 to 532,
Ralf Baechle
[PATCH #upstream-fixes 1/2] libata-scsi: clean up inquiry / mode sense related functions,
Tejun Heo
[git patches] IDE updates part 4,
Bartlomiej Zolnierkiewicz
Re: 2.6.25-mm1 (no disks with sata_nv),
Nish Aravamudan
[git patches] IDE updates part 3,
Bartlomiej Zolnierkiewicz
[PATCH] ide: manage resources for PCI devices in ide_pci_enable() (take 3),
Bartlomiej Zolnierkiewicz
[git patches] IDE updates part 2,
Bartlomiej Zolnierkiewicz
Re: [BUG REPORT, 2.6.22] sata controler failure on nforce 2 chipset,
Andrew Morton
[PATCH] ata: Add Intel SCH PATA support,
Alek Du
sata_mv performance; impact of NCQ,
Jody McIntyre
[PATCH 0/6] add large command support to the block layer,
FUJITA Tomonori
[PATCH] sata_mv Improve naming of main_irq cause/mask identifiers,
Mark Lord
it821x problems continue with 2.6.25,
Marc Zuckman
[PATCH 1/1] [libata/BF54x]: Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared" (v2),
Bryan Wu
[PATCH 0/3] [libata/BF54x]: bug fixing and updates,
Bryan Wu
RE: Add BIOS/OS handoff feature to AHCI,
Zhao, Richard
libata: functions with definition should not be extern,
Harvey Harrison
Regular device resets on esata harddrives,
Gustav
[patch 08/15] m68k: macide doesnt check for Mac,
Geert Uytterhoeven
ahci slow transfer rate with kernel 2.6.23-2.6.25,
kyle
Re: v2.6.25: WARNING: at kernel/lockdep.c:2437 __lock_acquire+0xc69/0xfa0(),
Tejun Heo
Re: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY),
Tejun Heo
[PATCH #upstream-fixes] sata_sis: SCR accessors should return -EINVAL when the requested SCR isn't available,
Tejun Heo
[PATCH] libata-eh copy result_tf flags from outgoing tf,
Mark Lord
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]