Hi Jean-Christophe,
On 03/02/2012 07:18 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
On 18:55 Fri 02 Mar , Asen Chavdarov Dimov wrote:
- change the kernel and rootfs locations
- correct the NAND mtd partitions
- fix the DDR RAM location(so BareBox load address)
- expect the root file system type to be UBIFS
Signed-off-by: Asen Chavdarov Dimov<dimov@xxxxxxxxxx>
---
since v1:
this patch I gorgot to send, so it pops-up now
---
arch/arm/boards/pm9g45/env/config | 8 +-
arch/arm/configs/pm9g45_defconfig | 339 +++++++++++++++++++++++++++++++++---
please use savedefconfig to generate the defconfig
done.
2 files changed, 314 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boards/pm9g45/env/config b/arch/arm/boards/pm9g45/env/config
index 3dea724..1858292 100644
--- a/arch/arm/boards/pm9g45/env/config
+++ b/arch/arm/boards/pm9g45/env/config
@@ -11,9 +11,9 @@ ip=dhcp
#eth0.serverip=a.b.c.d
# can be either 'nfs', 'tftp' or 'nand'
-kernel_loc=tftp
+kernel_loc=nand
# can be either 'net', 'nand' or 'initrd'
-rootfs_loc=net
+rootfs_loc=nand
# can be either 'jffs2' or 'ubifs'
rootfs_type=ubifs
@@ -25,8 +25,8 @@ kernelimage=uImage
#kernelimage=Image.lzo
nand_device=atmel_nand
-nand_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
-rootfs_mtdblock_nand=3
+nand_parts="128k(bootstrap)ro,256k(barebox)ro,1664k(bareboxenv),3M(kernel.bb),-(root)"
use kerenel not kernel.bb
In the "defaultenv/bin/boot" it is mentioned "/dev/nand0.kernel.bb" and
many boards are using
".bb" suffix.
why env the 1664k?
To align the kernel to start at 2MiB offset.
Best Regards,
J.
Regards,
Asen
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
