Hi All,
I just released barebox-v2017.09.0. By now I hopefully kept up with the
mails and patches on the list. If I missed any patches or mails that
require my attention please ping me.
Also there is a stable release for August outstanding with tftp-hpa
support fixed. I'll release it shortly, but some feedback if the patches
are working as expected would be appreciated before the release.
See below for a list of patches that went into this release.
Sascha
----------------------------------------------------------------
Andrey Gusakov (10):
video: tc358767: fix EDID read for DP displays
video: tc358767: fix DP0_MISC register set
video: tc358767: fix timing calculation
video: tc358767: fix AUXDATAn registers access during write
video: tc358767: do not fail if sink supports more than 2 lanes
video: tc358767: support newer DPCD revisions and higher data rates
video: tc358767: optimize aux i2c bus checks
video: tc358767: optimize DPCD register write
video: tc358767: filter out modes with too high pixelclock
video: tc358767: accept any hsync and vsync polatiry
Andrey Smirnov (9):
clk: i.MX7: Remove unused UART clocks array
ARM: i.MX: Import mx7d_pins.h from U-Boot
ARM: i.MX: Add mx7_setup_pad()
ARM: i.MX: Add imx7_uart_setup_ll()
ARM: i.MX: Add minimal imx7-ccm-regs.h
ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7
ARM: i.MX: Import imx7-iomuxc-gpr.h from Linux kernel
include: Add phy-id-list.h
ARM: i.MX: Add support for NXP i.MX7 SABRESD board
Antony Pavlov (1):
gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry
Bastian Stender (1):
video/ssd1307fb: add support for VBAT
Ian Abbott (1):
readlink: Improve -f handling
Lucas Stach (29):
ARM: rdu2: use the upstream accepted DT
ARM: rdu2: remove USB VBUS GPIO init
ARM: rdu2: remove unecessary includes
ARM: rdu2: include defaultenv from board
ARM: imx: remove DCD files from Makefiles
ARM: imx6: move MX6UL enet setup out of CPU string setting
ARM: imx6: add static annotation to locally used functions
video: tc358767: demote ASSR enable failure to debug level
video: IPUv3-LDB: fix dual-channel mode
clk: clk-fixed-factor: remove leftover debugging
ARM: imx: kindle: select ARM_LINUX
ARM: imx: hab: depend on OFDEVICE
ARM: at91: animeo: depend on !CONSOLE_NONE
dts: update to v4.13-rc2
Merge branch 'for-next/at91'
Merge branch 'for-next/dts'
Merge branch 'for-next/efi'
Merge branch 'for-next/imx'
Merge branch 'for-next/misc'
Merge branch 'for-next/mmc'
Merge branch 'for-next/nvmem'
Merge branch 'for-next/socfpga'
Merge branch 'for-next/state'
Merge branch 'for-next/tc358767'
ARM: imx: fix phyBOARD-Zeta pinfunc typo
ARM: imx: build imx6.o as ARMv7
ARM: imx: ccmx53: select I2C
ARM: imx: add stub for imx7_uart_setup_ll
ARM: imx7: sabreSD: remove duplicate DT nodes
Oleksij Rempel (6):
nvmem: snvs_lpgpr: sync with latest version for kernel
dts: arm: imx6qdl: provide snvs-lpgpr device
ARM: riotboard: provide standby on power off option
ARM: i.MX: provide handler for power off over standby
regulator: pfuze: provide power over standby handler
MIPS: add 74Kc info
Peter Seiderer (1):
mmc: add eMMC v5 and V5.1 detection support
Philipp Zabel (2):
state: backend_bucket_circular: promote old state debug message to info
state: backend_storage: remove unreachable error message
Sam Ravnborg (6):
arm: at91 bootstrap: declare local function static
macb: fix clock probing with DT
clk: at91: fix clk-main
pinctrl: at91: move initcalls to postcore_initcall
mci: atmel_mci: fix devinfo DEV with OF enabled
atmel_lcdfb: fix so the correct guard_time is used
Sascha Hauer (7):
mmc: Consistently use EXT_CSD_* names from eMMC 5.1 spec
mmc_extcsd command: Fix multiline prints
mmc_extcsd command: rework
ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support
fs: avoid pathes with '//' in __canonicalize_path()
fs: Don't bother filesystems without link support with additional stat() calls
Release v2017.09.0
Steffen Trumtrar (11):
state: fix compile warnings for dev_err expansion
common: efi: do not use undefined kconfig option
fs: efi: return with correct error code in efifs_stat
devfs-core: add function to find cdev by partuuid
of: of_path: find device via partuuid
scripts: socfpga_get_sequencer: update importer
Documentation: socfpga: update sequencer documentation
efi: efi: load state from devicetree
blspec: skip all devicetree tests if entry doesn't specify one
efi: efi: register barebox-update handler
efi_defconfig: enable STATE
Uwe Kleine-König (9):
ARM: imx: use register defines in imxcfg files instead of plain numbers
scripts: Provide script that helps using cpp defines in dcd tables
ARM: i.MX7: provide DDR register definitions
ARM: use register defines in the dcd table of the WaRP7
ARM: imx: clocksource: Use per clock for determining parent freq
ARM: imx: clocksource: error out if clk freq is 0
ARM: imx: clocksource: make warning a bit more helpful
ARM: i.MX7: drop now useless imx7s.dtsi
ARM: i.MX7: Warp7: Add some code comments
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
