From: Roland Hieber <rohieb@xxxxxxxxxxx> Kernel commit a19adf8d86e822eba502486524127595372c85f6 [0] changed the RPi1 device tree from &sdhci to &sdhost, which was imported in barebox commit d14b844b08635c717fb52a294ed8d6872e260315. It seems that barebox does not have a driver for brcm,bcm2835-sdhost (yet), which resulted in barebox unable to boot from SD card. However, the driver for brcm,bcm2835-sdhci worked fine in the past. Although the upstream change was made for good reasons, the simplest change for barebox for now is to revert to using &sdhci and disable &sdhost. Thanks to Alexander Dahl for raising this issue on the DistroKit mailing list! [0]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a19adf8d86e822eba502486524127595372c85f6 Cc: Alexander Dahl <post@xxxxxxxxxxx> Signed-off-by: Roland Hieber <rohieb@xxxxxxxxxxx> --- arch/arm/dts/bcm2835-rpi.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/dts/bcm2835-rpi.dts b/arch/arm/dts/bcm2835-rpi.dts index 0095f58a3c..ab2d6dff64 100644 --- a/arch/arm/dts/bcm2835-rpi.dts +++ b/arch/arm/dts/bcm2835-rpi.dts @@ -9,3 +9,10 @@ reg = <0x0 0x0>; }; }; +&sdhci { + status = "okay"; +}; + +&sdhost { + status = "disabled"; +}; -- 2.11.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox