U-Boot V2 Development (Barebox)

• Date Index

• Re: command: hashsum: md5sum reports wrong sum for the file named 4k.bin, (continued)
  • Re: command: hashsum: md5sum reports wrong sum for the file named 4k.bin, Peter Mamonov
    • Re: command: hashsum: md5sum reports wrong sum for the file named 4k.bin, Sascha Hauer
      • [PATCH] lib: parse_area_spec: don't modify *start and *size values if parse failed, Peter Mamonov
        • Re: [PATCH] lib: parse_area_spec: don't modify *start and *size values if parse failed, Sascha Hauer
          • Re: [PATCH] lib: parse_area_spec: don't modify *start and *size values if parse failed, Peter Mamonov
          • [PATCH v2 1/3] lib: parse_area_spec: don't modify *start value if parse failed, Peter Mamonov
            • [PATCH v2 3/3] lib: parse_area_spec: no extra symbols after area spec are allowed except for spaces, Peter Mamonov
            • [PATCH v2 2/3] lib: parse_area_spec: part of the area spec after -/+ should start with a digit, Peter Mamonov
            • Re: [PATCH v2 1/3] lib: parse_area_spec: don't modify *start value if parse failed, Sascha Hauer
              • Re: [PATCH v2 1/3] lib: parse_area_spec: don't modify *start value if parse failed, Peter Mamonov
• [PATCH 1/2] common: state: Add property to protect existing data, Daniel Schultz
  • [PATCH 2/2] ARM: dts: AM335x: Add keep-previous-content property, Daniel Schultz
  • Re: [PATCH 1/2] common: state: Add property to protect existing data, Daniel Schultz
  • Re: [PATCH 1/2] common: state: Add property to protect existing data, Sascha Hauer
• [PATCH] ARM: boards: phytec-som-am335x: Fallback ram timings, Daniel Schultz
  • Re: [PATCH] ARM: boards: phytec-som-am335x: Fallback ram timings, Sascha Hauer
    • Re: [PATCH] ARM: boards: phytec-som-am335x: Fallback ram timings, Daniel Schultz
• [PATCH] net: phy: scan PHYs referenced by phandle, Lucas Stach
  • Re: [PATCH] net: phy: scan PHYs referenced by phandle, Sascha Hauer
• [PATCH] Bootm: remove uimage_close done later in bootm_boot, Clément Leger
  • Re: [PATCH] Bootm: remove uimage_close done later in bootm_boot, Sascha Hauer
• [PATCH] bootchooser: Fix initcall before environment is ready, Gavin Schenk
  • Re: [PATCH] bootchooser: Fix initcall before environment is ready, Schenk, Gavin
• [PATCH] spi: imx: make xchg_single timeout value compatible for older boards, Alexander Kurz
  • Re: [PATCH] spi: imx: make xchg_single timeout value compatible for older boards, Sascha Hauer
• v2017.12.0, Sascha Hauer
• [PATCH v2 0/5] add support for DPTechnics DPT-Module v1, Oleksij Rempel
  • [PATCH v2 1/5] MIPS: provide HAS_NO_BOARD_HL_CODE, Oleksij Rempel
  • [PATCH v2 2/5] MIPS: ar9331: add watchdog support, Oleksij Rempel
  • [PATCH v2 4/5] MIPS: ath79: ar9331: add ar9331_pbl_generic_start macro, Oleksij Rempel
  • [PATCH v2 3/5] MIPS: ath79: ar9331: add generic RAM macro, Oleksij Rempel
  • [PATCH v2 5/5] MIPS: add support for DPTechnics DPT-Module v1, Oleksij Rempel
  • Re: [PATCH v2 0/5] add support for DPTechnics DPT-Module v1, Sascha Hauer
• [PATCH] Documentation: state: mention SD/eMMC devices, Sascha Hauer
  • Re: [PATCH] Documentation: state: mention SD/eMMC devices, Sascha Hauer
• barebox on RaspberryPi2 and Pi3, Jens Maus
  • Re: barebox on RaspberryPi2 and Pi3, Sascha Hauer
• [PATCH v1 1/4] MIPS: ar9331: add watchdog support, Oleksij Rempel
  • [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1, Oleksij Rempel
    • Re: [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1, Antony Pavlov
      • Re: [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1, Oleksij Rempel
        • Re: [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1, Sascha Hauer
          • Re: [PATCH v1 4/4] MIPS: add support for DPTechnics DPT-Module v1, Oleksij Rempel
  • [PATCH v1 2/4] MIPS: ath79: ar9331: add generic RAM macro, Oleksij Rempel
  • [PATCH v1 3/4] MIPS: ath79: ar9331: add ar9331_pbl_generic_start macro, Oleksij Rempel
• [PATCH] net: dhcp: make tftp work again, Oleksij Rempel
  • Re: [PATCH] net: dhcp: make tftp work again, Sascha Hauer
• [PATCH] ARM: dts: bcm2835-rpi: re-enable booting from SD card, Roland Hieber
  • Re: [PATCH] ARM: dts: bcm2835-rpi: re-enable booting from SD card, Lucas Stach
  • Re: [PATCH] ARM: dts: bcm2835-rpi: re-enable booting from SD card, Alexander Dahl
  • Re: [PATCH] ARM: dts: bcm2835-rpi: re-enable booting from SD card, Sascha Hauer
• bootchooser and state (again), David GARRIOU
  • Re: bootchooser and state (again), Sascha Hauer
• [PATCH 0/4] A bit more consistent interface for "miitool", Andrey Smirnov
  • [PATCH 2/4] fs: Introduce devpath_to_name(), Andrey Smirnov
  • [PATCH 3/4] i.MX: imu-bbu-internal: Make use of devpath_to_name(), Andrey Smirnov
  • [PATCH 4/4] commands/miitool: Allow specifying PHY by their full path, Andrey Smirnov
  • [PATCH 1/4] commands: miitool: Constify 'phydevname' in mdiobus_show(), Andrey Smirnov
  • Re: [PATCH 0/4] A bit more consistent interface for "miitool", Sascha Hauer
• [PATCH v2 0/6] MDIO bus multiplexer support, Andrey Smirnov
  • [PATCH v2 2/6] mdio_bus: Port of_mdio_find_bus() from Linux kernel, Andrey Smirnov
  • [PATCH v2 1/6] ARM: vybrid: zii: Make use of DT code from Linux kernel, Andrey Smirnov
  • [PATCH v2 3/6] net: phy: Port MDIO bus miltiplexer framework from Linux kernel, Andrey Smirnov
  • [PATCH v2 5/6] net: mdio-mux: Avoid probing multiplexed busses, Andrey Smirnov
  • [PATCH v2 4/6] net: phy: Port GPIO controlled MDIO multiplexer driver, Andrey Smirnov
  • [PATCH v2 6/6] zii_vf610_dev_defconfig: Select MDIO bus GPIO multiplexer, Andrey Smirnov
  • Re: [PATCH v2 0/6] MDIO bus multiplexer support, Sascha Hauer
• [PATCH v1 1/4] MIPS: ath79: ar9331: add generic RAM macro, Oleksij Rempel
  • [PATCH v1 3/4] MIPS: add support for DPTechnics DPT-Module v1, Oleksij Rempel
  • [PATCH v1 4/4] MIPS: ar9331: add watchdog support, Oleksij Rempel
  • [PATCH v1 2/4] MIPS: add generic QCA AR9331 board, Oleksij Rempel
    • Re: [PATCH v1 2/4] MIPS: add generic QCA AR9331 board, Sascha Hauer
      • Re: [PATCH v1 2/4] MIPS: add generic QCA AR9331 board, Oleksij Rempel
• [PATCH v2] Networking updates, Sascha Hauer
  • [PATCH 04/27] net: use pr_* functions for messages, Sascha Hauer
  • [PATCH 19/27] ifup: Use dhcp C API rather than running command, Sascha Hauer
  • [PATCH 02/27] driver: Add device_detect_all() function, Sascha Hauer
  • [PATCH 13/27] net: dhcp: avoid unnecessary casts, Sascha Hauer
  • [PATCH 03/27] nvvar: when setting a nvvar to NULL just free the content, Sascha Hauer
  • [PATCH 05/27] net: Add and use IP_BROADCAST, Sascha Hauer
  • [PATCH 08/27] net: introduce global.net.server, Sascha Hauer
  • [PATCH 27/27] defaultenv-2: set bootargs correctly for network boot, Sascha Hauer
  • [PATCH 11/27] net: allow udp connections on specified network device, Sascha Hauer
  • [PATCH 09/27] net: dhcp: Do not overwrite serverip if it is valid, Sascha Hauer
  • [PATCH 21/27] net: update network docs, Sascha Hauer
  • [PATCH 15/27] net: dhcp: rework, Sascha Hauer
    • Re: [PATCH 15/27] net: dhcp: rework, Oleksij Rempel
  • [PATCH 07/27] net: Add functions to get/set nameserver and domainname, Sascha Hauer
  • [PATCH 06/27] net: Make domainname and nameserver globalvars, Sascha Hauer
  • [PATCH 01/27] detect command: Drop -e option, Sascha Hauer
  • [PATCH 20/27] net: Provide new way to configure network devices, Sascha Hauer
  • [PATCH 12/27] net: dhcp: Allow to specify network device, Sascha Hauer
  • [PATCH 23/27] net: environment: update automounts, Sascha Hauer
  • [PATCH 16/27] net: Pick network device based on IP settings, Sascha Hauer
  • [PATCH 10/27] net: Use a single gateway, Sascha Hauer
  • [PATCH 17/27] net: remove "current" network device, Sascha Hauer
  • [PATCH 25/27] net: Add linuxdevname property, Sascha Hauer
  • [PATCH 18/27] net: ifup: Factor out a eth_discover function, Sascha Hauer
  • [PATCH 22/27] net: environment: remove ethx setup files, Sascha Hauer
  • [PATCH 26/27] commands: Add ip_route_add command, Sascha Hauer
  • [PATCH 24/27] defaultenv: Add README for new network config, Sascha Hauer
  • [PATCH 14/27] net: dhcp: Coding style fixes, Sascha Hauer
• [PATCH] net/e1000: indicate at boot time if flash is in secure mode, Uwe Kleine-König
  • Re: [PATCH] net/e1000: indicate at boot time if flash is in secure mode, Sascha Hauer
• Fix Documentation build warnings, Sascha Hauer
  • [PATCH 2/7] Documentation: Change many code blocks to no highlight, Sascha Hauer
  • [PATCH 5/7] Documentation: defaultenv-2: Change highlight to make, Sascha Hauer
  • [PATCH 7/7] ARM: psci command: Add to misc group, Sascha Hauer
  • [PATCH 3/7] Documentation: socfpga: Fix numbered list, Sascha Hauer
  • [PATCH 1/7] Documentation: arm-qemu-vexpress: Fix too short underline, Sascha Hauer
  • [PATCH 4/7] Documentation: change default highlight language to shell, Sascha Hauer
  • [PATCH 6/7] Documentation: remove :numbered: from lower level toctrees, Sascha Hauer
• Support for QEMU virt ARM 32, Andre Wagner
  • Re: Support for QEMU virt ARM 32, Lucas Stach
    • Re: Support for QEMU virt ARM 32, Andre Wagner
      • Re: Support for QEMU virt ARM 32, Lucas Stach
• [PATCH] common: globalvar: fix removing multiple nvvars with wildcards, Sascha Hauer
• [PATCH] of: base: use root_node compatible as suggestion for a hostname, Oleksij Rempel
  • Re: [PATCH] of: base: use root_node compatible as suggestion for a hostname, Sascha Hauer
• [PATCH 1/5] ARM: vybrid: zii: Make use of DT code from Linux kernel, Andrey Smirnov
  • [PATCH 2/5] mdio_bus: Port of_mdio_find_bus() from Linux kernel, Andrey Smirnov
  • [PATCH 3/5] net: phy: Port MDIO bus miltiplexer framework from Linux kernel, Andrey Smirnov
    • Re: [PATCH 3/5] net: phy: Port MDIO bus miltiplexer framework from Linux kernel, Sascha Hauer
      • Re: [PATCH 3/5] net: phy: Port MDIO bus miltiplexer framework from Linux kernel, Andrey Smirnov
  • [PATCH 4/5] net: phy: Port GPIO controlled MDIO multiplexer driver, Andrey Smirnov
  • [PATCH 5/5] net: mdio-mux: Avoid probing multiplexed busses, Andrey Smirnov
• [PATCH] net/e1000: add missing \n in error message, Uwe Kleine-König
  • Re: [PATCH] net/e1000: add missing \n in error message, Sascha Hauer
• [PATCH] net/e1000: implement protect and unprotect for attached flash, Uwe Kleine-König
  • Re: [PATCH] net/e1000: implement protect and unprotect for attached flash, Sascha Hauer
• ASIX USB dongle problem: asix_rx_fixup() Bad Header Length, Holger Birkmeyer
  • Re: ASIX USB dongle problem: asix_rx_fixup() Bad Header Length, Sascha Hauer
    • Re: ASIX USB dongle problem: asix_rx_fixup() Bad Header Length, Holger Birkmeyer
      • Re: ASIX USB dongle problem: asix_rx_fixup() Bad Header Length, Sascha Hauer
        • Re: ASIX USB dongle problem: asix_rx_fixup() Bad Header Length, Holger Birkmeyer
• [PATCH] ARM: i.MX: bbu-internal: fix typos, Ulrich Ölmann
  • Re: [PATCH] ARM: i.MX: bbu-internal: fix typos, Sascha Hauer
• [PATCH] ARM: i.MX: bbu-internal: fix comment, Ulrich Ölmann
  • Re: [PATCH] ARM: i.MX: bbu-internal: fix comment, Sascha Hauer
• [PATCH] mtd: spi-nor: mx25l3205d/mx25l6405d: append SECT_4K, Ulrich Ölmann
  • Re: [PATCH] mtd: spi-nor: mx25l3205d/mx25l6405d: append SECT_4K, Sascha Hauer
• [PATCH] Documentation: devicetree: m25p80: fix referenced filename, Ulrich Ölmann
  • Re: [PATCH] Documentation: devicetree: m25p80: fix referenced filename, Sascha Hauer
• Networking updates, Sascha Hauer
  • [PATCH 02/21] nvvar: when setting a nvvar to NULL just free the content, Sascha Hauer
  • [PATCH 18/21] net: update network docs, Sascha Hauer
  • [PATCH 15/21] net: ifup: Factor out a eth_discover function, Sascha Hauer
  • [PATCH 19/21] net: environment: remove ethx setup files, Sascha Hauer
  • [PATCH 04/21] net: Add functions to get/set nameserver and domainname, Sascha Hauer
    • Re: [PATCH 04/21] net: Add functions to get/set nameserver and domainname, Sam Ravnborg
      • Re: [PATCH 04/21] net: Add functions to get/set nameserver and domainname, Sascha Hauer
  • [PATCH 01/21] driver: Add device_detect_all() function, Sascha Hauer
    • Re: [PATCH 01/21] driver: Add device_detect_all() function, Sam Ravnborg
      • Re: [PATCH 01/21] driver: Add device_detect_all() function, Sascha Hauer
        • Re: [PATCH 01/21] driver: Add device_detect_all() function, Sam Ravnborg
  • [PATCH 21/21] defaultenv: Add README for new network config, Sascha Hauer
  • [PATCH 13/21] net: Pick network device based on IP settings, Sascha Hauer
  • [PATCH 06/21] net: dhcp: Do not overwrite serverip if it is valid, Sascha Hauer
    • Re: [PATCH 06/21] net: dhcp: Do not overwrite serverip if it is valid, Sam Ravnborg
      • Re: [PATCH 06/21] net: dhcp: Do not overwrite serverip if it is valid, Sascha Hauer
  • [PATCH 07/21] net: Use a single gateway, Sascha Hauer
  • [PATCH 11/21] net: dhcp: Coding style fixes, Sascha Hauer
  • [PATCH 03/21] net: Make domainname and nameserver globalvars, Sascha Hauer
  • [PATCH 10/21] net: dhcp: avoid unnecessary casts, Sascha Hauer
  • [PATCH 05/21] net: introduce global.net.server, Sascha Hauer
  • [PATCH 09/21] net: dhcp: Allow to specify network device, Sascha Hauer
    • Re: [PATCH 09/21] net: dhcp: Allow to specify network device, Sam Ravnborg
      • Re: [PATCH 09/21] net: dhcp: Allow to specify network device, Sascha Hauer
  • [PATCH 17/21] net: Provide new way to configure network devices, Sascha Hauer
  • [PATCH 08/21] net: allow udp connections on specified network device, Sascha Hauer
    • Re: [PATCH 08/21] net: allow udp connections on specified network device, Sam Ravnborg
      • Re: [PATCH 08/21] net: allow udp connections on specified network device, Sascha Hauer
  • [PATCH 20/21] net: environment: update automounts, Sascha Hauer
  • [PATCH 14/21] net: remove "current" network device, Sascha Hauer
  • [PATCH 16/21] ifup: Use dhcp C API rather than running command, Sascha Hauer
  • [PATCH 12/21] net: dhcp: rework, Sascha Hauer
    • Re: [PATCH 12/21] net: dhcp: rework, Sam Ravnborg
      • Re: [PATCH 12/21] net: dhcp: rework, Sascha Hauer
• FW: Handling boot on NAND Bad Blocks, Kjell Ove Røte
  • Re: FW: Handling boot on NAND Bad Blocks, Robert Schwebel
    • RE: FW: Handling boot on NAND Bad Blocks, Kjell Ove Røte
      • Re: FW: Handling boot on NAND Bad Blocks, Robert Schwebel
        • RE: FW: Handling boot on NAND Bad Blocks, Kjell Ove Røte
• [PATCH] globalvar: When a globalvar is created with a NULL value, use empty string, Sascha Hauer
• [PATCH] nv: add device parameter overwrites to completion list, Sascha Hauer
• [PATCH v2 0/3] provide watchdog support on ar9344 SoC, Oleksij Rempel
  • [PATCH v2 2/3] MIPS: dts: ar9344: add watchdog node, Oleksij Rempel
  • [PATCH v2 1/3] watchdog: add ar9344-wdt driver, Oleksij Rempel
    • Re: [PATCH v2 1/3] watchdog: add ar9344-wdt driver, Sam Ravnborg
  • [PATCH v2 3/3] MIPS: dts: tl_wdr4300: enable watchdog node, Oleksij Rempel
  • Re: [PATCH v2 0/3] provide watchdog support on ar9344 SoC, Sascha Hauer
• [PATCH 0/6] net/e1000: more cleanups and ways to access i210 storage, Uwe Kleine-König
  • [PATCH 4/6] net/e1000: provide access to iNVM even if a flash is present, Uwe Kleine-König
  • [PATCH 1/6] net/e1000: fix coding style at a few locations, Uwe Kleine-König
  • [PATCH 6/6] net/e1000: provide device for accessing emulated eeprom, Uwe Kleine-König
  • [PATCH 3/6] net/e1000: reorder functions, Uwe Kleine-König
  • [PATCH 2/6] net/e1000: don't use the eeprom word size as timeout to get a semaphore, Uwe Kleine-König
  • [PATCH 5/6] net/e1000: fix size of invm device, Uwe Kleine-König
  • [PATCH 7/6] net/e1000: don't fail to bind on uninitialized flash, Uwe Kleine-König
    • [PATCH 8/6] net/e1000: log flash/invm status at probe time, Uwe Kleine-König
    • [PATCH 9/6] net/e1000: don't access the (simulated) eeprom when it is invalid, Uwe Kleine-König
    • [PATCH 11/6] net/e1000: expand timeout for flash erasure, Uwe Kleine-König
    • [PATCH 10/6] net/e1000: indicate in error messages where the failure occured, Uwe Kleine-König
  • Re: [PATCH 0/6] net/e1000: more cleanups and ways to access i210 storage, Sascha Hauer
• [PATCH] ARM: rdu2: build a single image for both Quad and QuadPlus variants, Lucas Stach
  • Re: [PATCH] ARM: rdu2: build a single image for both Quad and QuadPlus variants, Sascha Hauer
• [PATCH v1 1/3] watchdog: add ar9344-wdt driver, Oleksij Rempel
  • [PATCH v1 3/3] MIPS: dts: tl_wdr4300: enable watchdog node, Oleksij Rempel
  • [PATCH v1 2/3] MIPS: dts: ar9344: add watchdog node, Oleksij Rempel
  • Re: [PATCH v1 1/3] watchdog: add ar9344-wdt driver, Sam Ravnborg
    • Re: [PATCH v1 1/3] watchdog: add ar9344-wdt driver, Oleksij Rempel
• [PATCH] Add linux.devname property to eth device, Gavin Schenk
  • Re: [PATCH] Add linux.devname property to eth device, Uwe Kleine-König
  • Re: [PATCH] Add linux.devname property to eth device, Sascha Hauer
• [PATCH] usbgadget: fastboot: select FILE_LIST, Lucas Stach
  • Re: [PATCH] usbgadget: fastboot: select FILE_LIST, Sascha Hauer
• [PATCH v2] imx-bbu-nand-fcb: fix build on MX28 only, Lucas Stach
  • Re: [PATCH v2] imx-bbu-nand-fcb: fix build on MX28 only, Sascha Hauer
• [PATCH] ARM: imx: santaro: select i2c, Lucas Stach
  • Re: [PATCH] ARM: imx: santaro: select i2c, Sascha Hauer
• [PATCH] ARM: boards: phytec-som-am335x: Fix SPI boot script, Daniel Schultz
  • Re: [PATCH] ARM: boards: phytec-som-am335x: Fix SPI boot script, Sascha Hauer
• [PATCH] readline_simple: use len instead of CONFIG_CBSIZE, Gaël PORTAY
  • Re: [PATCH] readline_simple: use len instead of CONFIG_CBSIZE, Sascha Hauer
    • Re: [PATCH] readline_simple: use len instead of CONFIG_CBSIZE, Gaël PORTAY
• [PATCH] clk: sp810: hardwire parent to 1MHz clock, Lucas Stach
  • Re: [PATCH] clk: sp810: hardwire parent to 1MHz clock, Sascha Hauer
• [PATCH] boards/zii-vf610-dev: Do not keep 'SOC_SW_RSTN' low, Andrey Smirnov
  • Re: [PATCH] boards/zii-vf610-dev: Do not keep 'SOC_SW_RSTN' low, Sascha Hauer
• [PATCH] fs: Fix can_lseek_backward(), Andrey Smirnov
  • Re: [PATCH] fs: Fix can_lseek_backward(), Michael Grzeschik
  • Re: [PATCH] fs: Fix can_lseek_backward(), Sascha Hauer
• [PATCH] Net: add mdio_i2c driver., Clément Leger
  • Re: [PATCH] Net: add mdio_i2c driver., Sascha Hauer
    • Re: [PATCH] Net: add mdio_i2c driver., Clément Leger
      • Re: [PATCH] Net: add mdio_i2c driver., Sascha Hauer
        • Re: [PATCH] Net: add mdio_i2c driver., Clément Leger
          • Re: [PATCH] Net: add mdio_i2c driver., Sascha Hauer
            • Re: [PATCH] Net: add mdio_i2c driver., Clément Leger
• [PATCH v1] usbgadget command: provide -m option to set usb mode, Oleksij Rempel
  • Re: [PATCH v1] usbgadget command: provide -m option to set usb mode, Sascha Hauer
• v2017.11.0, Sascha Hauer
• [PATCH v1] i.MX: esdhc: wait until SDSTB is asserted, not other way arround, Oleksij Rempel
  • Re: [PATCH v1] i.MX: esdhc: wait until SDSTB is asserted, not other way arround, Sascha Hauer
• support mt7620, jianhuizhao329@xxxxxxxxx
  • Re: support mt7620, Oleksij Rempel
  • Re: support mt7620, Antony Pavlov
• [PATCH v2] uimage: fix: add can_lseek_backward and use in uimage_open, Michael Grzeschik
  • Re: [PATCH v2] uimage: fix: add can_lseek_backward and use in uimage_open, Sascha Hauer
• [PATCH v1] i.MX: esdhc: optimize set_ios path, Oleksij Rempel
  • Re: [PATCH v1] i.MX: esdhc: optimize set_ios path, Sascha Hauer
    • Re: [PATCH v1] i.MX: esdhc: optimize set_ios path, Oleksij Rempel
      • Re: [PATCH v1] i.MX: esdhc: optimize set_ios path, Sascha Hauer
• [PATCH] Configure network device for nfsboot via nv var, Gavin Schenk
  • Re: [PATCH] Configure network device for nfsboot via nv var, Sascha Hauer
    • AW: [PATCH] Configure network device for nfsboot via nv var, Schenk, Gavin
      • Re: [PATCH] Configure network device for nfsboot via nv var, Uwe Kleine-König
      • Re: [PATCH] Configure network device for nfsboot via nv var, s.hauer@xxxxxxxxxxxxxx
• [PATCH v3 1/7] ARM: boards: phytec-som-am335x: Add unified MLO, Daniel Schultz
  • [PATCH v3 2/7] ARM: dts: AM335x: Add state framework, Daniel Schultz
  • [PATCH v3 6/7] common: state: Add function to read state MAC, Daniel Schultz
  • [PATCH v3 3/7] ARM: configs: am335x_defconfig: Add state config, Daniel Schultz
  • [PATCH v3 5/7] common: state: Add variable type as enum, Daniel Schultz
  • [PATCH v3 7/7] ARM: phytec-som-am335x: Set MAC addresses from state, Daniel Schultz
  • [PATCH v3 4/7] common: state: Add variable_type to state_variable, Daniel Schultz
  • Re: [PATCH v3 1/7] ARM: boards: phytec-som-am335x: Add unified MLO, Sascha Hauer
• [PATCH v3 1/3] ARM: dts: AM335x: Add dummy i2c nodes, Daniel Schultz
  • [PATCH v3 3/3] ARM: phytec-som-am335x: Add autoenable, Daniel Schultz
  • [PATCH v3 2/3] common: oftree: Add autoenable functionality, Daniel Schultz
  • Re: [PATCH v3 1/3] ARM: dts: AM335x: Add dummy i2c nodes, Sascha Hauer
• [PATCH v2 1/3] ARM: dts: AM335x: Add dummy i2c nodes, Daniel Schultz
  • [PATCH v2 3/3] ARM: phytec-som-am335x: Add autoenable, Daniel Schultz
  • [PATCH v2 2/3] common: oftree: Add autoenable functionality, Daniel Schultz
    • Re: [PATCH v2 2/3] common: oftree: Add autoenable functionality, Sascha Hauer
• [PATCH v2 1/6] ARM: boards: phytec-som-am335x: Add unified MLO, Daniel Schultz
  • [PATCH v2 3/6] ARM: configs: am335x_defconfig: Add state config, Daniel Schultz
  • [PATCH v2 5/6] common: state: Add function to read state MAC, Daniel Schultz
    • Re: [PATCH v2 5/6] common: state: Add function to read state MAC, Sascha Hauer
  • [PATCH v2 4/6] common: state: Add variable_type to state_variable, Daniel Schultz
    • Re: [PATCH v2 4/6] common: state: Add variable_type to state_variable, Sascha Hauer
  • [PATCH v2 2/6] ARM: dts: AM335x: Add state framework, Daniel Schultz
  • [PATCH v2 6/6] ARM: phytec-som-am335x: Set MAC addresses from state, Daniel Schultz
• [PATCH] 2d-primitives: fix typos in function names in comments, Nikita Yushchenko
  • Re: [PATCH] 2d-primitives: fix typos in function names in comments, Sascha Hauer
• [PATCH] uimage: fix: broken uimage_open on tftp since forward lseek works, Michael Grzeschik
  • Re: [PATCH] uimage: fix: broken uimage_open on tftp since forward lseek works, Sascha Hauer
• [PATCH v3 0/6] Fixes for nv command handling, Enrico Jorns
  • [PATCH 5/6] commands: nv: adjust command help, Enrico Jorns
  • [PATCH 2/6] commands: nv: call nvvar_print() only if no argument is given, Enrico Jorns
  • [PATCH 3/6] commands: nv: assure error code will be returned when an error occurred, Enrico Jorns
  • [PATCH 6/6] command: nv: rewrap help text lines, Enrico Jorns
  • [PATCH 4/6] common: globvar: let nvvar_remove() report non-existing variable, Enrico Jorns
  • [PATCH 1/6] commands: nv: fail with verbose message if invoked without args, Enrico Jorns
  • Re: [PATCH v3 0/6] Fixes for nv command handling, Sascha Hauer
• [PATCH v2 0/5] Fixes for nv command handling, Enrico Jorns
  • [PATCH 1/5] commands: nv: fail with verbose message if invoked without args, Enrico Jorns
    • Re: [PATCH 1/5] commands: nv: fail with verbose message if invoked without args, Stefan Lengfeld
      • Re: [PATCH 1/5] commands: nv: fail with verbose message if invoked without args, Enrico Jörns
        • Re: [PATCH 1/5] commands: nv: fail with verbose message if invoked without args, Stefan Lengfeld
  • [PATCH 2/5] commands: nv: call nvvar_print() only if no argument is given, Enrico Jorns
  • [PATCH 4/5] common: globvar: let nvvar_remove() report non-existing variable, Enrico Jorns
  • [PATCH 5/5] commands: nv: adjust command help, Enrico Jorns
    • Re: [PATCH 5/5] commands: nv: adjust command help, Sam Ravnborg
      • Re: [PATCH 5/5] commands: nv: adjust command help, Enrico Jörns
  • [PATCH 3/5] commands: nv: assure error code will be returned when an error occurred, Enrico Jorns
• [PATCH 1/5] ARM: boards: phytec-som-am335x: Add unified MLO, Daniel Schultz
  • [PATCH 3/5] ARM: configs: am335x_defconfig: Add state config, Daniel Schultz
  • [PATCH 5/5] ARM: phytec-som-am335x: Set MAC addresses from state, Daniel Schultz
  • [PATCH 2/5] ARM: dts: AM335x: Add state framework, Daniel Schultz
  • [PATCH 4/5] common: state: Make find_var public, Daniel Schultz
    • Re: [PATCH 4/5] common: state: Make find_var public, Sascha Hauer
• [PATCH 1/3] common: Add autoenable for components, Daniel Schultz
  • [PATCH 3/3] ARM: phytec-som-am335x: Add autoenable, Daniel Schultz
  • [PATCH 2/3] ARM: dts: AM335x: Add dummy i2c nodes, Daniel Schultz
  • Re: [PATCH 1/3] common: Add autoenable for components, Sascha Hauer
• [PATCH 1/2] efi-gui: add USB IO Protocol GUID definition, Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/2] efi-block: detect when the block device is a USB Disk, Jean-Christophe PLAGNIOL-VILLARD
    • Re: [PATCH 2/2] efi-block: detect when the block device is a USB Disk, Michael Olbrich
      • Re: [PATCH 2/2] efi-block: detect when the block device is a USB Disk, Sascha Hauer
  • Re: [PATCH 1/2] efi-gui: add USB IO Protocol GUID definition, Sascha Hauer
• [PATCH] EFI: add poweroff support, Jean-Christophe PLAGNIOL-VILLARD
  • Re: [PATCH] EFI: add poweroff support, Sascha Hauer
  • Re: [PATCH] EFI: add poweroff support, Antony Pavlov
• [PATCH] usb: imx: implement support for "over-current-active-high" property, Uwe Kleine-König
  • Re: [PATCH] usb: imx: implement support for "over-current-active-high" property, Sascha Hauer
• [PATCH 1/1] EFI: add poweroff support, Jean-Christophe PLAGNIOL-VILLARD
  • Re: [PATCH 1/1] EFI: add poweroff support, Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 0/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Uwe Kleine-König
  • [PATCH v2 1/3] ARM: i.MX: bbu-internal: make filename for device to write to adaptable, Uwe Kleine-König
  • [PATCH v2 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Uwe Kleine-König
  • [PATCH v2 3/3] ARM: i.MX: bbu-internal: update tqma6x to make use of new bbu handler, Uwe Kleine-König
  • Re: [PATCH v2 0/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Sascha Hauer
• [PATCH] arm: bootm: don't fall over if image is padded with less than 40 bytes, Lucas Stach
  • Re: [PATCH] arm: bootm: don't fall over if image is padded with less than 40 bytes, Sascha Hauer
• [PATCH] graphic_utils: Fix freeing uninitialzed pointer in fb_open(), Sascha Hauer
• Terasic DE0 Nano SoC / SoCkit confusion, Ian Abbott
  • Re: Terasic DE0 Nano SoC / SoCkit confusion, Steffen Trumtrar
    • Re: Terasic DE0 Nano SoC / SoCkit confusion, Ian Abbott
• [PATCH 1/3] ARM: i.MX: bbu-internal: make filename for device to write to adaptable, Uwe Kleine-König
  • [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler, Uwe Kleine-König
    • Re: [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler, Sascha Hauer
      • Re: [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler, Uwe Kleine-König
        • Re: [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler, Sascha Hauer
  • [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Uwe Kleine-König
    • Re: [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Sascha Hauer
      • Re: [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Uwe Kleine-König
• intel efi system too slow, Giorgio Dal Molin
  • Re: intel efi system too slow, Sascha Hauer
• [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi", Ulrich Ölmann
  • [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted, Ulrich Ölmann
    • Re: [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted, Uwe Kleine-König
      • Re: [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted, Ulrich Ölmann
  • [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted, Ulrich Ölmann
  • <Possible follow-ups>
  • [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi", Ulrich Ölmann
    • [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted, Ulrich Ölmann
    • [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted, Ulrich Ölmann
    • Re: [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi", Ulrich Ölmann
    • Re: [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi", Sascha Hauer
• [PATCH] OMAP_GPMC: this driver depends on MTD, Juergen Borleis
  • Re: [PATCH] OMAP_GPMC: this driver depends on MTD, Sascha Hauer
• [PATCH] UBI: attach: add missing newline at end of pr_err(), Marc Kleine-Budde
  • Re: [PATCH] UBI: attach: add missing newline at end of pr_err(), Sascha Hauer
• [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line(), Nikita Yushchenko
  • [PATCH 3/3] fbtest: add gradients pattern, Nikita Yushchenko
    • Re: [PATCH 3/3] fbtest: add gradients pattern, Sam Ravnborg
      • Re: [PATCH 3/3] fbtest: add gradients pattern, Sascha Hauer
  • [PATCH 2/3] fbtest: add solid pattern, Nikita Yushchenko
  • Re: [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line(), Chris Healy
• [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL, Philipp Zabel
  • Re: [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL, Sascha Hauer
• [PATCH v2 01/12] ARM: vexpress: always build relocatable image, Lucas Stach
  • [PATCH v2 04/12] clocksource: sp804: silently ignore secondary instaces, Lucas Stach
  • [PATCH v2 05/12] mci: mmci: add DT support, Lucas Stach
  • [PATCH v2 09/12] vexpress: use device tree provided by QEMU if available, Lucas Stach
  • [PATCH v2 02/12] of: populate clock providers before other devices, Lucas Stach
  • [PATCH v2 10/12] vexpress: add bootstate node to the device tree, Lucas Stach
  • [PATCH v2 12/12] ARM: vexpress: add fixup handler for 'virtio, mmio' devices, Lucas Stach
  • [PATCH v2 08/12] docs: add qemu vexpress, Lucas Stach
  • [PATCH v2 07/12] ARM: vexpress: regenerate config, Lucas Stach
  • [PATCH v2 03/12] clk: versatile: add basic clocks, Lucas Stach
  • [PATCH v2 11/12] of: base: add function to copy a device tree node, Lucas Stach
  • [PATCH v2 06/12] ARM: vexpress: switch to DT probe and multi-image build, Lucas Stach
  • Re: [PATCH v2 01/12] ARM: vexpress: always build relocatable image, Sascha Hauer
• [PATCH] efi: add missing Kconfig selects, Enrico Jorns
  • Re: [PATCH] efi: add missing Kconfig selects, Sascha Hauer
• [PATCH] Marvell: implement marvell_of_reg_init, Clément Leger
  • Re: [PATCH] Marvell: implement marvell_of_reg_init, Sascha Hauer
• [PATCH 0/5] sandbox: add gpio support with libftdi1, Antony Pavlov
  • [PATCH 1/5] sandbox: avoid symbol conflict for {open,read,close}dir, Antony Pavlov
  • [PATCH 3/5] sandbox: parse libftdi options, Antony Pavlov
    • Re: [PATCH 3/5] sandbox: parse libftdi options, Sascha Hauer
      • Re: [PATCH 3/5] sandbox: parse libftdi options, Antony Pavlov
        • Re: [PATCH 3/5] sandbox: parse libftdi options, Sascha Hauer
          • Re: [PATCH 3/5] sandbox: parse libftdi options, Antony Pavlov
            • Re: [PATCH 3/5] sandbox: parse libftdi options, Sascha Hauer
  • [PATCH 2/5] sandbox: add gpio support with libftdi1, Antony Pavlov
    • Re: [PATCH 2/5] sandbox: add gpio support with libftdi1, Sascha Hauer
  • [PATCH 5/5] sandbox: dts: add i2c and spi libftdi1 bit-bang example, Antony Pavlov
  • [PATCH 4/5] sandbox_defconfig: enable gpio, spi, i2c and led stuff, Antony Pavlov
• [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning, Antony Pavlov
  • Re: [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning, Sascha Hauer
• [PATCH v2 0/3] e1000: fix access to companion flash chip, Uwe Kleine-König
  • [PATCH v2 3/3] e1000: Don't poll for FLSWCTL.GLDONE before starting a flash transaction, Uwe Kleine-König
  • [PATCH v2 2/3] e1000: implement support for smaller flash chips, Uwe Kleine-König
  • [PATCH v2 1/3] e1000: implement register mapping for E1000_FLSW{CTL, DATA, CNT}, Uwe Kleine-König
  • Re: [PATCH v2 0/3] e1000: fix access to companion flash chip, Sascha Hauer
• [PATCH] elf.h: Use EI_NIDENT instead of numeric value, Antony Pavlov
  • Re: [PATCH] elf.h: Use EI_NIDENT instead of numeric value, Sascha Hauer
• [PATCH 0/3] e1000: access to flash on i210, Uwe Kleine-König
  • [PATCH 2/3] e1000: implement support for smaller flash chips, Uwe Kleine-König
    • Re: [PATCH 2/3] e1000: implement support for smaller flash chips, Andrey Smirnov
  • [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle, Uwe Kleine-König
    • Re: [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle, Uwe Kleine-König
      • Re: [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle, Andrey Smirnov
        • Re: [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle, Uwe Kleine-König
  • [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}}, Uwe Kleine-König
    • Re: [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}}, Andrey Smirnov
      • Re: [PATCH 1/3] e1000: implement register mapping for E1000_{EERD,FLSW{CTL,DATA,CNT}}, Uwe Kleine-König
• again [PATCH v1 2/2] command ccrypt, Gerd Pauli
• [PATCH v1 1/2] ccryptlib: library for encrypting/decrypting, Gerd Pauli
• [PATCH v1 2/2] command ccrypt, Gerd Pauli
• [PATCH] regmap: port regmap_update_bits from linux, Steffen Trumtrar
  • Re: [PATCH] regmap: port regmap_update_bits from linux, Sascha Hauer
• [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes, Steffen Trumtrar
  • Re: [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes, Sascha Hauer
• [PATCH v1] writef: added command to write content of variable to file, Gerd Pauli
  • Re: [PATCH v1] writef: added command to write content of variable to file, Sascha Hauer
• v2017.10.0, Sascha Hauer
• Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Marcel Hamer
  • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Sascha Hauer
    • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Marcel Hamer
      • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Ian Abbott
        • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Marcel Hamer
          • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, gianluca
            • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Marcel Hamer
• [PATCH v1] MIPS: tplink-wdr4300_defconfig: enable RATP, Oleksij Rempel
• [PATCH v1 1/2] clk: add ar9344 clock driver, Oleksij Rempel
  • [PATCH v1 2/2] MIPS: dts: ar9344: add pll node, Oleksij Rempel
  • Re: [PATCH v1 1/2] clk: add ar9344 clock driver, Sascha Hauer
• [PATCH] net: ag71xx: define parent devices, Oleksij Rempel
  • Re: [PATCH] net: ag71xx: define parent devices, Sascha Hauer
• how to persistently save config values, Giorgio Dal Molin
  • Re: how to persistently save config values, Oleksij Rempel
  • Re: how to persistently save config values, B Gol
    • Re: how to persistently save config values, Giorgio Dal Molin
  • Re: how to persistently save config values, Sascha Hauer
    • Re: how to persistently save config values, Giorgio Dal Molin
      • Re: how to persistently save config values, Sascha Hauer
• [RFC v4 00/10] add initial RISC-V architecture support, Antony Pavlov
  • [RFC v4 02/10] RISC-V: add Erizo SoC support, Antony Pavlov
    • Re: [RFC v4 02/10] RISC-V: add Erizo SoC support, Oleksij Rempel
      • Re: [RFC v4 02/10] RISC-V: add Erizo SoC support, Antony Pavlov
  • [RFC v4 03/10] RISC-V: add low-level debug macros for ns16550, Antony Pavlov
  • [RFC v4 06/10] RISC-V: erizo: enable NMON, Antony Pavlov
  • [RFC v4 04/10] RISC-V: add nmon nano-monitor, Antony Pavlov
    • Re: [RFC v4 04/10] RISC-V: add nmon nano-monitor, Oleksij Rempel
      • Re: [RFC v4 04/10] RISC-V: add nmon nano-monitor, Antony Pavlov
  • [RFC v4 05/10] RISC-V: erizo: add DEBUG_LL support, Antony Pavlov
  • [RFC v4 08/10] RISC-V: add erizo_generic_defconfig, Antony Pavlov
    • Re: [RFC v4 08/10] RISC-V: add erizo_generic_defconfig, Oleksij Rempel
      • Re: [RFC v4 08/10] RISC-V: add erizo_generic_defconfig, Antony Pavlov
  • [RFC v4 07/10] RISC-V: erizo: add nmon image creation, Antony Pavlov
  • [RFC v4 09/10] scripts: add nmon-loader, Antony Pavlov
  • [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
    • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Oleksij Rempel
      • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
        • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Oleksij Rempel
          • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
        • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Daniel Schultz
          • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
      • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Daniel Schultz
        • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
          • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Daniel Schultz
            • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
  • [RFC v4 10/10] Documentation: add RISC-V docs, Antony Pavlov
    • Re: [RFC v4 10/10] Documentation: add RISC-V docs, Oleksij Rempel
      • Re: [RFC v4 10/10] Documentation: add RISC-V docs, Antony Pavlov
• [PATCH v2] Add i.MX6ull EVK Support, Sascha Hauer
  • [PATCH 1/2] ARM: i.MX6ul: Add SoC specific lowlevel_init function, Sascha Hauer
  • [PATCH 2/2] ARM: Add i.MX6ull evk support, Sascha Hauer
• [PATCH v2 0/3] state: add support for pre-mainline state format, Uwe Kleine-König
  • [PATCH v2 2/3] state: new backend format "rawcompat", Uwe Kleine-König
  • [PATCH v2 3/3] state: storage: direct: skip writing meta data if this makes data fit, Uwe Kleine-König
  • [PATCH v2 1/3] Documentation: state: adapt description to reality, Uwe Kleine-König
    • Re: [PATCH v2 1/3] Documentation: state: adapt description to reality, Sascha Hauer
• barebox fb console on an EFI system, Giorgio Dal Molin
• [PATCH 1/2] ARM: i.MX6ull: Add SoC specific lowlevel_init function, Sascha Hauer
  • [PATCH 2/2] i.MX6ull evk support, Sascha Hauer
    • Re: [PATCH 2/2] i.MX6ull evk support, Lucas Stach
      • Re: [PATCH 2/2] i.MX6ull evk support, Sascha Hauer
        • Re: [PATCH 2/2] i.MX6ull evk support, Lucas Stach
          • Re: [PATCH 2/2] i.MX6ull evk support, Sascha Hauer
            • Re: [PATCH 2/2] i.MX6ull evk support, Philipp Zabel
  • Re: [PATCH 1/2] ARM: i.MX6ull: Add SoC specific lowlevel_init function, Lucas Stach
• usbgadget: fastboot: Allow to automatically export bbu handlers, Sascha Hauer
  • [PATCH 12/12] usbgadget autostart: add usbgadget.fastboot_bbu to automatically export bbu handlers, Sascha Hauer
  • [PATCH 03/12] file_list: Allow only unique names on list, Sascha Hauer
  • [PATCH 06/12] file_list: Add error messages, Sascha Hauer
  • [PATCH 08/12] bbu: Add function to iterate over registered handlers, Sascha Hauer
  • [PATCH 11/12] fastboot command: Add -b option to export bbu handlers, Sascha Hauer
  • [PATCH 09/12] usbgadget command: catch errors when parsing the file list, Sascha Hauer
  • [PATCH 01/12] file_list: Add function to add an entry to the list, Sascha Hauer
  • [PATCH 07/12] usbgadget: fastboot: Use function to find file_list entry by name, Sascha Hauer
  • [PATCH 04/12] file_list: Fix memory leak in failure path, Sascha Hauer
  • [PATCH 10/12] usbgadget: fastboot: Allow to automatically export the bbu handlers, Sascha Hauer
  • [PATCH 05/12] file_list: Add GPL header to file, Sascha Hauer
  • [PATCH 02/12] file_list: Add function to get entry by its name, Sascha Hauer
• usbgadget fix some crashes, Sascha Hauer
  • [PATCH 3/4] usbgadget: only set to peripheral mode when error checking is done, Sascha Hauer
    • Re: [PATCH 3/4] usbgadget: only set to peripheral mode when error checking is done, Oleksij Rempel
  • [PATCH 1/4] usbgadget: autostart: Handle errors in file list gracefully, Sascha Hauer
    • Re: [PATCH 1/4] usbgadget: autostart: Handle errors in file list gracefully, Oleksij Rempel
  • [PATCH 4/4] usbgadget: unregister when usb_composite_probe() fails, Sascha Hauer
    • Re: [PATCH 4/4] usbgadget: unregister when usb_composite_probe() fails, Oleksij Rempel
  • [PATCH 2/4] usbgadget: do not register when no functions present, Sascha Hauer
    • Re: [PATCH 2/4] usbgadget: do not register when no functions present, Oleksij Rempel
• barebox on an intel efi system, Giorgio Dal Molin
  • Re: barebox on an intel efi system, Oleksij Rempel
    • Re: barebox on an intel efi system, Giorgio Dal Molin
• [PATCH 0/3] gpiolib: introduce gpio initializer, Uwe Kleine-König
  • [PATCH 3/3] gpiolib: introduce gpio initializer, Uwe Kleine-König
  • [PATCH 1/3] gpiolib: reorder functions, Uwe Kleine-König
  • [PATCH 2/3] gpiolib: introduce helper functions working on gpio_info structs, Uwe Kleine-König
  • Re: [PATCH 0/3] gpiolib: introduce gpio initializer, Sascha Hauer
    • Re: [PATCH 0/3] gpiolib: introduce gpio initializer, Uwe Kleine-König
• [PATCH 0/2] state: add support for pre-mainline state format, Uwe Kleine-König
  • [PATCH 2/2] state: storage: direct: skip writing meta data if this makes data fit, Uwe Kleine-König
  • [PATCH 1/2] state: new backend format "rawcompat", Uwe Kleine-König
• [PATCH 1/2] scripts: imx imx-usb-loader: Add support for i.MX6ull, Sascha Hauer
  • [PATCH 2/2] scripts: imx imx-usb-loader: Fix last transfer error message, Sascha Hauer
• [PATCH] remove checks for xzalloc() returning NULL, Uwe Kleine-König
  • Re: [PATCH] remove checks for xzalloc() returning NULL, Sascha Hauer
• [PATCH] pinctrl: mxs: fix error message to mention right property name, Uwe Kleine-König
  • Re: [PATCH] pinctrl: mxs: fix error message to mention right property name, Sascha Hauer
• [PATCH] imx-bbu-nand-fcb: read_firmware_all(): Spell "Secondary firmware" with a capital "S", Marc Kleine-Budde
  • Re: [PATCH] imx-bbu-nand-fcb: read_firmware_all(): Spell "Secondary firmware" with a capital "S", Sascha Hauer
• [PATCH] ARM: i.MX53 QSB: drop phy reset handling in board file, Uwe Kleine-König
  • Re: [PATCH] ARM: i.MX53 QSB: drop phy reset handling in board file, Sascha Hauer
• [PATCH v2] gpiolib: check validity for gpio_info in *_active(), Uwe Kleine-König
  • Re: [PATCH v2] gpiolib: check validity for gpio_info in *_active(), Sascha Hauer
• [PATCH] gpiolib: check validity for gpio_info in *_active(), Uwe Kleine-König
  • Re: [PATCH] gpiolib: check validity for gpio_info in *_active(), Sascha Hauer
• [PATCH] console_countdown: ignore errors in getchar(), Aleksander Morgado
  • Re: [PATCH] console_countdown: ignore errors in getchar(), Sascha Hauer
• [PATCH v1 1/3] net: ag71xx: define parent devices, Oleksij Rempel
  • [PATCH v1 3/3] MIPS: ath79: provide driver for Atheros ART partition, Oleksij Rempel
  • [PATCH v1 2/3] MIPS: dts: tl_wdr4300: add Atheros ART partition, Oleksij Rempel
    • Re: [PATCH v1 2/3] MIPS: dts: tl_wdr4300: add Atheros ART partition, Sascha Hauer
      • Re: [PATCH v1 2/3] MIPS: dts: tl_wdr4300: add Atheros ART partition, Oleksij Rempel
• [PATCH] mmc: allow skipping SD card initialization, Philipp Zabel
  • Re: [PATCH] mmc: allow skipping SD card initialization, Sascha Hauer
• [PATCH] lib,ratp: avoid too verbose info messages, Aleksander Morgado
  • Re: [PATCH] lib,ratp: avoid too verbose info messages, Sascha Hauer
• [PATCH] bootm: bootm_open_initrd_uimage(): propagate error if initrd verification fails, Marc Kleine-Budde
  • Re: [PATCH] bootm: bootm_open_initrd_uimage(): propagate error if initrd verification fails, Sascha Hauer
• bootm_open_initrd_uimage: result of uimage_verify() is ignored, Marc Kleine-Budde
  • Re: bootm_open_initrd_uimage: result of uimage_verify() is ignored, Sascha Hauer
• [PATCH v1] net: ag71xx: disable eth interface on barebox shutdown, Oleksij Rempel
  • Re: [PATCH v1] net: ag71xx: disable eth interface on barebox shutdown, Sascha Hauer
• [PATCH] memtest: fix list iteration in region setup, Steffen Trumtrar
  • Re: [PATCH] memtest: fix list iteration in region setup, Sascha Hauer
• [PATCH 1/2] ARM: imx: santaro: select i2c, Lucas Stach
  • [PATCH 2/2] imx-bbu-nand-fcb: fix build on MX28 only, Lucas Stach
    • Re: [PATCH 2/2] imx-bbu-nand-fcb: fix build on MX28 only, Sam Ravnborg
      • Re: [PATCH 2/2] imx-bbu-nand-fcb: fix build on MX28 only, Sascha Hauer
• [PATCH 00/12] Vexpress rework, Lucas Stach
  • [PATCH 02/12] of: populate clock providers before other devices, Lucas Stach
  • [PATCH 01/12] ARM: vexpress: always build relocatable image, Lucas Stach
  • [PATCH 06/12] ARM: vexpress: switch to DT probe and multi-image build, Lucas Stach
  • [PATCH 04/12] clocksource: sp804: silently ignore secondary instaces, Lucas Stach
  • [PATCH 09/12] vexpress: use device tree provided by QEMU if available, Lucas Stach
  • [PATCH 12/12] ARM: vexpress: add fixup handler for 'virtio, mmio' devices, Lucas Stach
  • [PATCH 05/12] mci: mmci: add DT support, Lucas Stach
    • Re: [PATCH 05/12] mci: mmci: add DT support, Sam Ravnborg
  • [PATCH 07/12] ARM: vexpress: regenerate config, Lucas Stach
  • [PATCH 11/12] of: base: add funtion to copy a device tree node, Lucas Stach
    • Re: [PATCH 11/12] of: base: add funtion to copy a device tree node, Sascha Hauer
  • [PATCH 03/12] clk: versatile: add basic clocks, Lucas Stach
    • Re: [PATCH 03/12] clk: versatile: add basic clocks, Sam Ravnborg
  • [PATCH 10/12] vexpress: add bootstate node to the device tree, Lucas Stach
  • [PATCH 08/12] docs: add qemu vexpress, Lucas Stach
• Load environment variables earlier, zjh
  • Re: Load environment variables earlier, Oleksij Rempel
  • Re: Load environment variables earlier, Sascha Hauer
• [PATCH v1 3/3] yubikey authentication in login, ykpasswd command to manage the database, gp
• [PATCH v1 2/2] command: ccrypt Crypt and Decrypt Files uses keystore for passwords compatible with https://sourceforge.net/projects/ccrypt/ keystore_init Simple Keystore initializer, gp
  • Re: [PATCH v1 2/2] command: ccrypt Crypt and Decrypt Files uses keystore for passwords compatible with https://sourceforge.net/projects/ccrypt/ keystore_init Simple Keystore initializer, Sascha Hauer
• [PATCH v1 1/2] commands: writef write variable contents to file, gp
  • Re: [PATCH v1 1/2] commands: writef write variable contents to file, Oleksij Rempel
• move to github, zjh
  • Re: move to github, Alexander Shiyan
    • Re: move to github, zjh
  • Re: move to github, Sascha Hauer
    • Re: move to github, Jean-Christophe PLAGNIOL-VILLARD
    • Message not available
      • Re: move to github, Sascha Hauer
• [PATCH v3 00/10] provide ethernet support for ar9344 and ar9331, Oleksij Rempel
  • [PATCH v3 01/10] net: ath79: add ag71xx Ethernet driver, Oleksij Rempel
  • [PATCH v3 03/10] MIPS: dts: ar9344: add mac0 node, Oleksij Rempel
  • [PATCH v3 02/10] add ar9331.dtsi and enable mac0, Oleksij Rempel
  • [PATCH v3 05/10] MIPS: dts: tl_wdr4300: add alias for spiflash, Oleksij Rempel
  • [PATCH v3 07/10] add phy: ar8327 driver, Oleksij Rempel
  • [PATCH v3 04/10] MIPS: dts: tl_wdr4300: enable mac0, Oleksij Rempel
  • [PATCH v3 08/10] MIPS: dts: tl_wdr4300: rename it to tl_wdr4300 v1.7, Oleksij Rempel
  • [PATCH v3 06/10] MIPS: dts: tl_wdr4300: remove RO flag from barebox partition, Oleksij Rempel
  • [PATCH v3 10/10] MIPS: dts: ar9344: add APB bus, Oleksij Rempel
  • [PATCH v3 09/10] MIPS: tplink-wdr4300_defconfig: add network support, Oleksij Rempel
  • Re: [PATCH v3 00/10] provide ethernet support for ar9344 and ar9331, Sascha Hauer
    • Re: [PATCH v3 00/10] provide ethernet support for ar9344 and ar9331, Antony Pavlov
      • Re: [PATCH v3 00/10] provide ethernet support for ar9344 and ar9331, Sascha Hauer
• yubikey and aes support for barebox, Gerd Pauli
  • Re: yubikey and aes support for barebox, Oleksij Rempel
• [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331, Oleksij Rempel
  • [PATCH v2 10/10] MIPS: dts: ar9344: add APB bus, Oleksij Rempel
  • [PATCH v2 03/10] MIPS: dts: ar9344: add mac0 node, Oleksij Rempel
  • [PATCH v2 02/10] add ar9331.dtsi and enable mac0, Oleksij Rempel
  • [PATCH v2 09/10] MIPS: tplink-wdr4300_defconfig: add network support, Oleksij Rempel
  • [PATCH v2 04/10] MIPS: dts: tl_wdr4300: enable mac0, Oleksij Rempel
  • [PATCH v2 08/10] MIPS: dts: tl_wdr4300: rename it to tl_wdr4300 v1.7, Oleksij Rempel
  • [PATCH v2 05/10] MIPS: dts: tl_wdr4300: add alias for spiflash, Oleksij Rempel
  • [PATCH v2 06/10] MIPS: dts: tl_wdr4300: remove RO flag from barebox partition, Oleksij Rempel
  • [PATCH v2 07/10] add phy: ar8327 driver, Oleksij Rempel
  • [PATCH v2 01/10] net: ath79: add ag71xx Ethernet driver, Oleksij Rempel
    • Re: [PATCH v2 01/10] net: ath79: add ag71xx Ethernet driver, Sascha Hauer
• [PATCH 0/5] Fixes for nv command handling, Enrico Jorns
  • [PATCH 1/5] commands: nv: argc cannot be < 1, Enrico Jorns
    • Re: [PATCH 1/5] commands: nv: argc cannot be < 1, Sascha Hauer
      • Re: [PATCH 1/5] commands: nv: argc cannot be < 1, Enrico Joerns
  • [PATCH 2/5] commands: nv: call nvvar_print() only if no argument is given, Enrico Jorns
  • [PATCH 3/5] commands: nv: assure error code will be returned when an error occurred, Enrico Jorns
  • [PATCH 5/5] common: globvar: let nvvar_remove() report non-existing variable, Enrico Jorns
  • [PATCH 4/5] commands: nv: fail if required var arguments are missing, Enrico Jorns
  • [PATCH] commands: nv: adjust command help, Enrico Jorns
• PBL using xz, zjh
• boot problem w/ barebox, Enrico Weigelt, metux IT consult
  • Re: boot problem w/ barebox, Uwe Kleine-König
    • Re: boot problem w/ barebox, Enrico Weigelt, metux IT consult
      • Re: [ptxdist] boot problem w/ barebox, Uwe Kleine-König
• v2017.09.0, Sascha Hauer
• [PATCH v2 0/2] gpio: gpio-generic: add dt support, Antony Pavlov
  • [PATCH v2 1/2] gpio: gpio-generic: fix bgpio_map(), Antony Pavlov
  • [PATCH v2 2/2] gpio: gpio-generic: add dt support, Antony Pavlov
  • Re: [PATCH v2 0/2] gpio: gpio-generic: add dt support, Sascha Hauer
• [PATCH 0/4] privide ns16550 support for AR9344, Oleksij Rempel
  • [PATCH 4/4] serial: ns16550: provide big-endian support, Oleksij Rempel
  • [PATCH 3/4] x86: asm: include asm-generic.h, Oleksij Rempel
  • [PATCH 2/4] asm-generic: partially sync io.h with linux kernel, Oleksij Rempel
  • [PATCH 1/4] of: base: port of_device_is_big_endian from linux, Oleksij Rempel
  • Re: [PATCH 0/4] privide ns16550 support for AR9344, Robert Schwebel
  • Re: [PATCH 0/4] privide ns16550 support for AR9344, Sascha Hauer
• [PATCH] efi: add iBASE MI991AF documentation., Oleksij Rempel
  • Re: [PATCH] efi: add iBASE MI991AF documentation., Sascha Hauer
• [PATCH] efi: make sure efi-fs is started in the right order, Oleksij Rempel
  • Re: [PATCH] efi: make sure efi-fs is started in the right order, Sascha Hauer
• [PATCH] Documentation: efi: add example how to create EFI partition, Oleksij Rempel
  • Re: [PATCH] Documentation: efi: add example how to create EFI partition, Sascha Hauer
• [PATCH 1/2] mtd: nand: Only call ONFI get/set features on supported chips, Sascha Hauer
  • [PATCH 2/2] mtd: nand: nand_mxs: Don't call get/set features on chips which do not support it, Sascha Hauer
• [PATCH] Phy: Check NULL bus case and undetected phy via of, Clément Leger
  • Re: [PATCH] Phy: Check NULL bus case and undetected phy via of, Sascha Hauer
• Fix tftpd-hpa support, Sascha Hauer
  • [PATCH 1/2] fs: avoid pathes with '//' in __canonicalize_path(), Sascha Hauer
  • [PATCH 2/2] fs: Don't bother filesystems without link support with additional stat() calls, Sascha Hauer
• [PATCH 0/2] gpio: gpio-generic: add dt support, Antony Pavlov
  • [PATCH 2/2] gpio: gpio-generic: add dt support, Antony Pavlov
  • [PATCH 1/2] gpio: gpio-generic: fix bgpio_map(), Antony Pavlov
    • Re: [PATCH 1/2] gpio: gpio-generic: fix bgpio_map(), Sascha Hauer