On Sat, Feb 17, 2018 at 10:18:16AM +0100, Andreas Schmidt wrote: > Hi Sascha, > > > On 16.02.2018 08:39, Sascha Hauer wrote: > > No need to call mdiobus_scan() manually. it is called from > > phy_device_connect() already in cpsw_open() which does all > > the magic to connect a network device with its phy. > You added call of mdiobus_scan to check if the slave has valid phy, I guess. > Or I misunderstood your commit: b2568de82d62c18fd5dc8affb0e4dc050403c498 > net: cpsw: ignore error on slave setup ? > > I guess it should work in follow: > If slave has a valid phy (determined by mdiobus_scan), slave will be > continue to register (call eth_register), > if not, cpsw_clave_setup function will exit with an error and next slave > will be try to register. You're right. I have overlooked the case that we do not want to register ethernet devices for slaves which do not have a valid phy. In this case, how about the following variant? Sascha -----------------------------8<------------------------------------ >From 44e7a94624f920188f55ca3fb45e9b74ba10e0c9 Mon Sep 17 00:00:00 2001 From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Date: Mon, 19 Feb 2018 07:50:56 +0100 Subject: [PATCH] net: cpsw: Call phy_device_connect() earlier We only want to register a slave when a valid phy is available. Instead of manually calling mdiobus_scan() and phy_register_device() we can let this do from phy_device_connect() which also works for fixed phys. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- drivers/net/cpsw.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index d11ca33f70..70e2721dd0 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -761,11 +761,6 @@ static int cpsw_open(struct eth_device *edev) dev_dbg(&slave->dev, "* %s\n", __func__); - ret = phy_device_connect(edev, &priv->miibus, slave->phy_id, - cpsw_adjust_link, 0, slave->phy_if); - if (ret) - return ret; - /* soft reset the controller and initialize priv */ soft_reset(priv, &priv->regs->soft_reset); @@ -913,16 +908,9 @@ static int cpsw_slave_setup(struct cpsw_slave *slave, int slave_num, struct eth_device *edev = &slave->edev; struct device_d *dev = &slave->dev; int ret; - struct phy_device *phy; - phy = mdiobus_scan(&priv->miibus, priv->slaves[slave_num].phy_id); - if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - goto err_out; - } - - phy->dev.device_node = priv->slaves[slave_num].dev.device_node; - ret = phy_register_device(phy); + ret = phy_device_connect(edev, &priv->miibus, slave->phy_id, + cpsw_adjust_link, 0, slave->phy_if); if (ret) goto err_out; @@ -957,7 +945,7 @@ static int cpsw_slave_setup(struct cpsw_slave *slave, int slave_num, return 0; err_register_dev: - phy_unregister_device(phy); + phy_unregister_device(edev->phydev); err_register_edev: unregister_device(dev); err_out: -- 2.15.1 -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox