On Wed, Sep 06, 2017 at 04:27:37PM +0200, Oleksij Rempel wrote: > From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> > > Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> > --- > Documentation/boards/efi.rst | 2 ++ > Documentation/boards/ibase-mi991af.rst | 43 ++++++++++++++++++++++++++++++++++ > 2 files changed, 45 insertions(+) > create mode 100644 Documentation/boards/ibase-mi991af.rst Applied, thanks Sascha > > diff --git a/Documentation/boards/efi.rst b/Documentation/boards/efi.rst > index 6c90e6cdf..f59bb1d5b 100644 > --- a/Documentation/boards/efi.rst > +++ b/Documentation/boards/efi.rst > @@ -1,3 +1,5 @@ > +.. _barebox_on_uefi: > + > barebox on (U)EFI > ================= > > diff --git a/Documentation/boards/ibase-mi991af.rst b/Documentation/boards/ibase-mi991af.rst > new file mode 100644 > index 000000000..a22e5fcf7 > --- /dev/null > +++ b/Documentation/boards/ibase-mi991af.rst > @@ -0,0 +1,43 @@ > +iBASE MI991AF > +============= > + > +The iBASE MI991AF Mini-ITX motherboard has > + > + * 7th/6th Generation Intel® Xeon® E3 / Core™ i7 / i5 /i3 / Pentium® / Celeron® QC/DC processors, up to 4GHz > + * 2x DDR4 SO-DIMM, Max. 32GB, ECC compatible > + * Intel® Processor integrated graphics device, supports DVI-D, HDMI and DisplayPort > + * Dual Intel® Gigabit LAN > + * 2x USB 2.0, 6x USB 3.0, 4x COM, 4x SATAIII > + * 2x Mini PCI-E slots, 1x mSATA, 1x PCI-E(x16) > + * Watchdog timer, Digital I/O, iAMT (11.0), TPM (1.2), iSMART > + > +Running barebox > +--------------- > + > +Building the barebox image for this target is covered by the ``efi_defconfig`` > + > +BIOS should be configured as follow: > + > + * When you turn on the computer, the BIOS is immediately activated. Pressing > + the <Del> key immediately allows you to enter the BIOS Setup utility. If you are > + a little bit late pressing the <Del> key, POST (Power On Self Test) will > + continue with its test routines, thus preventing you from invoking the Setup. > + In this case restart the system by pressing the ”Reset” button or simultaneously > + pressing the <Ctrl>, <Alt> and <Delete> keys. You can also restart by turning the > + system Off and back On again. > + * Reset BIOS settings. With this step we wont to make sure BIOS has defined common state to avoid > + undocumented issues. Switch to "Save & Exit" tab, choice "Restore Defaults" > + and press Enter. Answer "Yes" and press Enter again. Then choice "Save Changes and Exit" > + and press Enter. > + * Enable UEFI support. Switch to "Boot" tab. Choice "Boot mode select" and set it to "UEFI". > + Switch in the "Save & Exit" tab to "Save Changes and Exit" and press Enter. > + > +To make network work in barebox you will need to prepare efi binary network drivers and put them in to > +"network-drivers" directory. > + > +To continue please proceed with barebox :ref:`barebox_on_uefi` documentation. > + > +Links > +----- > + > + * https://www.ibase.com.tw/english/ProductDetail/EmbeddedComputing/MI991 > -- > 2.11.0 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
