[PATCH] ARM: i.MX53 QSB: drop phy reset handling in board file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since commit

	5c1846b62524 ("ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree")

the fec driver ensures a phy reset. As there is little use in resetting
twice, drop the reset from the board file.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
 arch/arm/boards/freescale-mx53-qsb/board.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/arch/arm/boards/freescale-mx53-qsb/board.c b/arch/arm/boards/freescale-mx53-qsb/board.c
index f75c9d12cd6b..0b1c927b81d4 100644
--- a/arch/arm/boards/freescale-mx53-qsb/board.c
+++ b/arch/arm/boards/freescale-mx53-qsb/board.c
@@ -64,15 +64,6 @@ static void set_board_rev(int rev)
 	loco_system_rev =  (loco_system_rev & ~(0xF << 8)) | (rev & 0xF) << 8;
 }
 
-#define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-
-static void loco_fec_reset(void)
-{
-	gpio_direction_output(LOCO_FEC_PHY_RST, 0);
-	mdelay(1);
-	gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
 #define MX53_LOCO_USB_PWREN		IMX_GPIO_NR(7, 8)
 
 static int loco_late_init(void)
@@ -148,8 +139,6 @@ static int loco_late_init(void)
 	gpio_direction_output(MX53_LOCO_USB_PWREN, 0);
 	gpio_set_value(MX53_LOCO_USB_PWREN, 1);
 
-	loco_fec_reset();
-
 	set_silicon_rev(imx_silicon_revision());
 
 	armlinux_set_architecture(MACH_TYPE_MX53_LOCO);
-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux