Dear all, I am struggling to get networking up and running on my Atmel at91sam9260-ek. I am trying to use an ASIX USB dongle. I got pretty far. Here is the console log: ...snip... barebox 2017.11.0-gdf1d493-dirty #50 Mon Nov 27 17:20:57 CET 2017 ...snip... Board: Atmel at91sam9260-ek AT91: Detected soc type: at91sam9260 AT91: Detected soc subtype: Unknown ...snip... usb: USB: scanning bus for devices... usb: Bus 001 Device 001: ID 0000:0000 OHCI Root Hub usb: Bus 001 Device 002: ID 0b95:7720 AX88772A mdio_bus: miibus1: probed eth1: got preset MAC address: 8c:ae:4c:eb:1f:83 usb: 2 USB Device(s) found But as soon as I start using the device eth1, the following error messages appear in the serial console and the dongle LEDs will turn dark. ping 8.8.8.8 eth1: 100Mbps full duplex link detected eth1: asix_rx_fixup() Bad Header Length 0xffffffc3, offset 4 eth1: asix_rx_fixup() Bad Header Length 0xd526003c, offset 514 eth1: asix_rx_fixup() Bad Header Length 0x97001127, offset 4 eth1: asix_rx_fixup() Bad Header Length 0xffffffc3, offset 4 T ERROR: OHCI Unrecoverable Error, controller usb-ohci disabled ERROR: sohci_submit_job failed with -32 Could anyone give me a hint, what to do? Best regards, Holger -- Holger Birkmeyer Ebee Smart Technologies GmbH Torgauer Str. 12-15 10829 Berlin Phone: +49 30 6098371-52 Mail: holger.birkmeyer@ebee.berlin
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
