FIXME: execute the "usb" command twice to create the /dev/disk0 device.
Signed-off-by: Asen Chavdarov Dimov <dimov@xxxxxxxxxx>
---
since v1:
- add_device_usbh renamed to pm9g45_add_device_usbh
- skipped manual enabling of clocks
since v2:
- used savedefconfig to minimize the config file
---
arch/arm/boards/pm9g45/init.c | 18 ++++++++++++++++++
arch/arm/configs/pm9g45_defconfig | 11 ++++++++---
2 files changed, 26 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 174dd75..4d3078e 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -92,6 +92,23 @@ static void pm9g45_add_device_mci(void)
static void pm9g45_add_device_mci(void) {}
#endif
+/*
+ * USB OHCI Host port
+ */
+#ifdef CONFIG_USB_OHCI_AT91
+static struct at91_usbh_data __initdata usbh_data = {
+ .ports = 2,
+ .vbus_pin = { AT91_PIN_PD0, 0x0 },
+};
+
+static void __init pm9g45_add_device_usbh(void)
+{
+ at91_add_device_usbh_ohci(&usbh_data);
+}
+#else
+static void __init pm9g45_add_device_usbh(void) {}
+#endif
+
static struct at91_ether_platform_data macb_pdata = {
.flags = AT91SAM_ETHER_RMII,
.phy_addr = 0,
@@ -122,6 +139,7 @@ static int pm9g45_devices_init(void)
pm9g45_add_device_mci();
pm9g45_phy_init();
at91_add_device_eth(&macb_pdata);
+ pm9g45_add_device_usbh();
devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
diff --git a/arch/arm/configs/pm9g45_defconfig b/arch/arm/configs/pm9g45_defconfig
index 8106202..3c9fa69 100644
--- a/arch/arm/configs/pm9g45_defconfig
+++ b/arch/arm/configs/pm9g45_defconfig
@@ -13,26 +13,31 @@ CONFIG_CMD_SAVEENV=y
CONFIG_CMD_EXPORT=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_READLINE=y
-CONFIG_CMD_FLASH=y
CONFIG_CMD_BOOTM_VERBOSE=y
CONFIG_CMD_UIMAGE=y
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
-CONFIG_CMD_I2C=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_RESOLV=y
CONFIG_DRIVER_NET_MACB=y
CONFIG_DRIVER_SPI_ATMEL=y
-CONFIG_I2C=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
CONFIG_MTD=y
CONFIG_NAND=y
CONFIG_NAND_ATMEL=y
CONFIG_UBI=y
+CONFIG_DISK_ATA=y
+CONFIG_USB=y
+CONFIG_USB_OHCI=y
+CONFIG_USB_OHCI_AT91=y
+CONFIG_USB_STORAGE=y
CONFIG_MCI=y
CONFIG_MCI_ATMEL=y
CONFIG_EEPROM_AT25=y
--
1.7.4.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
