On Tue, 7 Feb 2012, Premi, Sanjeev wrote: > > -----Original Message----- > > From: Robert P. J. Day [mailto:rpjday@xxxxxxxxxxxxxx] > > Sent: Tuesday, February 07, 2012 10:33 PM > > To: Premi, Sanjeev > > Cc: U-Boot Version 2 (barebox) > > Subject: RE: "make distclean" doesn't remove generated MLO file > > > > On Tue, 7 Feb 2012, Premi, Sanjeev wrote: > > > > > I usually compile both stages together with a 'make clean' in > > > between, hence decided to preserve MLO. Makes it easy to copy both > > > MLO and barebox.bin at same time. > > > > is there any sort of requirement about cleaning in between those two > > steps? if there is, that's a potential "gotcha" that should be > > clearly documented. > > No "gotcha" that I know of - but just a habit! i figured as much. but under the circumstances, i think removing MLO should be part of CLEAN_FILES given its obvious relationship to things like barebox.bin. philosophically, it just makes more sense. and on that note, i will now shut up about it. rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ======================================================================== _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
