On Fri, Sep 22, 2017 at 11:54:59AM +0200, Uwe Kleine-König wrote: > Since commit > > 5c1846b62524 ("ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree") > > the fec driver ensures a phy reset. As there is little use in resetting > twice, drop the reset from the board file. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> > --- > arch/arm/boards/freescale-mx53-qsb/board.c | 11 ----------- > 1 file changed, 11 deletions(-) Applied, thanks Sascha > > diff --git a/arch/arm/boards/freescale-mx53-qsb/board.c b/arch/arm/boards/freescale-mx53-qsb/board.c > index f75c9d12cd6b..0b1c927b81d4 100644 > --- a/arch/arm/boards/freescale-mx53-qsb/board.c > +++ b/arch/arm/boards/freescale-mx53-qsb/board.c > @@ -64,15 +64,6 @@ static void set_board_rev(int rev) > loco_system_rev = (loco_system_rev & ~(0xF << 8)) | (rev & 0xF) << 8; > } > > -#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) > - > -static void loco_fec_reset(void) > -{ > - gpio_direction_output(LOCO_FEC_PHY_RST, 0); > - mdelay(1); > - gpio_set_value(LOCO_FEC_PHY_RST, 1); > -} > - > #define MX53_LOCO_USB_PWREN IMX_GPIO_NR(7, 8) > > static int loco_late_init(void) > @@ -148,8 +139,6 @@ static int loco_late_init(void) > gpio_direction_output(MX53_LOCO_USB_PWREN, 0); > gpio_set_value(MX53_LOCO_USB_PWREN, 1); > > - loco_fec_reset(); > - > set_silicon_rev(imx_silicon_revision()); > > armlinux_set_architecture(MACH_TYPE_MX53_LOCO); > -- > 2.11.0 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox