U-Boot V2 Development (Barebox)

• Date Index

• Re: [PATCH 5/5] commands: nv: adjust command help, (continued)
  • Re: [PATCH 5/5] commands: nv: adjust command help, Sam Ravnborg
    • Re: [PATCH 5/5] commands: nv: adjust command help, Enrico Jörns
  • [PATCH 3/5] commands: nv: assure error code will be returned when an error occurred, Enrico Jorns
• [PATCH 1/5] ARM: boards: phytec-som-am335x: Add unified MLO, Daniel Schultz
  • [PATCH 3/5] ARM: configs: am335x_defconfig: Add state config, Daniel Schultz
  • [PATCH 5/5] ARM: phytec-som-am335x: Set MAC addresses from state, Daniel Schultz
  • [PATCH 2/5] ARM: dts: AM335x: Add state framework, Daniel Schultz
  • [PATCH 4/5] common: state: Make find_var public, Daniel Schultz
    • Re: [PATCH 4/5] common: state: Make find_var public, Sascha Hauer
• [PATCH 1/3] common: Add autoenable for components, Daniel Schultz
  • [PATCH 3/3] ARM: phytec-som-am335x: Add autoenable, Daniel Schultz
  • [PATCH 2/3] ARM: dts: AM335x: Add dummy i2c nodes, Daniel Schultz
  • Re: [PATCH 1/3] common: Add autoenable for components, Sascha Hauer
• [PATCH 1/2] efi-gui: add USB IO Protocol GUID definition, Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/2] efi-block: detect when the block device is a USB Disk, Jean-Christophe PLAGNIOL-VILLARD
    • Re: [PATCH 2/2] efi-block: detect when the block device is a USB Disk, Michael Olbrich
      • Re: [PATCH 2/2] efi-block: detect when the block device is a USB Disk, Sascha Hauer
  • Re: [PATCH 1/2] efi-gui: add USB IO Protocol GUID definition, Sascha Hauer
• [PATCH] EFI: add poweroff support, Jean-Christophe PLAGNIOL-VILLARD
  • Re: [PATCH] EFI: add poweroff support, Sascha Hauer
  • Re: [PATCH] EFI: add poweroff support, Antony Pavlov
• [PATCH] usb: imx: implement support for "over-current-active-high" property, Uwe Kleine-König
  • Re: [PATCH] usb: imx: implement support for "over-current-active-high" property, Sascha Hauer
• [PATCH 1/1] EFI: add poweroff support, Jean-Christophe PLAGNIOL-VILLARD
  • Re: [PATCH 1/1] EFI: add poweroff support, Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 0/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Uwe Kleine-König
  • [PATCH v2 1/3] ARM: i.MX: bbu-internal: make filename for device to write to adaptable, Uwe Kleine-König
  • [PATCH v2 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Uwe Kleine-König
  • [PATCH v2 3/3] ARM: i.MX: bbu-internal: update tqma6x to make use of new bbu handler, Uwe Kleine-König
  • Re: [PATCH v2 0/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Sascha Hauer
• [PATCH] arm: bootm: don't fall over if image is padded with less than 40 bytes, Lucas Stach
  • Re: [PATCH] arm: bootm: don't fall over if image is padded with less than 40 bytes, Sascha Hauer
• [PATCH] graphic_utils: Fix freeing uninitialzed pointer in fb_open(), Sascha Hauer
• Terasic DE0 Nano SoC / SoCkit confusion, Ian Abbott
  • Re: Terasic DE0 Nano SoC / SoCkit confusion, Steffen Trumtrar
    • Re: Terasic DE0 Nano SoC / SoCkit confusion, Ian Abbott
• [PATCH 1/3] ARM: i.MX: bbu-internal: make filename for device to write to adaptable, Uwe Kleine-König
  • [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler, Uwe Kleine-König
    • Re: [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler, Sascha Hauer
      • Re: [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler, Uwe Kleine-König
        • Re: [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler, Sascha Hauer
  • [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Uwe Kleine-König
    • Re: [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Sascha Hauer
      • Re: [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions, Uwe Kleine-König
• intel efi system too slow, Giorgio Dal Molin
  • Re: intel efi system too slow, Sascha Hauer
• [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi", Ulrich Ölmann
  • [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted, Ulrich Ölmann
    • Re: [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted, Uwe Kleine-König
      • Re: [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted, Ulrich Ölmann
  • [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted, Ulrich Ölmann
  • <Possible follow-ups>
  • [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi", Ulrich Ölmann
    • [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted, Ulrich Ölmann
    • [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted, Ulrich Ölmann
    • Re: [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi", Ulrich Ölmann
    • Re: [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi", Sascha Hauer
• [PATCH] OMAP_GPMC: this driver depends on MTD, Juergen Borleis
  • Re: [PATCH] OMAP_GPMC: this driver depends on MTD, Sascha Hauer
• [PATCH] UBI: attach: add missing newline at end of pr_err(), Marc Kleine-Budde
  • Re: [PATCH] UBI: attach: add missing newline at end of pr_err(), Sascha Hauer
• [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line(), Nikita Yushchenko
  • [PATCH 3/3] fbtest: add gradients pattern, Nikita Yushchenko
    • Re: [PATCH 3/3] fbtest: add gradients pattern, Sam Ravnborg
      • Re: [PATCH 3/3] fbtest: add gradients pattern, Sascha Hauer
  • [PATCH 2/3] fbtest: add solid pattern, Nikita Yushchenko
  • Re: [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line(), Chris Healy
• [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL, Philipp Zabel
  • Re: [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL, Sascha Hauer
• [PATCH v2 01/12] ARM: vexpress: always build relocatable image, Lucas Stach
  • [PATCH v2 04/12] clocksource: sp804: silently ignore secondary instaces, Lucas Stach
  • [PATCH v2 05/12] mci: mmci: add DT support, Lucas Stach
  • [PATCH v2 09/12] vexpress: use device tree provided by QEMU if available, Lucas Stach
  • [PATCH v2 02/12] of: populate clock providers before other devices, Lucas Stach
  • [PATCH v2 10/12] vexpress: add bootstate node to the device tree, Lucas Stach
  • [PATCH v2 12/12] ARM: vexpress: add fixup handler for 'virtio, mmio' devices, Lucas Stach
  • [PATCH v2 08/12] docs: add qemu vexpress, Lucas Stach
  • [PATCH v2 07/12] ARM: vexpress: regenerate config, Lucas Stach
  • [PATCH v2 03/12] clk: versatile: add basic clocks, Lucas Stach
  • [PATCH v2 11/12] of: base: add function to copy a device tree node, Lucas Stach
  • [PATCH v2 06/12] ARM: vexpress: switch to DT probe and multi-image build, Lucas Stach
  • Re: [PATCH v2 01/12] ARM: vexpress: always build relocatable image, Sascha Hauer
• [PATCH] efi: add missing Kconfig selects, Enrico Jorns
  • Re: [PATCH] efi: add missing Kconfig selects, Sascha Hauer
• [PATCH] Marvell: implement marvell_of_reg_init, Clément Leger
  • Re: [PATCH] Marvell: implement marvell_of_reg_init, Sascha Hauer
• [PATCH 0/5] sandbox: add gpio support with libftdi1, Antony Pavlov
  • [PATCH 1/5] sandbox: avoid symbol conflict for {open,read,close}dir, Antony Pavlov
  • [PATCH 3/5] sandbox: parse libftdi options, Antony Pavlov
    • Re: [PATCH 3/5] sandbox: parse libftdi options, Sascha Hauer
      • Re: [PATCH 3/5] sandbox: parse libftdi options, Antony Pavlov
        • Re: [PATCH 3/5] sandbox: parse libftdi options, Sascha Hauer
          • Re: [PATCH 3/5] sandbox: parse libftdi options, Antony Pavlov
            • Re: [PATCH 3/5] sandbox: parse libftdi options, Sascha Hauer
  • [PATCH 2/5] sandbox: add gpio support with libftdi1, Antony Pavlov
    • Re: [PATCH 2/5] sandbox: add gpio support with libftdi1, Sascha Hauer
  • [PATCH 5/5] sandbox: dts: add i2c and spi libftdi1 bit-bang example, Antony Pavlov
  • [PATCH 4/5] sandbox_defconfig: enable gpio, spi, i2c and led stuff, Antony Pavlov
• [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning, Antony Pavlov
  • Re: [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning, Sascha Hauer
• [PATCH v2 0/3] e1000: fix access to companion flash chip, Uwe Kleine-König
  • [PATCH v2 3/3] e1000: Don't poll for FLSWCTL.GLDONE before starting a flash transaction, Uwe Kleine-König
  • [PATCH v2 2/3] e1000: implement support for smaller flash chips, Uwe Kleine-König
  • [PATCH v2 1/3] e1000: implement register mapping for E1000_FLSW{CTL, DATA, CNT}, Uwe Kleine-König
  • Re: [PATCH v2 0/3] e1000: fix access to companion flash chip, Sascha Hauer
• [PATCH] elf.h: Use EI_NIDENT instead of numeric value, Antony Pavlov
  • Re: [PATCH] elf.h: Use EI_NIDENT instead of numeric value, Sascha Hauer
• [PATCH 0/3] e1000: access to flash on i210, Uwe Kleine-König
  • [PATCH 2/3] e1000: implement support for smaller flash chips, Uwe Kleine-König
    • Re: [PATCH 2/3] e1000: implement support for smaller flash chips, Andrey Smirnov
  • [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle, Uwe Kleine-König
    • Re: [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle, Uwe Kleine-König
      • Re: [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle, Andrey Smirnov
        • Re: [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle, Uwe Kleine-König
  • [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}}, Uwe Kleine-König
    • Re: [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}}, Andrey Smirnov
      • Re: [PATCH 1/3] e1000: implement register mapping for E1000_{EERD,FLSW{CTL,DATA,CNT}}, Uwe Kleine-König
• again [PATCH v1 2/2] command ccrypt, Gerd Pauli
• [PATCH v1 1/2] ccryptlib: library for encrypting/decrypting, Gerd Pauli
• [PATCH v1 2/2] command ccrypt, Gerd Pauli
• [PATCH] regmap: port regmap_update_bits from linux, Steffen Trumtrar
  • Re: [PATCH] regmap: port regmap_update_bits from linux, Sascha Hauer
• [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes, Steffen Trumtrar
  • Re: [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes, Sascha Hauer
• [PATCH v1] writef: added command to write content of variable to file, Gerd Pauli
  • Re: [PATCH v1] writef: added command to write content of variable to file, Sascha Hauer
• v2017.10.0, Sascha Hauer
• Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Marcel Hamer
  • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Sascha Hauer
    • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Marcel Hamer
      • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Ian Abbott
        • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Marcel Hamer
          • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, gianluca
            • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled, Marcel Hamer
• [PATCH v1] MIPS: tplink-wdr4300_defconfig: enable RATP, Oleksij Rempel
• [PATCH v1 1/2] clk: add ar9344 clock driver, Oleksij Rempel
  • [PATCH v1 2/2] MIPS: dts: ar9344: add pll node, Oleksij Rempel
  • Re: [PATCH v1 1/2] clk: add ar9344 clock driver, Sascha Hauer
• [PATCH] net: ag71xx: define parent devices, Oleksij Rempel
  • Re: [PATCH] net: ag71xx: define parent devices, Sascha Hauer
• how to persistently save config values, Giorgio Dal Molin
  • Re: how to persistently save config values, Oleksij Rempel
  • Re: how to persistently save config values, B Gol
    • Re: how to persistently save config values, Giorgio Dal Molin
  • Re: how to persistently save config values, Sascha Hauer
    • Re: how to persistently save config values, Giorgio Dal Molin
      • Re: how to persistently save config values, Sascha Hauer
• [RFC v4 00/10] add initial RISC-V architecture support, Antony Pavlov
  • [RFC v4 02/10] RISC-V: add Erizo SoC support, Antony Pavlov
    • Re: [RFC v4 02/10] RISC-V: add Erizo SoC support, Oleksij Rempel
      • Re: [RFC v4 02/10] RISC-V: add Erizo SoC support, Antony Pavlov
  • [RFC v4 03/10] RISC-V: add low-level debug macros for ns16550, Antony Pavlov
  • [RFC v4 06/10] RISC-V: erizo: enable NMON, Antony Pavlov
  • [RFC v4 04/10] RISC-V: add nmon nano-monitor, Antony Pavlov
    • Re: [RFC v4 04/10] RISC-V: add nmon nano-monitor, Oleksij Rempel
      • Re: [RFC v4 04/10] RISC-V: add nmon nano-monitor, Antony Pavlov
  • [RFC v4 05/10] RISC-V: erizo: add DEBUG_LL support, Antony Pavlov
  • [RFC v4 08/10] RISC-V: add erizo_generic_defconfig, Antony Pavlov
    • Re: [RFC v4 08/10] RISC-V: add erizo_generic_defconfig, Oleksij Rempel
      • Re: [RFC v4 08/10] RISC-V: add erizo_generic_defconfig, Antony Pavlov
  • [RFC v4 07/10] RISC-V: erizo: add nmon image creation, Antony Pavlov
  • [RFC v4 09/10] scripts: add nmon-loader, Antony Pavlov
  • [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
    • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Oleksij Rempel
      • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
        • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Oleksij Rempel
          • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
        • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Daniel Schultz
          • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
      • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Daniel Schultz
        • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
          • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Daniel Schultz
            • Re: [RFC v4 01/10] Add initial RISC-V architecture support, Antony Pavlov
  • [RFC v4 10/10] Documentation: add RISC-V docs, Antony Pavlov
    • Re: [RFC v4 10/10] Documentation: add RISC-V docs, Oleksij Rempel
      • Re: [RFC v4 10/10] Documentation: add RISC-V docs, Antony Pavlov
• [PATCH v2] Add i.MX6ull EVK Support, Sascha Hauer
  • [PATCH 1/2] ARM: i.MX6ul: Add SoC specific lowlevel_init function, Sascha Hauer
  • [PATCH 2/2] ARM: Add i.MX6ull evk support, Sascha Hauer
• [PATCH v2 0/3] state: add support for pre-mainline state format, Uwe Kleine-König
  • [PATCH v2 2/3] state: new backend format "rawcompat", Uwe Kleine-König
  • [PATCH v2 3/3] state: storage: direct: skip writing meta data if this makes data fit, Uwe Kleine-König
  • [PATCH v2 1/3] Documentation: state: adapt description to reality, Uwe Kleine-König
    • Re: [PATCH v2 1/3] Documentation: state: adapt description to reality, Sascha Hauer
• barebox fb console on an EFI system, Giorgio Dal Molin
• [PATCH 1/2] ARM: i.MX6ull: Add SoC specific lowlevel_init function, Sascha Hauer
  • [PATCH 2/2] i.MX6ull evk support, Sascha Hauer
    • Re: [PATCH 2/2] i.MX6ull evk support, Lucas Stach
      • Re: [PATCH 2/2] i.MX6ull evk support, Sascha Hauer
        • Re: [PATCH 2/2] i.MX6ull evk support, Lucas Stach
          • Re: [PATCH 2/2] i.MX6ull evk support, Sascha Hauer
            • Re: [PATCH 2/2] i.MX6ull evk support, Philipp Zabel
  • Re: [PATCH 1/2] ARM: i.MX6ull: Add SoC specific lowlevel_init function, Lucas Stach
• usbgadget: fastboot: Allow to automatically export bbu handlers, Sascha Hauer
  • [PATCH 12/12] usbgadget autostart: add usbgadget.fastboot_bbu to automatically export bbu handlers, Sascha Hauer
  • [PATCH 03/12] file_list: Allow only unique names on list, Sascha Hauer
  • [PATCH 06/12] file_list: Add error messages, Sascha Hauer
  • [PATCH 08/12] bbu: Add function to iterate over registered handlers, Sascha Hauer
  • [PATCH 11/12] fastboot command: Add -b option to export bbu handlers, Sascha Hauer
  • [PATCH 09/12] usbgadget command: catch errors when parsing the file list, Sascha Hauer
  • [PATCH 01/12] file_list: Add function to add an entry to the list, Sascha Hauer
  • [PATCH 07/12] usbgadget: fastboot: Use function to find file_list entry by name, Sascha Hauer
  • [PATCH 04/12] file_list: Fix memory leak in failure path, Sascha Hauer
  • [PATCH 10/12] usbgadget: fastboot: Allow to automatically export the bbu handlers, Sascha Hauer
  • [PATCH 05/12] file_list: Add GPL header to file, Sascha Hauer
  • [PATCH 02/12] file_list: Add function to get entry by its name, Sascha Hauer
• usbgadget fix some crashes, Sascha Hauer
  • [PATCH 3/4] usbgadget: only set to peripheral mode when error checking is done, Sascha Hauer
    • Re: [PATCH 3/4] usbgadget: only set to peripheral mode when error checking is done, Oleksij Rempel
  • [PATCH 1/4] usbgadget: autostart: Handle errors in file list gracefully, Sascha Hauer
    • Re: [PATCH 1/4] usbgadget: autostart: Handle errors in file list gracefully, Oleksij Rempel
  • [PATCH 4/4] usbgadget: unregister when usb_composite_probe() fails, Sascha Hauer
    • Re: [PATCH 4/4] usbgadget: unregister when usb_composite_probe() fails, Oleksij Rempel
  • [PATCH 2/4] usbgadget: do not register when no functions present, Sascha Hauer
    • Re: [PATCH 2/4] usbgadget: do not register when no functions present, Oleksij Rempel
• barebox on an intel efi system, Giorgio Dal Molin
  • Re: barebox on an intel efi system, Oleksij Rempel
    • Re: barebox on an intel efi system, Giorgio Dal Molin
• [PATCH 0/3] gpiolib: introduce gpio initializer, Uwe Kleine-König
  • [PATCH 3/3] gpiolib: introduce gpio initializer, Uwe Kleine-König
  • [PATCH 1/3] gpiolib: reorder functions, Uwe Kleine-König
  • [PATCH 2/3] gpiolib: introduce helper functions working on gpio_info structs, Uwe Kleine-König
  • Re: [PATCH 0/3] gpiolib: introduce gpio initializer, Sascha Hauer
    • Re: [PATCH 0/3] gpiolib: introduce gpio initializer, Uwe Kleine-König
• [PATCH 0/2] state: add support for pre-mainline state format, Uwe Kleine-König
  • [PATCH 2/2] state: storage: direct: skip writing meta data if this makes data fit, Uwe Kleine-König
  • [PATCH 1/2] state: new backend format "rawcompat", Uwe Kleine-König
• [PATCH 1/2] scripts: imx imx-usb-loader: Add support for i.MX6ull, Sascha Hauer
  • [PATCH 2/2] scripts: imx imx-usb-loader: Fix last transfer error message, Sascha Hauer
• [PATCH] remove checks for xzalloc() returning NULL, Uwe Kleine-König
  • Re: [PATCH] remove checks for xzalloc() returning NULL, Sascha Hauer
• [PATCH] pinctrl: mxs: fix error message to mention right property name, Uwe Kleine-König
  • Re: [PATCH] pinctrl: mxs: fix error message to mention right property name, Sascha Hauer
• [PATCH] imx-bbu-nand-fcb: read_firmware_all(): Spell "Secondary firmware" with a capital "S", Marc Kleine-Budde
  • Re: [PATCH] imx-bbu-nand-fcb: read_firmware_all(): Spell "Secondary firmware" with a capital "S", Sascha Hauer
• [PATCH] ARM: i.MX53 QSB: drop phy reset handling in board file, Uwe Kleine-König
  • Re: [PATCH] ARM: i.MX53 QSB: drop phy reset handling in board file, Sascha Hauer
• [PATCH v2] gpiolib: check validity for gpio_info in *_active(), Uwe Kleine-König
  • Re: [PATCH v2] gpiolib: check validity for gpio_info in *_active(), Sascha Hauer
• [PATCH] gpiolib: check validity for gpio_info in *_active(), Uwe Kleine-König
  • Re: [PATCH] gpiolib: check validity for gpio_info in *_active(), Sascha Hauer
• [PATCH] console_countdown: ignore errors in getchar(), Aleksander Morgado
  • Re: [PATCH] console_countdown: ignore errors in getchar(), Sascha Hauer
• [PATCH v1 1/3] net: ag71xx: define parent devices, Oleksij Rempel
  • [PATCH v1 3/3] MIPS: ath79: provide driver for Atheros ART partition, Oleksij Rempel
  • [PATCH v1 2/3] MIPS: dts: tl_wdr4300: add Atheros ART partition, Oleksij Rempel
    • Re: [PATCH v1 2/3] MIPS: dts: tl_wdr4300: add Atheros ART partition, Sascha Hauer
      • Re: [PATCH v1 2/3] MIPS: dts: tl_wdr4300: add Atheros ART partition, Oleksij Rempel
• [PATCH] mmc: allow skipping SD card initialization, Philipp Zabel
  • Re: [PATCH] mmc: allow skipping SD card initialization, Sascha Hauer
• [PATCH] lib,ratp: avoid too verbose info messages, Aleksander Morgado
  • Re: [PATCH] lib,ratp: avoid too verbose info messages, Sascha Hauer
• [PATCH] bootm: bootm_open_initrd_uimage(): propagate error if initrd verification fails, Marc Kleine-Budde
  • Re: [PATCH] bootm: bootm_open_initrd_uimage(): propagate error if initrd verification fails, Sascha Hauer
• bootm_open_initrd_uimage: result of uimage_verify() is ignored, Marc Kleine-Budde
  • Re: bootm_open_initrd_uimage: result of uimage_verify() is ignored, Sascha Hauer
• [PATCH v1] net: ag71xx: disable eth interface on barebox shutdown, Oleksij Rempel
  • Re: [PATCH v1] net: ag71xx: disable eth interface on barebox shutdown, Sascha Hauer
• [PATCH] memtest: fix list iteration in region setup, Steffen Trumtrar
  • Re: [PATCH] memtest: fix list iteration in region setup, Sascha Hauer
• [PATCH 1/2] ARM: imx: santaro: select i2c, Lucas Stach
  • [PATCH 2/2] imx-bbu-nand-fcb: fix build on MX28 only, Lucas Stach
    • Re: [PATCH 2/2] imx-bbu-nand-fcb: fix build on MX28 only, Sam Ravnborg
      • Re: [PATCH 2/2] imx-bbu-nand-fcb: fix build on MX28 only, Sascha Hauer
• [PATCH 00/12] Vexpress rework, Lucas Stach
  • [PATCH 02/12] of: populate clock providers before other devices, Lucas Stach
  • [PATCH 01/12] ARM: vexpress: always build relocatable image, Lucas Stach
  • [PATCH 06/12] ARM: vexpress: switch to DT probe and multi-image build, Lucas Stach
  • [PATCH 04/12] clocksource: sp804: silently ignore secondary instaces, Lucas Stach
  • [PATCH 09/12] vexpress: use device tree provided by QEMU if available, Lucas Stach
  • [PATCH 12/12] ARM: vexpress: add fixup handler for 'virtio, mmio' devices, Lucas Stach
  • [PATCH 05/12] mci: mmci: add DT support, Lucas Stach
    • Re: [PATCH 05/12] mci: mmci: add DT support, Sam Ravnborg
  • [PATCH 07/12] ARM: vexpress: regenerate config, Lucas Stach
  • [PATCH 11/12] of: base: add funtion to copy a device tree node, Lucas Stach
    • Re: [PATCH 11/12] of: base: add funtion to copy a device tree node, Sascha Hauer
  • [PATCH 03/12] clk: versatile: add basic clocks, Lucas Stach
    • Re: [PATCH 03/12] clk: versatile: add basic clocks, Sam Ravnborg
  • [PATCH 10/12] vexpress: add bootstate node to the device tree, Lucas Stach
  • [PATCH 08/12] docs: add qemu vexpress, Lucas Stach
• Load environment variables earlier, zjh
  • Re: Load environment variables earlier, Oleksij Rempel
  • Re: Load environment variables earlier, Sascha Hauer
• [PATCH v1 3/3] yubikey authentication in login, ykpasswd command to manage the database, gp
• [PATCH v1 2/2] command: ccrypt Crypt and Decrypt Files uses keystore for passwords compatible with https://sourceforge.net/projects/ccrypt/ keystore_init Simple Keystore initializer, gp
  • Re: [PATCH v1 2/2] command: ccrypt Crypt and Decrypt Files uses keystore for passwords compatible with https://sourceforge.net/projects/ccrypt/ keystore_init Simple Keystore initializer, Sascha Hauer
• [PATCH v1 1/2] commands: writef write variable contents to file, gp
  • Re: [PATCH v1 1/2] commands: writef write variable contents to file, Oleksij Rempel
• move to github, zjh
  • Re: move to github, Alexander Shiyan
    • Re: move to github, zjh
  • Re: move to github, Sascha Hauer
    • Re: move to github, Jean-Christophe PLAGNIOL-VILLARD
    • Message not available
      • Re: move to github, Sascha Hauer
• [PATCH v3 00/10] provide ethernet support for ar9344 and ar9331, Oleksij Rempel
  • [PATCH v3 01/10] net: ath79: add ag71xx Ethernet driver, Oleksij Rempel
  • [PATCH v3 03/10] MIPS: dts: ar9344: add mac0 node, Oleksij Rempel
  • [PATCH v3 02/10] add ar9331.dtsi and enable mac0, Oleksij Rempel
  • [PATCH v3 05/10] MIPS: dts: tl_wdr4300: add alias for spiflash, Oleksij Rempel
  • [PATCH v3 07/10] add phy: ar8327 driver, Oleksij Rempel
  • [PATCH v3 04/10] MIPS: dts: tl_wdr4300: enable mac0, Oleksij Rempel
  • [PATCH v3 08/10] MIPS: dts: tl_wdr4300: rename it to tl_wdr4300 v1.7, Oleksij Rempel
  • [PATCH v3 06/10] MIPS: dts: tl_wdr4300: remove RO flag from barebox partition, Oleksij Rempel
  • [PATCH v3 10/10] MIPS: dts: ar9344: add APB bus, Oleksij Rempel
  • [PATCH v3 09/10] MIPS: tplink-wdr4300_defconfig: add network support, Oleksij Rempel
  • Re: [PATCH v3 00/10] provide ethernet support for ar9344 and ar9331, Sascha Hauer
    • Re: [PATCH v3 00/10] provide ethernet support for ar9344 and ar9331, Antony Pavlov
      • Re: [PATCH v3 00/10] provide ethernet support for ar9344 and ar9331, Sascha Hauer
• yubikey and aes support for barebox, Gerd Pauli
  • Re: yubikey and aes support for barebox, Oleksij Rempel
• [PATCH v2 00/10] provide ethernet support for ar9344 and ar9331, Oleksij Rempel
  • [PATCH v2 10/10] MIPS: dts: ar9344: add APB bus, Oleksij Rempel
  • [PATCH v2 03/10] MIPS: dts: ar9344: add mac0 node, Oleksij Rempel
  • [PATCH v2 02/10] add ar9331.dtsi and enable mac0, Oleksij Rempel
  • [PATCH v2 09/10] MIPS: tplink-wdr4300_defconfig: add network support, Oleksij Rempel
  • [PATCH v2 04/10] MIPS: dts: tl_wdr4300: enable mac0, Oleksij Rempel
  • [PATCH v2 08/10] MIPS: dts: tl_wdr4300: rename it to tl_wdr4300 v1.7, Oleksij Rempel
  • [PATCH v2 05/10] MIPS: dts: tl_wdr4300: add alias for spiflash, Oleksij Rempel
  • [PATCH v2 06/10] MIPS: dts: tl_wdr4300: remove RO flag from barebox partition, Oleksij Rempel
  • [PATCH v2 07/10] add phy: ar8327 driver, Oleksij Rempel
  • [PATCH v2 01/10] net: ath79: add ag71xx Ethernet driver, Oleksij Rempel
    • Re: [PATCH v2 01/10] net: ath79: add ag71xx Ethernet driver, Sascha Hauer
• [PATCH 0/5] Fixes for nv command handling, Enrico Jorns
  • [PATCH 1/5] commands: nv: argc cannot be < 1, Enrico Jorns
    • Re: [PATCH 1/5] commands: nv: argc cannot be < 1, Sascha Hauer
      • Re: [PATCH 1/5] commands: nv: argc cannot be < 1, Enrico Joerns
  • [PATCH 2/5] commands: nv: call nvvar_print() only if no argument is given, Enrico Jorns
  • [PATCH 3/5] commands: nv: assure error code will be returned when an error occurred, Enrico Jorns
  • [PATCH 5/5] common: globvar: let nvvar_remove() report non-existing variable, Enrico Jorns
  • [PATCH 4/5] commands: nv: fail if required var arguments are missing, Enrico Jorns
  • [PATCH] commands: nv: adjust command help, Enrico Jorns
• PBL using xz, zjh
• boot problem w/ barebox, Enrico Weigelt, metux IT consult
  • Re: boot problem w/ barebox, Uwe Kleine-König
    • Re: boot problem w/ barebox, Enrico Weigelt, metux IT consult
      • Re: [ptxdist] boot problem w/ barebox, Uwe Kleine-König
• v2017.09.0, Sascha Hauer
• [PATCH v2 0/2] gpio: gpio-generic: add dt support, Antony Pavlov
  • [PATCH v2 1/2] gpio: gpio-generic: fix bgpio_map(), Antony Pavlov
  • [PATCH v2 2/2] gpio: gpio-generic: add dt support, Antony Pavlov
  • Re: [PATCH v2 0/2] gpio: gpio-generic: add dt support, Sascha Hauer
• [PATCH 0/4] privide ns16550 support for AR9344, Oleksij Rempel
  • [PATCH 4/4] serial: ns16550: provide big-endian support, Oleksij Rempel
  • [PATCH 3/4] x86: asm: include asm-generic.h, Oleksij Rempel
  • [PATCH 2/4] asm-generic: partially sync io.h with linux kernel, Oleksij Rempel
  • [PATCH 1/4] of: base: port of_device_is_big_endian from linux, Oleksij Rempel
  • Re: [PATCH 0/4] privide ns16550 support for AR9344, Robert Schwebel
  • Re: [PATCH 0/4] privide ns16550 support for AR9344, Sascha Hauer
• [PATCH] efi: add iBASE MI991AF documentation., Oleksij Rempel
  • Re: [PATCH] efi: add iBASE MI991AF documentation., Sascha Hauer
• [PATCH] efi: make sure efi-fs is started in the right order, Oleksij Rempel
  • Re: [PATCH] efi: make sure efi-fs is started in the right order, Sascha Hauer
• [PATCH] Documentation: efi: add example how to create EFI partition, Oleksij Rempel
  • Re: [PATCH] Documentation: efi: add example how to create EFI partition, Sascha Hauer
• [PATCH 1/2] mtd: nand: Only call ONFI get/set features on supported chips, Sascha Hauer
  • [PATCH 2/2] mtd: nand: nand_mxs: Don't call get/set features on chips which do not support it, Sascha Hauer
• [PATCH] Phy: Check NULL bus case and undetected phy via of, Clément Leger
  • Re: [PATCH] Phy: Check NULL bus case and undetected phy via of, Sascha Hauer
• Fix tftpd-hpa support, Sascha Hauer
  • [PATCH 1/2] fs: avoid pathes with '//' in __canonicalize_path(), Sascha Hauer
  • [PATCH 2/2] fs: Don't bother filesystems without link support with additional stat() calls, Sascha Hauer
• [PATCH 0/2] gpio: gpio-generic: add dt support, Antony Pavlov
  • [PATCH 2/2] gpio: gpio-generic: add dt support, Antony Pavlov
  • [PATCH 1/2] gpio: gpio-generic: fix bgpio_map(), Antony Pavlov
    • Re: [PATCH 1/2] gpio: gpio-generic: fix bgpio_map(), Sascha Hauer
• [BUG] TFTP: No access to subdirectories, Dennis Menschel
  • Re: [BUG] TFTP: No access to subdirectories, Antony Pavlov
    • Re: [BUG] TFTP: No access to subdirectories, Dennis Menschel
  • <Possible follow-ups>
  • Re: [BUG] TFTP: No access to subdirectories, Franz Forstmayr
    • Re: [BUG] TFTP: No access to subdirectories, Sascha Hauer
      • Re: [BUG] TFTP: No access to subdirectories, Franz Forstmayr
        • Re: [BUG] TFTP: No access to subdirectories, Sascha Hauer
• nand dump, zjh
  • Re: nand dump, Jan Lübbe
• TCP, zjh
  • Re: TCP, Oleksij Rempel
    • Re: TCP, Antony Pavlov
      • Re: TCP, Oleksij Rempel
• [PATCH v1 00/10] provide ethernet support for ar9344 and TP-LINK TL-WDR4300, Oleksij Rempel
  • [PATCH v1 09/10] MIPS: tplink-wdr4300_defconfig: add network support, Oleksij Rempel
  • [PATCH v1 01/10] net: ath79: add ar9344 support, Oleksij Rempel
    • Re: [PATCH v1 01/10] net: ath79: add ar9344 support, Sascha Hauer
  • [PATCH v1 03/10] MIPS: dts: ar9344: add mac0 node, Oleksij Rempel
  • [PATCH v1 08/10] rename tplink devicetree, Oleksij Rempel
    • Re: [PATCH v1 08/10] rename tplink devicetree, Sascha Hauer
  • [PATCH v1 10/10] MIPS: dts: ar9344: add APB bus, Oleksij Rempel
  • [PATCH v1 05/10] MIPS: dts: tl_wdr4300: add alias for spiflash, Oleksij Rempel
  • [PATCH v1 06/10] MIPS: dts: tl_wdr4300: remove RO flag from barebox partition, Oleksij Rempel
  • [PATCH v1 02/10] MIPS: dts: ar9331: update compatible for mac0 node, Oleksij Rempel
    • Re: [PATCH v1 02/10] MIPS: dts: ar9331: update compatible for mac0 node, Sascha Hauer
  • [PATCH v1 04/10] MIPS: dts: tl_wdr4300: enable mac0, Oleksij Rempel
  • [PATCH v1 07/10] add phy: ar8327 driver, Oleksij Rempel
    • Re: [PATCH v1 07/10] add phy: ar8327 driver, Sascha Hauer
• [PATCH] phy: don't crush if we have no parent, Oleksij Rempel
  • Re: [PATCH] phy: don't crush if we have no parent, Sascha Hauer
• [PATCH] ARM: phycore-imx6ul: use MAC address from OCOTP, Lucas Stach
  • Re: [PATCH] ARM: phycore-imx6ul: use MAC address from OCOTP, Sascha Hauer
• [PATCH] mtd: nand-mxs: improve error messages, Uwe Kleine-König
  • Re: [PATCH] mtd: nand-mxs: improve error messages, Sascha Hauer
• [PATCH v2] docs: mention the correct default values for the 'backend-storage-type', Juergen Borleis
• [PATCH] docs: mention the correct default values for the 'backend-storage-type', Juergen Borleis
  • Re: [PATCH] docs: mention the correct default values for the 'backend-storage-type', Juergen Borleis
• [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som, Daniel Schultz
  • [PATCH 3/4] arm: dts: am335x: Add phycore emmc device tree, Daniel Schultz
  • [PATCH 2/4] arm: dts: Enable NAND in DTS instead of DTSI, Daniel Schultz
  • [PATCH 4/4] arm: configs: AM335x: Enable mmc-extcsd command, Daniel Schultz
  • Re: [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som, Sascha Hauer
• [PATCH 1/1] TFTP: Add support for custom server and port, Clément Leger
  • Re: [PATCH 1/1] TFTP: Add support for custom server and port, Oleksij Rempel
    • Re: [PATCH 1/1] TFTP: Add support for custom server and port, Clément Leger
• Request for testing on beagleboard, Denis 'GNUtoo' Carikli
  • [PATCH] ARM: beagleboard: convert to devicetree, Denis 'GNUtoo' Carikli
  • Re: Request for testing on beagleboard, Sascha Hauer
• [PATCH v1 1/3] net: ath79: add ag71xx Ethernet driver, Oleksij Rempel
  • [PATCH v1 2/3] net: ag71xx: bit 19 should be set to 1 for GE0, Oleksij Rempel
  • [PATCH v1 3/3] add ar9331.dtsi and enable mac0, Oleksij Rempel
  • Re: [PATCH v1 1/3] net: ath79: add ag71xx Ethernet driver, Sascha Hauer
• [PATCH v2 0/4] privide ns16550 support for AR9344, Oleksij Rempel
  • [PATCH v2 3/4] x86: asm: include asm-generic.h, Oleksij Rempel
  • [PATCH v2 4/4] serial: ns16550: provide big-endian support, Oleksij Rempel
  • [PATCH v2 2/4] asm-generic: partially sync io.h with linux kernel, Oleksij Rempel
    • Re: [PATCH v2 2/4] asm-generic: partially sync io.h with linux kernel, Sascha Hauer
  • [PATCH v2 1/4] of: base: port of_device_is_big_endian from linux, Oleksij Rempel
• [PATCH 1/2] state: use the given backend storage type name, Juergen Borleis
  • [PATCH 2/2] state: don't use uninitialized variable, Juergen Borleis
  • Re: [PATCH 1/2] state: use the given backend storage type name, Sascha Hauer
• [PATCH 1/3] state: provide an error message when an error occurs, Juergen Borleis
  • [PATCH 2/3] state command: extend help part I, Juergen Borleis
  • [PATCH 3/3] state command: extend help part II, Juergen Borleis
  • Re: [PATCH 1/3] state: provide an error message when an error occurs, Uwe Kleine-König
    • Re: [PATCH 1/3] state: provide an error message when an error occurs, Juergen Borleis
  • Re: [PATCH 1/3] state: provide an error message when an error occurs, Sascha Hauer
• [PATCH] i2c: mv64xxx: add timeout waiting for bus ready, Bastian Stender
  • Re: [PATCH] i2c: mv64xxx: add timeout waiting for bus ready, Bastian Stender
    • Re: [PATCH] i2c: mv64xxx: add timeout waiting for bus ready, Sascha Hauer
      • Re: [PATCH] i2c: mv64xxx: add timeout waiting for bus ready, Bastian Stender
        • Re: [PATCH] i2c: mv64xxx: add timeout waiting for bus ready, Sascha Hauer
• Rework of the state/bootchooser feature documentaiton, Juergen Borleis
  • [PATCH 6/7] state: add debugging help, Juergen Borleis
  • [PATCH 4/7] bootchooser: allow an empty namespace, Juergen Borleis
  • [PATCH 1/7] docs/DS1307: fix layout, Juergen Borleis
  • [PATCH 3/7] bootchooser: avoid a use after free, Juergen Borleis
  • [PATCH 5/7] docs: remove build warning, Juergen Borleis
  • [PATCH 2/7] state: keep backward compatibility, Juergen Borleis
  • [PATCH 7/7] docs: rework and extend the 'state' and 'bootchooser' documentation, Juergen Borleis
  • Re: Rework of the state/bootchooser feature documentaiton, Sascha Hauer
• [PATCH] ARM: mvebu: armada-xp: configure PLL and PHY register, Jan Luebbe
  • Re: [PATCH] ARM: mvebu: armada-xp: configure PLL and PHY register, Uwe Kleine-König
    • Re: [PATCH] ARM: mvebu: armada-xp: configure PLL and PHY register, Jan Lübbe
• Barebox and ext4 ? problems, Holger Schurig
  • Re: Barebox and ext4 ? problems, Ian Abbott
  • Re: Barebox and ext4 ? problems, Simon Aittamaa
    • Re: Barebox and ext4 ? problems, Holger Schurig
      • Re: Barebox and ext4 ? problems, Lucas Stach
• [PATCH v3] MIPS: add virt_to_phys() and phys_to_virt(), Oleksij Rempel
• [PATCH v2] MIPS: add virt_to_phys() and phys_to_virt(), Oleksij Rempel
  • Re: [PATCH v2] MIPS: add virt_to_phys() and phys_to_virt(), Lucas Stach
• [PATCH v1 1/4] MIPS: tplink-mr3020: pbl: move WMAC init after flash addr test, Oleksij Rempel
  • [PATCH v1 3/4] MIPS: tplink-mr3020_defconfig: enable more options, Oleksij Rempel
  • [PATCH v1 4/4] MIPS: tplink-mr3020.dts: add partition table, Oleksij Rempel
  • [PATCH v1 2/4] MIPS: tplink-mr3020: pbl: move hornet_mips24k_cp0_setup after flash addr test, Oleksij Rempel
• [PATCH v1] MIPS: ath79: add barebox update handler, Oleksij Rempel
• [PATCH v1] filetype: fix file type detection for Barebox MIPS, Oleksij Rempel
• [PATCH v1 0/3] provide basic support for TP-Link WDR4300, Oleksij Rempel
  • [PATCH v1 1/3] MIPS: ath79: provide CONFIG_SOC_QCA_AR9331 option, Oleksij Rempel
  • [PATCH v1 3/3] MIPS: ath79: add TP-Link WDR4300 board support, Oleksij Rempel
  • [PATCH v1 2/3] MIPS: ath79: add initial QCA AR9344 SoC support, Oleksij Rempel
• [PATCH 0/2] readline_simple: return -1 if getc fails, Gaël PORTAY
  • [PATCH 1/2] readline_simple: return -1 if getc fails, Gaël PORTAY
    • Re: [PATCH 1/2] readline_simple: return -1 if getc fails, Lucas Stach
      • Re: [PATCH 1/2] readline_simple: return -1 if getc fails, Ian Abbott
        • Re: [PATCH 1/2] readline_simple: return -1 if getc fails, Gaël PORTAY
      • Re: [PATCH 1/2] readline_simple: return -1 if getc fails, Gaël PORTAY
        • Re: [PATCH 1/2] readline_simple: return -1 if getc fails, Lucas Stach
          • Re: [PATCH 1/2] readline_simple: return -1 if getc fails, Ian Abbott
            • Re: [PATCH 1/2] readline_simple: return -1 if getc fails, Gaël PORTAY
          • Re: [PATCH 1/2] readline_simple: return -1 if getc fails, Gaël PORTAY
  • [PATCH 2/2] readline_simple: remove obsolete documentation, Gaël PORTAY
  • <Possible follow-ups>
  • [PATCH 0/2] readline_simple: return -1 if getc fails, Gaël PORTAY
    • [PATCH v2 1/2] readline_simple: return -1 if getc fails, Gaël PORTAY
    • [PATCH v2 2/2] readline_simple: remove obsolete documentation, Gaël PORTAY
    • Re: [PATCH 0/2] readline_simple: return -1 if getc fails, Oleksij Rempel
      • Re: [PATCH 0/2] readline_simple: return -1 if getc fails, Gaël PORTAY
        • Re: [PATCH 0/2] readline_simple: return -1 if getc fails, Oleksij Rempel
        • Re: [PATCH 0/2] readline_simple: return -1 if getc fails, Antony Pavlov
• [PATCH v2 01/13] MIPS: ath79: provide CONFIG_SOC_QCA_AR9331 option, Oleksij Rempel
  • [PATCH v2 04/13] MIPS: add virt_to_phys() and phys_to_virt(), Oleksij Rempel
    • Re: [PATCH v2 04/13] MIPS: add virt_to_phys() and phys_to_virt(), Peter Mamonov
  • [PATCH v2 11/13] MIPS: ar9344.dtsi: add ag71xx Ethernet driver, Oleksij Rempel
  • [PATCH v2 06/13] net: ag71xx: bit 19 should be set to 1 for GE0, Oleksij Rempel
  • [PATCH v2 09/13] MIPS: tplink-mr3020_defconfig: enable more options, Oleksij Rempel
  • [PATCH v2 08/13] MIPS: tplink-mr3020: pbl: move hornet_mips24k_cp0_setup after flash addr test, Oleksij Rempel
  • [PATCH v2 07/13] MIPS: tplink-mr3020: pbl: move WMAC init after flash addr test, Oleksij Rempel
  • [PATCH v2 12/13] MIPS: ath79: add barebox update handler, Oleksij Rempel
  • [PATCH v2 10/13] MIPS: tplink-mr3020.dts: add partition table, Oleksij Rempel
  • [PATCH v2 13/13] filetype: fix file type detection for Barebox MIPS, Oleksij Rempel
  • [PATCH v2 05/13] net: ath79: add ag71xx Ethernet driver, Oleksij Rempel
    • Re: [PATCH v2 05/13] net: ath79: add ag71xx Ethernet driver, Peter Mamonov
      • Re: [PATCH v2 05/13] net: ath79: add ag71xx Ethernet driver, Lucas Stach
  • [PATCH v2 03/13] MIPS: ath79: add TP-Link WDR4300 board support, Oleksij Rempel
  • [PATCH v2 02/13] MIPS: ath79: add initial QCA AR9344 SoC support, Oleksij Rempel
  • Re: [PATCH v2 01/13] MIPS: ath79: provide CONFIG_SOC_QCA_AR9331 option, Oleksij Rempel
• [PATCH 1/2] ARM: imx: add stub for imx7_uart_setup_ll, Lucas Stach
  • [PATCH 2/2] ARM: imx7: sabreSD: remove duplicate DT nodes, Lucas Stach
• [PATCH 1/3] ARM: imx: fix phyBOARD-Zeta pinfunc typo, Lucas Stach
  • [PATCH 2/3] ARM: imx: build imx6.o as ARMv7, Lucas Stach
  • [PATCH 3/3] ARM: imx: ccmx53: select I2C, Lucas Stach
• [PATCH] scripts/imx: fix out-of-bounds access for big DCD tables, Uwe Kleine-König
• [PATCH] ARM: imx: imx7 has a fec, Uwe Kleine-König
  • Re: [PATCH] ARM: imx: imx7 has a fec, Lucas Stach
• [PATCH] clk: imx: cpu: don't store the address of a function parameter, Uwe Kleine-König
• [PATCH 0/2] spi: imx: don't loop endlessly, Uwe Kleine-König
  • [PATCH 1/2] spi: imx: add error checking, Uwe Kleine-König
  • [PATCH 2/2] spi: imx: add timeout to xchg_single, Uwe Kleine-König
  • Re: [PATCH 0/2] spi: imx: don't loop endlessly, Sam Ravnborg
    • Re: [PATCH 0/2] spi: imx: don't loop endlessly, Uwe Kleine-König
      • Re: [PATCH 0/2] spi: imx: don't loop endlessly, Sam Ravnborg
        • Re: [PATCH 0/2] spi: imx: don't loop endlessly, Uwe Kleine-König
          • Re: [PATCH 0/2] spi: imx: don't loop endlessly, Sam Ravnborg
        • Re: [PATCH 0/2] spi: imx: don't loop endlessly, Uwe Kleine-König
  • Re: [PATCH 0/2] spi: imx: don't loop endlessly, Alexander Kurz
    • Re: [PATCH 0/2] spi: imx: don't loop endlessly, Uwe Kleine-König
• i2c_read_reg on phytec-som-am335x returns wrong data from EEPROM, Martin Hollingsworth
  • Re: i2c_read_reg on phytec-som-am335x returns wrong data from EEPROM, Ian Abbott
• [PATCH] loadxy: add missing ) to help text, Uwe Kleine-König
• [PATCH] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry, Antony Pavlov
  • Re: [PATCH] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry, Sam Ravnborg
    • [PATCH v2] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry, Antony Pavlov
      • Re: [PATCH v2] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry, Antony Pavlov
      • Re: [PATCH v2] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry, Sascha Hauer
• [PATCH v1 0/3] provide QCA AR9344 support, Oleksij Rempel
  • [PATCH v1 1/3] MIPS: ath79: provide CONFIG_SOC_QCA_AR9331 option, Oleksij Rempel
  • [PATCH v1 3/3] MIPS: ath79: add TP-Link WDR4300 board support, Oleksij Rempel
    • Re: [PATCH v1 3/3] MIPS: ath79: add TP-Link WDR4300 board support, Oleksij Rempel
  • [PATCH v1 2/3] MIPS: ath79: add initial QCA AR9344 SoC support, Oleksij Rempel
• [PATCH] ARM: imx: phyCORE i.MX7: use register defines in dcd table, Uwe Kleine-König
• [PATCH] regsubst.pl: fix typo in help text, Uwe Kleine-König
  • Re: [PATCH] regsubst.pl: fix typo in help text, Sascha Hauer
• [RFC PATCH 1/4] reset: add of_reset_control_get to header, Steffen Trumtrar
  • [RFC PATCH 4/4] fpga: add fpga-region support, Steffen Trumtrar
    • Re: [RFC PATCH 4/4] fpga: add fpga-region support, Robert Schwebel
  • [RFC PATCH 3/4] drivers: fpga: add socfpga bridges, Steffen Trumtrar
  • [RFC PATCH 2/4] drivers: add fpga bridge framework, Steffen Trumtrar
• v2017.08.0, Lucas Stach
  • Re: v2017.08.0, Uwe Kleine-König
  • Re: v2017.08.0, Sam Ravnborg
• [PATCH] ARM: i.MX7: Warp7: Add some code comments, Uwe Kleine-König
• [PATCH 1/4] ARM: imx: clocksource: Use per clock for determining parent freq, Uwe Kleine-König
  • [PATCH 2/4] ARM: imx: clocksource: error out if clk freq is 0, Uwe Kleine-König
  • [PATCH 4/4] ARM: i.MX7: drop now useless imx7s.dtsi, Uwe Kleine-König
    • Re: [PATCH 4/4] ARM: i.MX7: drop now useless imx7s.dtsi, Andrey Smirnov
  • [PATCH 3/4] ARM: imx: clocksource: make warning a bit more helpful, Uwe Kleine-König
    • Re: [PATCH 3/4] ARM: imx: clocksource: make warning a bit more helpful, Andrey Smirnov
    • [PATCH 3/4 v2] ARM: imx: clocksource: make warning a bit more helpful, Uwe Kleine-König
• [PATCH v3 00/11] i.MX7 SabreSD support, Andrey Smirnov
  • [PATCH v3 03/11] clk: i.MX7: Remove unused UART clocks array, Andrey Smirnov
  • [PATCH v3 05/11] ARM: i.MX: Add mx7_setup_pad(), Andrey Smirnov
  • [PATCH v3 02/11] gpiolib: Simplify code of gpio_request_one(), Andrey Smirnov
  • [PATCH v3 01/11] gpiolib: Fix buggy flag detection code, Andrey Smirnov
  • [PATCH v3 06/11] ARM: i.MX: Add imx7_uart_setup_ll(), Andrey Smirnov
  • [PATCH v3 08/11] ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7, Andrey Smirnov
  • [PATCH v3 09/11] ARM: i.MX: Import imx7-iomuxc-gpr.h from Linux kernel, Andrey Smirnov
  • [PATCH v3 10/11] include: Add phy-id-list.h, Andrey Smirnov
  • [PATCH v3 07/11] ARM: i.MX: Add minimal imx7-ccm-regs.h, Andrey Smirnov
  • [PATCH v3 11/11] ARM: i.MX: Add support for NXP i.MX7 SABRESD board, Andrey Smirnov
  • [PATCH v3 04/11] ARM: i.MX: Import mx7d_pins.h from U-Boot, Andrey Smirnov
  • Re: [PATCH v3 00/11] i.MX7 SabreSD support, Uwe Kleine-König
    • Re: [PATCH v3 00/11] i.MX7 SabreSD support, Andrey Smirnov
• [PATCH] Add new command fs2bridge for socfpga, Mabcded Babcde
  • Re: [PATCH] Add new command fs2bridge for socfpga, Trent Piepho
    • Re: [PATCH] Add new command fs2bridge for socfpga, Mabcded Babcde
  • Re: [PATCH] Add new command fs2bridge for socfpga, Andrey Smirnov
    • Re: [PATCH] Add new command fs2bridge for socfpga, Mabcded Babcde
      • Re: [PATCH] Add new command fs2bridge for socfpga, Andrey Smirnov
        • Re: [PATCH] Add new command fs2bridge for socfpga, Mabcded Babcde
          • Re: [PATCH] Add new command fs2bridge for socfpga, Andrey Smirnov
            • Re: [PATCH] Add new command fs2bridge for socfpga, Steffen Trumtrar
              • Re: [PATCH] Add new command fs2bridge for socfpga, Mabcded Babcde
              • Re: [PATCH] Add new command fs2bridge for socfpga, Mabcded Babcde
                • Re: [PATCH] Add new command fs2bridge for socfpga, Mabcded Babcde
                  • Re: [PATCH] Add new command fs2bridge for socfpga, Steffen Trumtrar
• [PATCH v1] MIPS: add 74Kc info, Oleksij Rempel
  • Re: [PATCH v1] MIPS: add 74Kc info, Sam Ravnborg
    • Re: [PATCH v1] MIPS: add 74Kc info, Oleksij Rempel
• [PATCH v1 1/2] of: base: port of_device_is_big_endian from linux, Oleksij Rempel
  • [PATCH v1 2/2] serial: ns16550: provide big-endian support, Oleksij Rempel
    • Re: [PATCH v1 2/2] serial: ns16550: provide big-endian support, Lucas Stach
      • Re: [PATCH v1 2/2] serial: ns16550: provide big-endian support, Oleksij Rempel
  • Re: [PATCH v1 1/2] of: base: port of_device_is_big_endian from linux, Lucas Stach
• [PATCH v2 00/11] i.MX7 SabreSD support, Andrey Smirnov
  • [PATCH v2 03/11] clk: i.MX7: Remove unused UART clocks array, Andrey Smirnov
  • [PATCH v2 01/11] gpiolib: Fix buggy flag detection code, Andrey Smirnov
  • [PATCH v2 02/11] gpiolib: Simplify code of gpio_request_one(), Andrey Smirnov
  • [PATCH v2 05/11] ARM: i.MX: Add mx7_setup_pad(), Andrey Smirnov
  • [PATCH v2 06/11] ARM: i.MX: Add imx7_uart_setup_ll(), Andrey Smirnov
  • [PATCH v2 07/11] ARM: i.MX: Add minimal imx7-ccm-regs.h, Andrey Smirnov
  • [PATCH v2 10/11] include: Add phy-id-list.h, Andrey Smirnov
  • [PATCH v2 09/11] ARM: i.MX: Import imx7-iomuxc-gpr.h from Linux kernel, Andrey Smirnov
  • [PATCH v2 08/11] ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7, Andrey Smirnov
  • [PATCH v2 11/11] ARM: i.MX: Add support for NXP i.MX7 SABRESD board, Andrey Smirnov
    • Re: [PATCH v2 11/11] ARM: i.MX: Add support for NXP i.MX7 SABRESD board, Sam Ravnborg
  • [PATCH v2 04/11] ARM: i.MX: Import mx7d_pins.h from U-Boot, Andrey Smirnov
  • Re: [PATCH v2 00/11] i.MX7 SabreSD support, Sam Ravnborg
• [PATCH v1] usb: gadget: autostart: properly release f_multi_opts, Oleksij Rempel
  • Re: [PATCH v1] usb: gadget: autostart: properly release f_multi_opts, Sascha Hauer
• [PATCH 0/9] i.MX7 SabreSD support, Andrey Smirnov
  • [PATCH 2/9] clk: i.MX7: Remove unused UART clocks array, Andrey Smirnov
  • [PATCH 5/9] ARM: i.MX: Add imx7_uart_setup_ll(), Andrey Smirnov
  • [PATCH 1/9] gpiolib: Fix buggy flag detection code, Andrey Smirnov
    • Re: [PATCH 1/9] gpiolib: Fix buggy flag detection code, Sam Ravnborg
      • Re: [PATCH 1/9] gpiolib: Fix buggy flag detection code, Andrey Smirnov
  • [PATCH 4/9] ARM: i.MX: Add mx7_setup_pad(), Andrey Smirnov
  • [PATCH 7/9] ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7, Andrey Smirnov
  • [PATCH 6/9] ARM: i.MX: Add minimal imx7-ccm-regs.h, Andrey Smirnov
  • [PATCH 8/9] ARM: i.MX: Import imx7-iomuxc-gpr.h from Linux kernel, Andrey Smirnov
  • [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board, Andrey Smirnov
    • Re: [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board, Sam Ravnborg
      • Re: [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board, Andrey Smirnov
    • Re: [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board, Stefan Lengfeld
      • Re: [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board, Andrey Smirnov
  • [PATCH 3/9] ARM: i.MX: Import mx7d_pins.h from U-Boot, Andrey Smirnov
  • Re: [PATCH 0/9] i.MX7 SabreSD support, Sam Ravnborg
    • Re: [PATCH 0/9] i.MX7 SabreSD support, Andrey Smirnov
• [PATCH] video/ssd1307fb: add support for VBAT, Bastian Stender
• Bootchooser has unexpected changes of variable 'remaining_attempts', Norbert Wiedmann
  • Re: Bootchooser has unexpected changes of variable 'remaining_attempts', Norbert Wiedmann
    • Re: Bootchooser has unexpected changes of variable 'remaining_attempts', Robert Schwebel
    • Re: Bootchooser has unexpected changes of variable 'remaining_attempts', Norbert Wiedmann
• [PATCH 1/2] ARM: i.MX7: provide DDR register definitions, Uwe Kleine-König
  • [PATCH 2/2] ARM: use register defines in the dcd table of the WaRP7, Uwe Kleine-König
  • Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions, Robert Schwebel
    • Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions, Uwe Kleine-König
      • Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions, Robert Schwebel
      • Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions, Uwe Kleine-König
    • Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions, Sam Ravnborg
      • Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions, Robert Schwebel
        • Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions, Sam Ravnborg
• [PATCH v2] scripts: Provide script that helps using cpp defines in dcd tables, Uwe Kleine-König
• [PATCH 0/6] Add DT support for at91_udc and atmel_lcdfb, Sam Ravnborg
  • [PATCH 5/6] atmel_lcdfb: move pdata init to a separate function, Sam Ravnborg
  • [PATCH 3/6] atmel_lcdfb: move lcd_wiring_mode, have_intensity_bit to local data, Sam Ravnborg
  • [PATCH 1/6] at91_udc: add DT support, Sam Ravnborg
  • [PATCH 4/6] atmel_lcdfb: define power_control gpio in platform_data, Sam Ravnborg
  • [PATCH 2/6] atmel_lcdfb: move dmacon, lcdcon2 to local data, Sam Ravnborg
  • [PATCH 6/6] atmel_lcdfb: add DT support, Sam Ravnborg
  • Re: [PATCH 0/6] Add DT support for at91_udc and atmel_lcdfb, Sascha Hauer
• Barebox state on am335x-phytec-phycore-som, Martin Hollingsworth
  • Re: Barebox state on am335x-phytec-phycore-som, Sam Ravnborg
    • Re: Barebox state on am335x-phytec-phycore-som, Çağlar Kilimci
      • AW: Barebox state on am335x-phytec-phycore-som, Martin Hollingsworth
• [PATCH 1/3] ARM: imx: kindle: select ARM_LINUX, Lucas Stach
  • [PATCH 2/3] ARM: imx: hab: depend on OFDEVICE, Lucas Stach
  • [PATCH 3/3] ARM: at91: animeo: depend on !CONSOLE_NONE, Lucas Stach
• [PATCH 0/6] assorted fixes, mainly at91 related, Sam Ravnborg
  • [PATCH 2/6] macb: fix clock probing with DT, Sam Ravnborg
  • [PATCH 1/6] arm: at91 bootstrap: declare local function static, Sam Ravnborg
  • [PATCH 5/6] mci: atmel_mci: fix devinfo DEV with OF enabled, Sam Ravnborg
  • [PATCH 3/6] clk: at91: fix clk-main, Sam Ravnborg
  • [PATCH 4/6] pinctrl: at91: move initcalls to postcore_initcall, Sam Ravnborg
  • [PATCH 6/6] atmel_lcdfb: fix so the correct guard_time is used, Sam Ravnborg
  • Re: [PATCH 0/6] assorted fixes, mainly at91 related, Lucas Stach
• [PATCH v2] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support, Lucas Stach
• [PATCH] scripts: Provide script that helps using cpp defines in dcd tables, Uwe Kleine-König
  • Re: [PATCH] scripts: Provide script that helps using cpp defines in dcd tables, Sam Ravnborg
• [PATCH 1/4] ARM: rdu2: use the upstream accepted DT, Lucas Stach
  • [PATCH 2/4] ARM: rdu2: remove USB VBUS GPIO init, Lucas Stach
  • [PATCH 3/4] ARM: rdu2: remove unecessary includes, Lucas Stach