U-Boot V2 Development (Barebox)
[Prev Page][Next Page]
- [PATCH 2/4] mxs: Fix i.MX28 PWM3 iomux configuration, (continued)
- imx53 internal boot from NAND,
guenter . gebhardt
- [PATCH] imx53: undefined reference to `imx_get_i2cclk',
guenter . gebhardt
- [PATCH] Add barebox.map and compressed default_env to distclean,
Alexander Shiyan
- [PATCH] i.MX27: Export boot source to magic variables,
Alexander Shiyan
- [PATCH] Select POLLER option for fsl_udc,
Alexander Shiyan
- [PATCH] i.MX27: Added definition for 600 mHz PLL setup.,
Alexander Shiyan
- [PATCH] i.MX27: Added helper for setup chipselect control register,
Alexander Shiyan
- [PATCH 1/6] Rename definitions for ULPI registers,
Alexander Shiyan
- [PATCH] ARM i.MX51 eukrea_cpuimx51: Remove unused include,
Alexander Shiyan
- [PATCH] ARM i.MX51 babbage: Remove clock raise from power_init.,
Alexander Shiyan
- I'm away, Sascha Hauer
- ARM i.MX51: lowlevel code work,
Sascha Hauer
- fix i.MX flash header copy sizes,
Sascha Hauer
- Network Issue with Mini2440,
Kamel BOUHARA
- i.MX21 USB OTG,
Derald D. Woods
- [PATCH 1/2] mtd: core: Fix compilation warning.,
Marek Belisko
- [PATCH V2 0/2] Add support for Karo TX51 module,
Christian Kapeller
- barebox-2012.03.0 imx_get_i2cclk,
guenter . gebhardt
- [PATCH 0/3] miidev: improve phy initialization,
Wolfram Sang
- kconfig-frontends: a packaging of the kconfig language, Yann E. MORIN
- flash_header for mx51,
Alexander Shiyan
- [PATCH] defenv: remove bogus defaultenv from defconfigs, Sascha Hauer
- [PATCH] automount support,
Sascha Hauer
- [PATCH] Add support for Karo TX51 module,
Christian Kapeler
- [PATCH] Remove duplicate voltage setup for imx-esdhc,
Alexander Shiyan
- [PATCH 3/3] i.MX51: Fix NANDF_RDY_INT pin definition,
Alexander Shiyan
- [PATCH 1/3] Use register names for MC13892,
Alexander Shiyan
- [PATCH 2/3] Use mx53-related functions for i.MX53 boards,
Alexander Shiyan
- [PATCH] i.MX27: Use resigter name in imx27_add_fb,
Alexander Shiyan
- [PATCH 1/2] i.MX27: Define SDHC base address,
Alexander Shiyan
- [PATCH 2/2] i.MX27: Add support for SDHC1,
Alexander Shiyan
- [PATCH] i.MX51: Remove GPIO2.6 setup from lowlevel_init,
Alexander Shiyan
- [PATCH 2/2] PCM038: add support for MMC,
Alexander Shiyan
- [PATCH 1/2] i.MX51: add support for UART3,
Alexander Shiyan
- [PATCH 1/5] pcm049: Update RAM timings,
Teresa Gámez
- [PATCH] pcm038: increase size of barebox partition,
Teresa Gámez
- [PATCH 1/2] defaultenv: add bootp support,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] at91: set dhcp vendor id on Atmel Reference board, Jean-Christophe PLAGNIOL-VILLARD
- [RFC] ARM/serial: add a DCC based console driver,
Juergen Beisert
- [PATCH] drivers/mtd: improve docg3 write speed,
Robert Jarzmik
- [PATCH 01/14] macb: fix mmu support,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 09/14] at91sam9261ek/9g10ek: add gpio Keyboard support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 14/14] at91sam9260ek/9g20ek: update defconfig, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 10/14] at91sam9261ek/9g10ek: update board supprt, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 08/14] at91sam9261ek/9g10ek: add dfu and usb serial support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 11/14] at91sam9m10g45ek: update partition layout, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 02/14] at91sam9263ek: add runtime nor detection, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 03/14] at91sam9263ek: add leds support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 04/14] at91sam9263ek: add dfu and usb serial support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 12/14] at91sam9m10g45ek: add leds support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 13/14] at91sam9m10g45ek: update defconfig, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 07/14] at91sam9261ek/9g10ek: add leds support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 05/14] at91sam9263ek: update defconfig, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 06/14] at91sam9261ek/9g10ek: update partition layout, Jean-Christophe PLAGNIOL-VILLARD
- Re: [PATCH 01/14] macb: fix mmu support, Sascha Hauer
- [PATCH 00/14] Atmel ref board update, Jean-Christophe PLAGNIOL-VILLARD
- serial S3: fix local structure malloc,
Juergen Beisert
- [PATCH 00/14] Atmel Reference Board Update,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] ENV: remove kernelimage_type from env/config,
Jan Weitzel
- [PATCH] imx_nand_load_image: change all users to use barebox_image_size,
Michael Grzeschik
- Shall 'bmp' uncompress automagically?,
Wolfram Sang
- [RFC V2 0/6] barebox PCI support,
Antony Pavlov
- [PATCH 1/1] net: dhcp: allow to set transmitted vendor id,
Jean-Christophe PLAGNIOL-VILLARD
- __bss_stop question,
George Stefan
- [PATCH] NET: Add support for ks8851_mll,
Jan Weitzel
- [PATCH] omap: add support for phycard-a-xl2,
Jan Weitzel
- [PATCH] fb: added flush() method to synchronize the used DMA buffer, Enrico Scholz
- [PATCH] bmp: honor alpha channel bits, Enrico Scholz
- [PATCH] fs: flush device on close,
Enrico Scholz
- [PATCH] show_progress: minor optimizations, Enrico Scholz
- [PATCH] net: dhcp: allow to set transmitted vendor id,
Enrico Scholz
- v2012.03.0, Sascha Hauer
- Re: [PATCH/RFC 4/4] memtest: rewrite memtest commands, Sascha Hauer
- Re: [PATCH/RFC 3/4] barebox-data: add barebox-data sections, Sascha Hauer
- [PATCH 1/2 v2] macb: add timeout on send,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] mach-omap: add HAS_DEBUG_LL,
Jan Weitzel
- [PATCH 1/2] omap: move scale_vcores to omap4_generic,
Jan Weitzel
- [PATCH 1/5] net: use net_alloc_packet to allocate packet,
Jean-Christophe PLAGNIOL-VILLARD
- AT91SAM9G45: MACB: not usable Ethernet when MMU is enabled,
RONETIX - Asen Dimov
- [PATCH] pca-a-l1: remove duplicate includes,
Teresa Gámez
- Booting PPC Linux,
Renaud Barbier
- [PATCH 1/3] pm9g45: fix Ethernet,
Asen Chavdarov Dimov
- [PATCH 1/2] pcaam1: Add support for the Phytec phyCARD-A-M1 (PCA-A-M1),
Christian Hemp
- [PATCH V3] arm/mach-pxa: add mioa701 board,
Robert Jarzmik
- [PATCH] drivers/serial: trivial regression fix,
Robert Jarzmik
- [PATCH] Thumb2 support,
Sascha Hauer
- [PATCH] drivers/mci: fix read/write stalling,
Robert Jarzmik
- [PATCH] some binary space reduction,
Sascha Hauer
- [PATCH] lib: remove unused bcopy function, Sascha Hauer
- [PATCH] Add unaligned.h to sandbox arch,
Lars Poeschel
- [PATCH] Typo fix in pm9261 init file,
Asen Chavdarov Dimov
- [PATCH 2/2] getopt: save and restore context, Sascha Hauer
- [PATCH 1/2] getopt: turn commented out printf into debug(), Sascha Hauer
- [PATCH] cp: fix memory leak, Sascha Hauer
- get rid of most type_data usage,
Sascha Hauer
- [PATCH 13/13] driver: remove unused type_data field from struct driver_d, Sascha Hauer
- [PATCH 07/13] serial stm: fix unregister, Sascha Hauer
- [PATCH 12/13] net fec_mpc5200: drop type_data usage, Sascha Hauer
- [PATCH 01/13] fs: get fs driver using container_of, Sascha Hauer
- [PATCH 08/13] serial s3c: add a driver private struct, Sascha Hauer
- [PATCH 03/13] console: use container_of instead of type_data, Sascha Hauer
- [PATCH 09/13] net: use container_of instead of dev->type_data, Sascha Hauer
- [PATCH 05/13] serial pxa: fix unregister, Sascha Hauer
- [PATCH 11/13] net fec_imx: drop type_data usage, Sascha Hauer
- [PATCH 06/13] serial imx: fix unregister, Sascha Hauer
- [PATCH 10/13] net drivers: remove unused type_data, Sascha Hauer
- [PATCH 02/13] fs: get fs device using container_of, Sascha Hauer
- [PATCH 04/13] serial drivers: remove unused type_data, Sascha Hauer
- PATCH: Fix MMC boot in OMAP4 xload configurations,
Mark Olleson
- mx53 loco boot procedure,
George Stefan
- Pending patches,
Robert Jarzmik
- [PATCH 1/7] add i2c clock support,
Eric Bénard
- tftp filesystem support,
Sascha Hauer
- [PULL] gpio_keys, Jean-Christophe PLAGNIOL-VILLARD
- cleanup filesystem core,
Sascha Hauer
- [PATCH 04/12] fs: make locally used function get_mtab_entry_by_path static, Sascha Hauer
- [PATCH 02/12] dos partitions: Do not register as fixed partitions, Sascha Hauer
- [PATCH 01/12] add list_is_singular, Sascha Hauer
- [PATCH 06/12] fs: remove unused function fsdev_get_mountpoint, Sascha Hauer
- [PATCH 08/12] fs: remove only once used variable, Sascha Hauer
- [PATCH 03/12] fs: Store mtab entries in list, Sascha Hauer
- [PATCH 10/12] fs: put fs devices on its own bus, Sascha Hauer
- [PATCH 05/12] fs: Store mtab path in allocated string, Sascha Hauer
- [PATCH 09/12] fs: remove fs devices list, Sascha Hauer
- [PATCH 07/12] fs: simplify get_mtab_entry_by_path, Sascha Hauer
- [PATCH 12/12] devices: unregister children when unregistering a device, Sascha Hauer
- [PATCH 11/12] fs: allow to mount on subdirectories, Sascha Hauer
- Fix FAT block caching,
Sascha Hauer
- USB/network unregistration patches,
Sascha Hauer
- iMX27 clock settings,
Igor Trevisan
- [PATCH 1/4] add gpio keyboard support,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] Add TQ tqma53 support,
Sascha Hauer
- [PATCH v2] omap: xload: Make error more specific,
Sanjeev Premi
- LPC3250 support,
Tomislav Sečen
- [PATCH] uImage/bootm fixes,
Sascha Hauer
- [PATCH] Add support for OMAP4460 revision detection.,
Robert P. J. Day
- [PATCH] Extend OMAP code to recognize PandaBoard ES, Robert P. J. Day
- [RFC] A first pass at recognizing Pandaboards,
Robert P. J. Day
- what is the earliest i can get MLO to print out debugging info?,
Robert P. J. Day
- working on extending board identification right now, Robert P. J. Day
- [PATCH] Add comment explaining what cortex_a9_rev() is doing., Robert P. J. Day
- a question about adding panda ES support before i get rolling,
Robert P. J. Day
- [PATCH] omap: xload: Make error more specific,
Sanjeev Premi
- [RFC] omap3evm: Set preliminary environment,
Sanjeev Premi
- how to read GPIO values from command line?,
Robert P. J. Day
- oh, crap, never mind that last patch, Robert P. J. Day
- [PATCH] more mci related stuff,
Sascha Hauer
- [PATCH] Add support for default env and mounting /boot to BeagleBoard,
Robert P. J. Day
- what config setting causes barebox to automount the boot partition?,
Robert P. J. Day
- [PATCH] mmc/sd patches,
Sascha Hauer
- [PATCH 01/15] mci: Add complete definitions for the card type, Sascha Hauer
- [PATCH 04/15] mci mxs: do not use external define for internal use, Sascha Hauer
- [PATCH 02/15] mci: use card type definitions, Sascha Hauer
- [PATCH 07/15] mci s3c: allocate host struct dynamically, Sascha Hauer
- [PATCH 03/15] mci: fix high capacity detection, Sascha Hauer
- [PATCH 09/15] mci: remove unused device argument from set_ios, Sascha Hauer
- [PATCH 08/15] mci s3c: pass around the right pointer, Sascha Hauer
- [PATCH 06/15] mci s3c: Do not mess with struct mci_host, Sascha Hauer
- [PATCH 15/15] mci: Be more verbose on what device is associated to which disk, Sascha Hauer
- [PATCH 14/15] mci: cdev_find_free_index won't fail, no need to check, Sascha Hauer
- [PATCH 13/15] mci: factor out mci/sd specific startup functions, Sascha Hauer
- [PATCH 05/15] mci core: replace discrete ios values with struct ios, Sascha Hauer
- [PATCH 12/15] mci: replace pr_debug with dev_dbg, Sascha Hauer
- [PATCH 10/15] mci core: fix mixup of max write/read block len, Sascha Hauer
- [PATCH 11/15] mci: Use struct mci for internal argument passing, Sascha Hauer
- my wiki page for barebox on the beagle or panda,
Robert P. J. Day
- any thoughts on CONFIG_MCI_WRITE for beagles and pandas?, Robert P. J. Day
- "panda" config and build doesn't work on panda ES at all,
Robert P. J. Day
- flash image through CAN,
christian . buettner
- should all SD-bootable boards have CONFIG_MCI_WRITE enabled?, Robert P. J. Day
- freescale imx28 barebox supported?,
christian . buettner
- need some clarification on how environments work,
Robert P. J. Day
- [PATCH] Add CONFIG_MCI_STARTUP=y to BeagleBoard defconfig.,
Robert P. J. Day
- [PATCH] Correct Kconfig comment for MCI_OMAP_HSMMC to include OMAP3.,
Robert P. J. Day
- for which OMAP platform is MCI_OMAP_HSMMC appropriate?,
Robert P. J. Day
- why would beagle and panda boards not have CONFIG_MCI_STARTUP set?,
Robert P. J. Day
- An observation with omap_xload,
Premi, Sanjeev
- [RFC] Select CMD_LOADENV with DEFAULT_ENVIRONMENT,
Sanjeev Premi
- [PATCH 0/2] omap3evm: Enable Linux boot,
Sanjeev Premi
- [PATCH] Fix Mac OS cross compile failed.,
Keith Mok
- "make distclean" doesn't remove generated MLO file,
Robert P. J. Day
- [PATCH] Remove apparently superfluous Kconfig variable HAS_OMAP_NAND,
Robert P. J. Day
- what is the purpose of config option HAS_OMAP_NAND?,
Robert P. J. Day
- [PATCH] Add ARCH_OMAP[34] dependencies to Kconfig file, Robert P. J. Day
- [PATCH] DOC: Some grammar and spelling fixes for barebox-main.dox., Robert P. J. Day
- [PATCH] DOC: Grammar and typo fixes in first_steps.dox., Robert P. J. Day
- any value in allowing user selection of barebox prompt?,
Robert P. J. Day
- v2012.02.0, Sascha Hauer
- [PATCH] Typo fix in Kconfig file: "Invlidate" -> "Invalidate", Robert P. J. Day
- how do i add the defn for the beagle xM to barebox?,
Robert P. J. Day
- linking error x86 barebox,
Erwin Rol
- booting kernel from SD card, Belisko Marek
- [PATCH 1/2] omap: Remove OMAP_GPMC prompt and usage.,
Marek Belisko
- IIM on iMX27 "how-to" needed,
Igor
[PATCH] Add pwm core support,
Sascha Hauer
mx35-3stack 124MiByte RAM,
Marc Kleine-Budde
[PATCH] ARM omap pandaboard: update defconfig, Sascha Hauer
Pandaboard kernel 3.2.1 loaded from barebox,
Belisko Marek
Booting linux on a custom iMX27 board,
Igor
[PATCH] drivers/mtd: fix mtdraw write support,
Robert Jarzmik
some debug patches,
Sascha Hauer
i.MX53 QSB,
David Lynch Jr.
Kconfig, David H. Lynch Jr.
[PATCH 0/5] fec_imx & miidev: support for 10 MBit connections,
Wolfram Sang
[PATCH 0/9] MPC8xxx support,
Renaud Barbier
- [PATCH 8/9] Update (ppc) Makefile and Kconfig., Renaud Barbier
- [PATCH 6/9] Add file and compilation of strmhz., Renaud Barbier
- [PATCH 2/9] Define clock source shift and mask., Renaud Barbier
- [PATCH 1/9] Preparation stage to support multiple PPC architectures., Renaud Barbier
- [PATCH 7/9] Add-ons to the PPC library to support the mpc8xxx., Renaud Barbier
- [PATCH 9/9] P1_P2 platform support code and configuratin file for the P2020RDB., Renaud Barbier
- [PATCH 4/9] Header files added to support the mpc8xxx architecture., Renaud Barbier
- [PATCH 5/9] Update to existing header files., Renaud Barbier
- [PATCH 3/9] Added support for the mpc8xxx architecture., Renaud Barbier
- Re: [PATCH 0/9] MPC8xxx support, Sascha Hauer
[PATCH 0/6] update mx35_3ds suppoprt,
Marc Kleine-Budde
[PATCH] ARM pca-a-l1: call omap3_core_init from board code,
Juergen Kilb
[PATCH 1/5] imx-ipu-fb: Add support for multiple video modes,
Teresa Gámez
[PATCH] usb/gadget: fix poller NPE in early polling,
Robert Jarzmik
git pull failed: CONFLICT,
Antony Pavlov
[PATCH 1/1] Revert "mtd omap nand: fix driver without CONFIG_PARAMETER", Jean-Christophe PLAGNIOL-VILLARD
[PATCH v4 0/2] ns16550-related patches,
Antony Pavlov
[Index of Archives]
[Linux Embedded]
[Linux USB Devel]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]