U-Boot V2 Development (Barebox)

• Date Index

• [PATCH v2] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support, Lucas Stach
• [PATCH] scripts: Provide script that helps using cpp defines in dcd tables, Uwe Kleine-König
  • Re: [PATCH] scripts: Provide script that helps using cpp defines in dcd tables, Sam Ravnborg
• [PATCH 1/4] ARM: rdu2: use the upstream accepted DT, Lucas Stach
  • [PATCH 2/4] ARM: rdu2: remove USB VBUS GPIO init, Lucas Stach
  • [PATCH 3/4] ARM: rdu2: remove unecessary includes, Lucas Stach
  • [PATCH 4/4] ARM: rdu2: include defaultenv from board, Lucas Stach
    • Re: [PATCH 4/4] ARM: rdu2: include defaultenv from board, Sam Ravnborg
• [PATCH 1/3] video: tc358767: demote ASSR enable failure to debug level, Lucas Stach
  • [PATCH 3/3] clk: clk-fixed-factor: remove leftover debugging, Lucas Stach
  • [PATCH 2/3] video: IPUv3-LDB: fix dual-channel mode, Lucas Stach
• [PATCH] state: backend_bucket_circular: promote old state debug message to info, Philipp Zabel
• [PATCH] state: backend_storage: remove unreachable error message, Philipp Zabel
• [PATCH] state: backend_bucket_circular: fix old state reads, Philipp Zabel
• stable release v2017.05.4, v2017.06.2, v2017.07.1, Lucas Stach
  • Re: stable release v2017.05.4, v2017.06.2, v2017.07.1, Michael Olbrich
• how to make barebox supports pcf font format support, Kevin Du Huanpeng
• [PATCH v1] crypto: caam: use dma_alloc_coherent instead of dma_alloc, Oleksij Rempel
  • Re: [PATCH v1] crypto: caam: use dma_alloc_coherent instead of dma_alloc, Robert Schwebel
  • <Possible follow-ups>
  • [PATCH v1] crypto: caam: use dma_alloc_coherent instead of dma_alloc, Oleksij Rempel
    • [PATCH v2] crypto: caam: use dma_alloc_coherent instead of dma_alloc, Oleksij Rempel
      • Re: [PATCH v2] crypto: caam: use dma_alloc_coherent instead of dma_alloc, Lucas Stach
    • Re: [PATCH v1] crypto: caam: use dma_alloc_coherent instead of dma_alloc, Oleksij Rempel
• [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit, Philipp Zabel
  • Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit, Andrey Smirnov
    • Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit, Lucas Stach
      • Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit, Philipp Zabel
        • Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit, Philipp Zabel
  • Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit, Lucas Stach
• [PATCH 1/2] ARM: imx6: move MX6UL enet setup out of CPU string setting, Lucas Stach
  • [PATCH 2/2] ARM: imx6: add static annotation locally used functions, Lucas Stach
• [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support, Lucas Stach
  • Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support, Sam Ravnborg
    • Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support, Lucas Stach
      • Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support, Sam Ravnborg
  • Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support, Sam Ravnborg
  • Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support, Stefan Lengfeld
    • Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support, Lucas Stach
• [PATCH v2 1/9] state: fix compile warnings for dev_err expansion, Steffen Trumtrar
  • [PATCH v2 8/9] efi: efi: register barebox-update handler, Steffen Trumtrar
  • [PATCH v2 2/9] common: efi: do not use undefined kconfig option, Steffen Trumtrar
  • [PATCH v2 7/9] blspec: skip all devicetree tests if entry doesn't specify one, Steffen Trumtrar
  • [PATCH v2 9/9] efi_defconfig: enable STATE, Steffen Trumtrar
  • [PATCH v2 4/9] devfs-core: add function to find cdev by partuuid, Steffen Trumtrar
  • [PATCH v2 3/9] fs: efi: return with correct error code in efifs_stat, Steffen Trumtrar
  • [PATCH v2 5/9] of: of_path: find device via partuuid, Steffen Trumtrar
  • [PATCH v2 6/9] efi: efi: load state from devicetree, Steffen Trumtrar
    • Re: [PATCH v2 6/9] efi: efi: load state from devicetree, Lucas Stach
      • Re: [PATCH v2 6/9] efi: efi: load state from devicetree, Lucas Stach
• [PATCH] gpio: move active state function stubs to GPIOLIB, Lucas Stach
• [PATCH] ARM: imx: remove DCD files from Makefiles, Lucas Stach
  • Re: [PATCH] ARM: imx: remove DCD files from Makefiles, Sascha Hauer
    • Re: [PATCH] ARM: imx: remove DCD files from Makefiles, Sam Ravnborg
      • Re: [PATCH] ARM: imx: remove DCD files from Makefiles, Sam Ravnborg
• Next step to enable DT support for at91sam9263ek?, Sam Ravnborg
  • Re: Next step to enable DT support for at91sam9263ek?, Lucas Stach
• [PATCH 2/2] at91sam9263ek: enable multi-image build, Sam Ravnborg
  • Re: [PATCH 2/2] at91sam9263ek: enable multi-image build, Sam Ravnborg
• [PATCH 1/2] at91: sync mach/barebox-arm-head.h, Sam Ravnborg
  • Re: [PATCH 1/2] at91: sync mach/barebox-arm-head.h, Sascha Hauer
• [PATCH v2 0/23] at91: move reset vector to board code, Sam Ravnborg
  • [PATCH 02/23] at91: drop unused at91sam9x5_lowlevel_init.c, Sam Ravnborg
  • [PATCH 05/23] pm9261: move reset vector to board code, Sam Ravnborg
  • [PATCH 04/23] at91sam9261ek, at91sam9g10ek: move reset vector to board code, Sam Ravnborg
  • [PATCH 03/23] at91sam9263ek: move reset vector to board code, Sam Ravnborg
  • [PATCH 01/23] at91: refactor lowlevel_init selection, Sam Ravnborg
  • [PATCH 06/23] at91: drop unused at91sam9261_lowlevel_init, Sam Ravnborg
  • [PATCH 09/23] usb-a926x: move reset vector to board code, Sam Ravnborg
  • [PATCH 13/23] haba-knx: move reset vector to board code, Sam Ravnborg
  • [PATCH 07/23] mmccpu: move reset vector to board code, Sam Ravnborg
  • [PATCH 10/23] at91: delete at91sam926x_lowlevel_init, Sam Ravnborg
  • [PATCH 15/23] sama5d{3, 4}{xek, xplained}: move reset vector to board code, Sam Ravnborg
  • [PATCH 11/23] tny-a926x: move reset vector to board code, Sam Ravnborg
  • [PATCH 17/23] at91rm9200ek: move reset vector to board code, Sam Ravnborg
  • [PATCH 16/23] at91sam{9260, 9G20, 9m10g45, 9n12}ek: move reset vector to board code, Sam Ravnborg
  • [PATCH 20/23] animeo: move reset vector to board code, Sam Ravnborg
  • [PATCH 21/23] dss11: move reset vector to board code, Sam Ravnborg
  • [PATCH 18/23] at91sam9m10ihd: move reset vector to board code, Sam Ravnborg
  • [PATCH 19/23] pm9g45: move reset vector to board code, Sam Ravnborg
  • [PATCH 23/23] at91: remove leftovers from reset code in mach-at91, Sam Ravnborg
  • [PATCH 22/23] telit-evk-pro3: move reset vector to board code, Sam Ravnborg
  • [PATCH 12/23] qil-a926x: move reset vector to board code, Sam Ravnborg
  • [PATCH 14/23] at91: delete unused at91sam9263_lowlevel_init.c, Sam Ravnborg
  • [PATCH 08/23] pm9263: move reset vector to board code, Sam Ravnborg
  • Re: [PATCH v2 0/23] at91: move reset vector to board code, Lucas Stach
    • Re: [PATCH v2 0/23] at91: move reset vector to board code, Sam Ravnborg
• New status of your UPS delivery (code: 007329866), webnl
• [PATCH v2 0/3] make power off work on iMX6S RIoTBoard, Oleksij Rempel
  • [PATCH v2 3/3] regulator: pfuze: provide power over standby handler, Oleksij Rempel
  • [PATCH v2 2/3] ARM: i.MX: provide handler for power off over standby, Oleksij Rempel
  • [PATCH v2 1/3] ARM: riotboard: provide standby on power off option, Oleksij Rempel
  • Re: [PATCH v2 0/3] make power off work on iMX6S RIoTBoard, Lucas Stach
• [PATCH] crypto: digest: Fix digesting over memory chunks > 4096 bytes, Uwe Kleine-König
  • Re: [PATCH] crypto: digest: Fix digesting over memory chunks > 4096 bytes, Lucas Stach
• [PATCH 1/2] scripts: socfpga_get_sequencer: update importer, Steffen Trumtrar
  • [PATCH 2/2] Documentation: socfpga: update sequencer documentation, Steffen Trumtrar
  • Re: [PATCH 1/2] scripts: socfpga_get_sequencer: update importer, Lucas Stach
• [PATCH v1 1/3] ARM: riotboard: provide standby on power off option, Oleksij Rempel
  • [PATCH v1 2/3] ARM: i.MX: provide handler for power off over standby, Oleksij Rempel
  • [PATCH v1 3/3] regulator: pfuze: provide power over standby handler, Oleksij Rempel
    • Re: [PATCH v1 3/3] regulator: pfuze: provide power over standby handler, Lucas Stach
      • Re: [PATCH v1 3/3] regulator: pfuze: provide power over standby handler, Oleksij Rempel
• [RFC PATCH 0/5] at91: move reset vector to board code, Sam Ravnborg
  • [PATCH 1/5] at91: refactor lowlevel_init selection, Sam Ravnborg
  • [PATCH 2/5] at91: drop unused at91sam9x5_lowlevel_init.c, Sam Ravnborg
  • [PATCH 3/5] at91sam9263ek: move reset vector to board code, Sam Ravnborg
  • [PATCH 4/5] at91sam9261ek, at91sam9g10ek: move reset vector to board code, Sam Ravnborg
  • [PATCH 5/5] pm9261: move reset vector to board code, Sam Ravnborg
• [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers, Uwe Kleine-König
  • Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers, Lucas Stach
    • Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers, Uwe Kleine-König
      • Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers, Lucas Stach
        • Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers, Uwe Kleine-König
  • Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers, Lucas Stach
• [PATCH v2 0/3] diverse at91 related fixes, Sam Ravnborg
  • [PATCH 1/3] clk: fix clk_get error handling, Sam Ravnborg
  • [PATCH 2/3] gpio: fix null pointer exception when there is no oftree, Sam Ravnborg
    • Re: [PATCH 2/3] gpio: fix null pointer exception when there is no oftree, Lucas Stach
      • Re: [PATCH 2/3] gpio: fix null pointer exception when there is no oftree, Alexander Kurz
        • Re: [PATCH 2/3] gpio: fix null pointer exception when there is no oftree, Lucas Stach
  • [PATCH 3/3] arm: at91 bootstrap: declare local function static, Sam Ravnborg
• [PATCH v1 00/10] video: tc358767: fixes and improvements, Andrey Gusakov
  • [PATCH v1 01/10] video: tc358767: fix EDID read for DP displays, Andrey Gusakov
  • [PATCH v1 05/10] video: tc358767: do not fail if sink supports more than 2 lanes, Andrey Gusakov
  • [PATCH v1 02/10] video: tc358767: fix DP0_MISC register set, Andrey Gusakov
  • [PATCH v1 07/10] video: tc358767: optimize aux i2c bus checks, Andrey Gusakov
  • [PATCH v1 04/10] video: tc358767: fix AUXDATAn registers access during write, Andrey Gusakov
  • [PATCH v1 03/10] video: tc358767: fix timing calculation, Andrey Gusakov
  • [PATCH v1 06/10] video: tc358767: support newer DPCD revisions and higher data rates, Andrey Gusakov
  • [PATCH v1 09/10] video: tc358767: filter out modes with too high pixelclock, Andrey Gusakov
  • [PATCH v1 08/10] video: tc358767: optimize DPCD register write, Andrey Gusakov
  • [PATCH v1 10/10] video: tc358767: accept any hsync and vsync polatiry, Andrey Gusakov
  • Re: [PATCH v1 00/10] video: tc358767: fixes and improvements, Lucas Stach
• [PATCH v2 0/2] update snvs_lpgpr driver, Oleksij Rempel
  • [PATCH v2 2/2] dts: arm: imx6qdl: provide snvs-lpgpr device, Oleksij Rempel
  • [PATCH v2 1/2] nvmem: snvs_lpgpr: sync with latest version for kernel, Oleksij Rempel
  • Re: [PATCH v2 0/2] update snvs_lpgpr driver, Lucas Stach
• Earliest possible GPIO toggle on i.mx6, Mayur Nande
  • Re: Earliest possible GPIO toggle on i.mx6, Lucas Stach
    • RE: Earliest possible GPIO toggle on i.mx6, Mayur Nande
      • RE: Earliest possible GPIO toggle on i.mx6, Mayur Nande
• Bootchooser - remaining_attempts, Çağlar Kilimci
  • Re: Bootchooser - remaining_attempts, Çağlar Kilimci
    • AW: Bootchooser - remaining_attempts, Martin Hollingsworth
      • Re: Bootchooser - remaining_attempts, Çağlar Kilimci
  • Re: Bootchooser - remaining_attempts, B Gol
• [PATCH 1/8] state: fix compile warnings for dev_err expansion, Steffen Trumtrar
  • [PATCH 4/8] devfs-core: add function to find cdev by partuuid, Steffen Trumtrar
  • [PATCH 7/8] blspec: skip all devicetree tests if entry doesn't specify one, Steffen Trumtrar
  • [PATCH 5/8] of: of_path: find device via partuuid, Steffen Trumtrar
  • [PATCH 3/8] fs: efi: return with correct error code in efifs_stat, Steffen Trumtrar
  • [PATCH 2/8] common: efi: do not use undefined kconfig option, Steffen Trumtrar
    • Re: [PATCH 2/8] common: efi: do not use undefined kconfig option, Lucas Stach
      • Re: [PATCH 2/8] common: efi: do not use undefined kconfig option, Michael Olbrich
  • [PATCH 8/8] efi: efi: register barebox-update handler, Steffen Trumtrar
  • [PATCH 6/8] efi: efi: load state from devicetree, Steffen Trumtrar
    • Re: [PATCH 6/8] efi: efi: load state from devicetree, Lucas Stach
• [PATCH v1 1/2] nvmem: snvs_lpgpr: sync with latest version for kernel, Oleksij Rempel
  • [PATCH v1 2/2] dts: arm: imx6qdl: provide snvs-lpgpr device, Oleksij Rempel
    • Re: [PATCH v1 2/2] dts: arm: imx6qdl: provide snvs-lpgpr device, Lucas Stach
  • Re: [PATCH v1 1/2] nvmem: snvs_lpgpr: sync with latest version for kernel, Lucas Stach
• Observations with AT91SAM9263-EK, Sam Ravnborg
  • Re: Observations with AT91SAM9263-EK, Jean-Christophe PLAGNIOL-VILLARD
    • Re: Observations with AT91SAM9263-EK, Sam Ravnborg
  • [PATCH 1/2] clk: fix clk_get error handling, Sam Ravnborg
    • Re: [PATCH 1/2] clk: fix clk_get error handling, Uwe Kleine-König
      • Re: [PATCH 1/2] clk: fix clk_get error handling, Sam Ravnborg
  • [PATCH 2/2] gpio: fix null pointer exception when there is no oftree, Sam Ravnborg
• [PATCH] readlink: Improve -f handling, Ian Abbott
  • Re: [PATCH] readlink: Improve -f handling, Lucas Stach
• Barebox Environment and State placed on eMMC boot partition, Martin Hollingsworth
• [PATCH] Revert "param: fix stub prototype of dev_add_param", Lucas Stach
• [PATCH] gpiolib: fix: do not access oftree on non-OFDEVICE boards, Alexander Kurz
  • Re: [PATCH] gpiolib: fix: do not access oftree on non-OFDEVICE boards, Lucas Stach
    • Re: [PATCH] gpiolib: fix: do not access oftree on non-OFDEVICE boards, Alexander Kurz
      • Re: [PATCH] gpiolib: fix: do not access oftree on non-OFDEVICE boards, Sam Ravnborg
• [BUG v2017.07.0] readlink -f command broken?, Ian Abbott
  • Re: [BUG v2017.07.0] readlink -f command broken?, Jean-Christophe PLAGNIOL-VILLARD
  • Re: [BUG v2017.07.0] readlink -f command broken?, Sascha Hauer
• v2017.07.0, Sascha Hauer
  • Re: v2017.07.0, Antony Pavlov
    • Re: v2017.07.0, Ian Abbott
• [PATCH 0/8] video: tc358767: fixes and improvements, Andrey Gusakov
  • [PATCH 1/8] video: tc358767: do not fail if sink supports more than 2 lanes, Andrey Gusakov
  • [PATCH 2/8] video: tc358767: support newer DPCD revisions and higher data rates, Andrey Gusakov
  • [PATCH 3/8] video: tc358767: fix EDID read for DP displays, Andrey Gusakov
  • [PATCH 4/8] video: tc358767: fix DP0_MISC register set, Andrey Gusakov
  • [PATCH 6/8] video: tc358767: fix AUXDATAn registers access, Andrey Gusakov
    • Re: [PATCH 6/8] video: tc358767: fix AUXDATAn registers access, Lucas Stach
  • [PATCH 5/8] video: tc358767: fix timing calculation, Andrey Gusakov
    • Re: [PATCH 5/8] video: tc358767: fix timing calculation, Lucas Stach
  • [PATCH 7/8] video: tc358767: filter out modes with too high pixelclock, Andrey Gusakov
  • [PATCH 8/8] video: tc358767: accept any hsync and vsync polatiry, Andrey Gusakov
  • Re: [PATCH 0/8] video: tc358767: fixes and improvements, Lucas Stach
• [PATCH 1/2] scripts/kwboot: document -n option, Uwe Kleine-König
  • [PATCH 2/2] docs: mvebu: describe -n more accurately in the sphinx document, Uwe Kleine-König
  • Re: [PATCH 1/2] scripts/kwboot: document -n option, Sascha Hauer
• [PATCH] ARM: socfpga: remove unused fpgaintf setup, Steffen Trumtrar
  • Re: [PATCH] ARM: socfpga: remove unused fpgaintf setup, Sascha Hauer
• [PATCH] enable LFS support for host programs, Uwe Kleine-König
  • Re: [PATCH] enable LFS support for host programs, Sascha Hauer
• arria10_init_emac() bug?, Ian Abbott
  • Re: arria10_init_emac() bug?, Steffen Trumtrar
• [PATCH] ARM: imx: add support for Udoo Neo full, Uwe Kleine-König
  • Re: [PATCH] ARM: imx: add support for Udoo Neo full, Stefan Lengfeld
    • Re: [PATCH] ARM: imx: add support for Udoo Neo full, Uwe Kleine-König
    • Re: [PATCH] ARM: imx: add support for Udoo Neo full, Sascha Hauer
      • Re: [PATCH] ARM: imx: add support for Udoo Neo full, Uwe Kleine-König
        • Re: [PATCH] ARM: imx: add support for Udoo Neo full, Sascha Hauer
  • Re: [PATCH] ARM: imx: add support for Udoo Neo full, Andrey Smirnov
• [PATCH v6] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
  • Re: [PATCH v6] arm: boards: phytec-som-am335x: Update boot scripts, Sascha Hauer
• [PATCH] fs: Make locally used function canonicalize_dir() static, Sascha Hauer
• [PATCH] ARM: omap: Fix error printing, Sascha Hauer
• [PATCH] ARM: omap: phytec-phycore-omap4460: Fix compiler warning, Sascha Hauer
• [PATCH] pinctrl: at91: Bail out if atmel, pins property does not exist, Sascha Hauer
• [PATCH] ARM: dts: i.MX6: fix usdhc3 pinmuxing on tqma6x, Michael Tretter
  • Re: [PATCH] ARM: dts: i.MX6: fix usdhc3 pinmuxing on tqma6x, Sascha Hauer
• [DT-UTILS PATCH 1/2] common: Rename strlcpy to DT_strlcpy, Marcin Niestroj
  • [DT-UTILS PATCH 2/2] common: Include sys/types.h header, Marcin Niestroj
  • Re: [DT-UTILS PATCH 1/2] common: Rename strlcpy to DT_strlcpy, Sascha Hauer
• [PATCH v2 00/16] RATP logic fixes and improvements, Aleksander Morgado
  • [PATCH v2 03/16] ratp: send missing RST in behavior C2, Aleksander Morgado
  • [PATCH v2 01/16] ratp: add missing transition to SYN-RECEIVED in behavior B, Aleksander Morgado
  • [PATCH v2 02/16] ratp: avoid unnecessary variable initializations, Aleksander Morgado
  • [PATCH v2 04/16] ratp: add missing RST flag in behavior G, Aleksander Morgado
  • [PATCH v2 07/16] ratp: fix single byte sending flagged with SO, Aleksander Morgado
  • [PATCH v2 06/16] ratp: fix data presence check, Aleksander Morgado
  • [PATCH v2 05/16] ratp: completely ignore RST flagged packets in behavior G, Aleksander Morgado
  • [PATCH v2 11/16] ratp: consolidate ratp_sn_expected() and ratp_an_expected(), Aleksander Morgado
  • [PATCH v2 08/16] ratp: remove bogus data checks in behavior C2, Aleksander Morgado
  • [PATCH v2 10/16] ratp: fix sending ACKs without data, Aleksander Morgado
  • [PATCH v2 12/16] ratp: prefer using ratp_send_ack() in behaviour I1, Aleksander Morgado
  • [PATCH v2 09/16] ratp: remove FIXME comment: FIN always requires ACK, Aleksander Morgado
  • [PATCH v2 15/16] ratp: consolidate setting the next AN or SN flags, Aleksander Morgado
  • [PATCH v2 13/16] ratp: send initial data in behaviour B if any pending, Aleksander Morgado
  • [PATCH v2 14/16] ratp: don't ignore data that may arrive in behaviour H1, Aleksander Morgado
  • [PATCH v2 16/16] ratp: user close may happen in SYN-RECEIVED state, Aleksander Morgado
  • Re: [PATCH v2 00/16] RATP logic fixes and improvements, Sascha Hauer
• [PATCH v2] lib/fonts: add 6x8 font, Roland Hieber
  • Re: [PATCH v2] lib/fonts: add 6x8 font, Sascha Hauer
• [PATCH] lib/fonts: add 6x8 font, Bastian Stender
• [PATCH v5] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
  • Re: [PATCH v5] arm: boards: phytec-som-am335x: Update boot scripts, Sascha Hauer
    • Re: [PATCH v5] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
      • Re: [PATCH v5] arm: boards: phytec-som-am335x: Update boot scripts, Sascha Hauer
• [PATCH 0/6] Backport support for "extended device ID" for dataflash, Andrey Smirnov
  • [PATCH 2/6] mtd: dataflash: Improve coding style in jedec_probe(), Andrey Smirnov
  • [PATCH 1/6] mtd: dataflash: Replace C99 types with their kernel counterparts, Andrey Smirnov
  • [PATCH 4/6] mtd: dataflash: Get rid of loop counter in jedec_probe(), Andrey Smirnov
  • [PATCH 3/6] mtd: dataflash: Replace pr_debug, printk with dev_* functions, Andrey Smirnov
  • [PATCH 5/6] mtd: dataflash: Make use of "extened device information", Andrey Smirnov
  • [PATCH 6/6] mtd: dataflash: Add flash_info for AT45DB641E, Andrey Smirnov
  • Re: [PATCH 0/6] Backport support for "extended device ID" for dataflash, Sascha Hauer
• [PATCH 0/3] Fix "i.MX: vf610: Ramp CPU clock to maximum frequency", Andrey Smirnov
  • [PATCH 3/3] i.MX: clk: Remove imx_clk_pllv3_locked(), Andrey Smirnov
  • [PATCH 2/3] i.MX: clk-pllv3: Do not touch PLL_BYPASS bit, Andrey Smirnov
  • [PATCH 1/3] clk-vf610: Mark all of CCSR muxes with CLK_OPS_PARENT_ENABLE, Andrey Smirnov
  • Re: [PATCH 0/3] Fix "i.MX: vf610: Ramp CPU clock to maximum frequency", Sascha Hauer
    • Re: [PATCH 0/3] Fix "i.MX: vf610: Ramp CPU clock to maximum frequency", Andrey Smirnov
      • Re: [PATCH 0/3] Fix "i.MX: vf610: Ramp CPU clock to maximum frequency", Sascha Hauer
• [PATCH] ARM: Update zii_vf610_dev_defconfig, Andrey Smirnov
  • Re: [PATCH] ARM: Update zii_vf610_dev_defconfig, Sascha Hauer
• libratp, libratp-barebox and ratp-barebox-cli, Aleksander Morgado
• [PATCH 00/16] RATP logic fixes and improvements, Aleksander Morgado
  • [PATCH 04/16] ratp: add missing RST flag in behavior G, Aleksander Morgado
  • [PATCH 01/16] ratp: add missing transition to SYN-RECEIVED in behavior B, Aleksander Morgado
  • [PATCH 05/16] ratp: completely ignore RST flagged packets in behavior G, Aleksander Morgado
  • [PATCH 03/16] ratp: send missing RST in behavior C2, Aleksander Morgado
  • [PATCH 02/16] ratp: avoid unnecessary variable initializations, Aleksander Morgado
  • [PATCH 06/16] ratp: fix data presence check, Aleksander Morgado
  • [PATCH 08/16] ratp: remove bogus data checks in behavior C2, Aleksander Morgado
  • [PATCH 11/16] ratp: consolidate ratp_sn_expected() and ratp_an_expected(), Aleksander Morgado
  • [PATCH 10/16] ratp: fix sending ACKs without data, Aleksander Morgado
  • [PATCH 09/16] ratp: remove FIXME comment: FIN always requires ACK, Aleksander Morgado
  • [PATCH 07/16] ratp: fix single byte sending flagged with SO, Aleksander Morgado
  • [PATCH 14/16] ratp: don't ignore data that may arrive in behaviour H1, Aleksander Morgado
  • [PATCH 12/16] ratp: prefer using ratp_send_ack() in behaviour I1, Aleksander Morgado
  • [PATCH 13/16] ratp: send initial data in behaviour B if any pending, Aleksander Morgado
  • [PATCH 15/16] ratp: consolidate setting the next AN or SN flags, Aleksander Morgado
  • [PATCH 16/16] ratp: user close may happen in SYN-RECEIVED state, Aleksander Morgado
  • Re: [PATCH 00/16] RATP logic fixes and improvements, Sascha Hauer
    • Re: [PATCH 00/16] RATP logic fixes and improvements, Aleksander Morgado
      • Re: [PATCH 00/16] RATP logic fixes and improvements, Sascha Hauer
• [PATCH 1/3] ARM: mvebu: initial support for Armada 38x, Uwe Kleine-König
  • [PATCH 2/3] clk: mvebu: Add support for Armada 38x's coreclk, Uwe Kleine-König
  • [PATCH 3/3] ARM: mvebu: Add initial support for Turris Omnia, Uwe Kleine-König
    • [PATCH v2 3/3] ARM: mvebu: Add initial support for Turris Omnia, Uwe Kleine-König
  • Re: [PATCH 1/3] ARM: mvebu: initial support for Armada 38x, Sascha Hauer
• [PATCH] mtd: spi-nor: sync definition of Spansion chips from Linux, Uwe Kleine-König
  • Re: [PATCH] mtd: spi-nor: sync definition of Spansion chips from Linux, Sascha Hauer
• [PATCH 1/2] of_device_is_stdout_path: simplify, Uwe Kleine-König
  • [PATCH 2/2] of_device_is_stdout_path: split off options and support aliases, Uwe Kleine-König
    • Re: [PATCH 2/2] of_device_is_stdout_path: split off options and support aliases, Sascha Hauer
    • [PATCH v2 2/2] of_device_is_stdout_path: split off options and support aliases, Uwe Kleine-König
  • Re: [PATCH 1/2] of_device_is_stdout_path: simplify, Sascha Hauer
• [PATCH] ARM: Initial OP-TEE support, Sascha Hauer
• revert nvvar changes, Sascha Hauer
  • [PATCH 3/8] Revert "globalvar: make nv_device static", Sascha Hauer
  • [PATCH 7/8] Revert "globalvar: remove code for unqualified globalvars", Sascha Hauer
  • [PATCH 1/8] Revert "globalvar: Fix value of new globalvar when nvvar exists", Sascha Hauer
  • [PATCH 8/8] Revert "nv: Do not create globalvars from nvvars", Sascha Hauer
  • [PATCH 5/8] Revert "param: remove unnecessary device_d * argument", Sascha Hauer
  • [PATCH 4/8] Revert "globalvar: don't use nv_device if CONFIG_NVVAR is disabled", Sascha Hauer
  • [PATCH 6/8] Revert "globalvar: make globalvar functions more consistent", Sascha Hauer
  • [PATCH 2/8] Revert "nv: Fix setting of nv.dev.<devname>.<param> variables", Sascha Hauer
• [PATCH] scripts/kwbimage: support empty binary.0 files, Uwe Kleine-König
  • Re: [PATCH] scripts/kwbimage: support empty binary.0 files, Sascha Hauer
• [PATCH] serial: ns16550: emit an error message if getting the clock fails, Uwe Kleine-König
  • Re: [PATCH] serial: ns16550: emit an error message if getting the clock fails, Sascha Hauer
• [PATCH] clk: let clk_get return errors from of_clk_get_by_name, Uwe Kleine-König
  • Re: [PATCH] clk: let clk_get return errors from of_clk_get_by_name, Sascha Hauer
• [PATCH] pci: mvebu: terminate error message with a newline, Uwe Kleine-König
  • Re: [PATCH] pci: mvebu: terminate error message with a newline, Sascha Hauer
• [PATCH] defaultenv: bin: init: Add sourcing of config-expansions, Daniel Schultz
  • Re: [PATCH] defaultenv: bin: init: Add sourcing of config-expansions, Sascha Hauer
    • Re: [PATCH] defaultenv: bin: init: Add sourcing of config-expansions, Daniel Schultz
      • Re: [PATCH] defaultenv: bin: init: Add sourcing of config-expansions, Sascha Hauer
        • Re: [PATCH] defaultenv: bin: init: Add sourcing of config-expansions, Daniel Schultz
• [PATCH v4] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
  • Re: [PATCH v4] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
  • Re: [PATCH v4] arm: boards: phytec-som-am335x: Update boot scripts, Sascha Hauer
    • Re: [PATCH v4] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
• v2017.06.0, Sascha Hauer
  • Re: v2017.06.0, Ian Abbott
    • Re: v2017.06.0, Ian Abbott
      • Re: v2017.06.0, Ian Abbott
        • Re: v2017.06.0, Sascha Hauer
          • Re: v2017.06.0, Ian Abbott
• [PATCH] ARM: mvebu: fix size mask for RAM window, Uwe Kleine-König
  • Re: [PATCH] ARM: mvebu: fix size mask for RAM window, Sascha Hauer
• [PATCH] Documentation: improve network boot section, Roland Hieber
  • Re: [PATCH] Documentation: improve network boot section, Sascha Hauer
• [PATCH] watchdog: i.MX: fix i.MX6 reset, Christian Hemp
  • Re: [PATCH] watchdog: i.MX: fix i.MX6 reset, Sascha Hauer
• How to use eMMC/SD DOS partitions as backend for the state framework?, B Gol
  • Re: How to use eMMC/SD DOS partitions as backend for the state framework?, Sascha Hauer
  • <Possible follow-ups>
  • Re: How to use eMMC/SD DOS partitions as backend for the state framework?, B Gol
• [PATCH v1 1/1] gpio: of: provide option generic property for initial line states, Oleksij Rempel
  • Re: [PATCH v1 1/1] gpio: of: provide option generic property for initial line states, Rob Herring
    • Re: [PATCH v1 1/1] gpio: of: provide option generic property for initial line states, Oleksij Rempel
      • Re: [PATCH v1 1/1] gpio: of: provide option generic property for initial line states, Vladimir Zapolskiy
        • Re: [PATCH v1 1/1] gpio: of: provide option generic property for initial line states, Oleksij Rempel
          • Re: [PATCH v1 1/1] gpio: of: provide option generic property for initial line states, Vladimir Zapolskiy
• [PATCH 1/2] mtd: nand_omap_gpmc: Fix ecc size, Sascha Hauer
  • [PATCH 2/2] mtd: nand_omap_gpmc: remove unnecessary loop, Sascha Hauer
• [PATCH 1/4] ARM: i.MX6 Wandboard: dont do MMDC Write Leveling Calibration, Alexander Kurz
  • [PATCH 4/4] ARM: i.MX6 Wandboard: add Documentation, Alexander Kurz
  • [PATCH 3/4] ARM: i.MX6 Wandboard: enable Wandboard Quad, Alexander Kurz
  • [PATCH 2/4] ARM: i.MX6 Wandboard Quad: fix PBL UART MUX, Alexander Kurz
    • Re: [PATCH 2/4] ARM: i.MX6 Wandboard Quad: fix PBL UART MUX, Andrey Smirnov
  • Re: [PATCH 1/4] ARM: i.MX6 Wandboard: dont do MMDC Write Leveling Calibration, Sascha Hauer
• New Board i.MX6 Dual Lite based, gianluca
  • Re: New Board i.MX6 Dual Lite based, Sascha Hauer
    • Re: New Board i.MX6 Dual Lite based, gianluca
      • Re: New Board i.MX6 Dual Lite based, Sascha Hauer
      • Re: New Board i.MX6 Dual Lite based, gianluca
• [PATCH] firmware: altera-serial: add support for Arria 10, Bastian Stender
  • Re: [PATCH] firmware: altera-serial: add support for Arria 10, Sascha Hauer
• [PATCH] i.MX/WD: setup the watchdog according to its datasheet, Juergen Borleis
  • Re: [PATCH] i.MX/WD: setup the watchdog according to its datasheet, Sascha Hauer
• [PATCH v3 0/4] imx6ul: add Technexion Pico Hobbit support, Michael Grzeschik
  • [PATCH v3 1/4] ARM: i.MX: setup ENET_TX_CLK_DIR in imx6_init for every imx6ul, Michael Grzeschik
  • [PATCH v3 2/4] ARM: phytec-som-imx6: remove needles enet refclk setup, Michael Grzeschik
  • [PATCH v3 3/4] i.MX: fec: add post PHY reset delay DT property, Michael Grzeschik
  • [PATCH v3 4/4] ARM: i.MX6: add Technexion Pico Hobbit support, Michael Grzeschik
  • Re: [PATCH v3 0/4] imx6ul: add Technexion Pico Hobbit support, Sascha Hauer
• [PATCH] state: add missing help texts, Juergen Borleis
• [PATCH] mtd: nand: omap: Fix BCH bit correction, Daniel Schultz
  • Re: [PATCH] mtd: nand: omap: Fix BCH bit correction, Sascha Hauer
    • Re: [PATCH] mtd: nand: omap: Fix BCH bit correction, Sascha Hauer
      • Re: [PATCH] mtd: nand: omap: Fix BCH bit correction, Sascha Hauer
        • Re: [PATCH] mtd: nand: omap: Fix BCH bit correction, Daniel Schultz
          • Re: [PATCH] mtd: nand: omap: Fix BCH bit correction, Sascha Hauer
            • Re: [PATCH] mtd: nand: omap: Fix BCH bit correction, Daniel Schultz
              • Re: [PATCH] mtd: nand: omap: Fix BCH bit correction, Sascha Hauer
                • Re: [PATCH] mtd: nand: omap: Fix BCH bit correction, Daniel Schultz
• [PATCH] mtd: nand: omap: Return corrected bits for BCH, Daniel Schultz
• RFC: barebox RATP C library?, Aleksander Morgado
  • Re: RFC: barebox RATP C library?, Sascha Hauer
• [PATCH v3 0/4] GPIO "active low", hogging and usb-nop-xceive 'reset-gpio' support, Andrey Smirnov
  • [PATCH v3 1/4] gpio-imx: Do not use gpio_set_value(), Andrey Smirnov
  • [PATCH v3 2/4] gpiolib: Add code to support "active low" GPIOs, Andrey Smirnov
  • [PATCH v3 3/4] gpiolib: Add support for GPIO "hog" nodes, Andrey Smirnov
  • [PATCH v3 4/4] usb-nop-xceiv: Add support for 'reset-gpios' binding, Andrey Smirnov
  • Re: [PATCH v3 0/4] GPIO "active low", hogging and usb-nop-xceive 'reset-gpio' support, Sascha Hauer
• [PATCH 1/2] docs: mvebu can do 2nd stage booting, Uwe Kleine-König
  • [PATCH 2/2] docs: move kwboot description to generic mvebu section, Uwe Kleine-König
  • Re: [PATCH 1/2] docs: mvebu can do 2nd stage booting, Sascha Hauer
• [PATCH] ratp: avoid using already freed memory, Aleksander Morgado
  • Re: [PATCH] ratp: avoid using already freed memory, Sascha Hauer
• [PATCH v2 0/3] imx6ul: add Technexion Pico Hobbit support, Michael Grzeschik
  • [PATCH v2 1/3] ARM: i.MX: setup ENET_TX_CLK_DIR in imx6_init for every imx6ul, Michael Grzeschik
  • [PATCH v2 2/3] ARM: phytec-som-imx6: remove needles enet refclk setup, Michael Grzeschik
  • [PATCH v2 3/3] ARM: i.MX6: add Technexion Pico Hobbit support, Michael Grzeschik
    • Re: [PATCH v2 3/3] ARM: i.MX6: add Technexion Pico Hobbit support, Sascha Hauer
      • Re: [PATCH v2 3/3] ARM: i.MX6: add Technexion Pico Hobbit support, Michael Grzeschik
        • Re: [PATCH v2 3/3] ARM: i.MX6: add Technexion Pico Hobbit support, Sascha Hauer
• [PATCH] sandbox: new --stdinout option to enable a bidirectional console, Aleksander Morgado
  • Re: [PATCH] sandbox: new --stdinout option to enable a bidirectional console, Sascha Hauer
    • Re: [PATCH] sandbox: new --stdinout option to enable a bidirectional console, Aleksander Morgado
• [PATCH] fs: Makefile: Add parseopt to all builds, Daniel Schultz
  • Re: [PATCH] fs: Makefile: Add parseopt to all builds, Sascha Hauer
• [PATCH] console: only bidirectional consoles allow RATP, Aleksander Morgado
  • Re: [PATCH] console: only bidirectional consoles allow RATP, Sascha Hauer
    • [PATCH] ratp: only allow bidirectional consoles, Aleksander Morgado
      • Re: [PATCH] ratp: only allow bidirectional consoles, Sascha Hauer
• [PATCH v3 1/3] fs: add parseopt_b for loop mount option, Philipp Zabel
  • [PATCH v3 2/3] fs: add cdev_create_loop and cdev_remove_loop for loop mount option, Philipp Zabel
  • [PATCH v3 3/3] commands: mount: mention file loop mounts in the help text, Philipp Zabel
  • Re: [PATCH v3 1/3] fs: add parseopt_b for loop mount option, Sascha Hauer
• [PATCH v2 1/3] fs: add parseopt_b for loop mount option, Philipp Zabel
  • [PATCH v2 3/3] commands: mount: mention file loop mounts in the help text, Philipp Zabel
  • [PATCH v2 2/3] fs: add cdev_create_from_file for loop mount option, Philipp Zabel
• [PATCH 0/2] Enabling support for the FIFO based console in sandbox, Aleksander Morgado
  • [PATCH 2/2] sandbox: --stdin and --stdout allow max one bidirectional console, Aleksander Morgado
    • Re: [PATCH 2/2] sandbox: --stdin and --stdout allow max one bidirectional console, Sascha Hauer
      • Re: [PATCH 2/2] sandbox: --stdin and --stdout allow max one bidirectional console, Aleksander Morgado
        • Re: [PATCH 2/2] sandbox: --stdin and --stdout allow max one bidirectional console, Sascha Hauer
  • [PATCH 1/2] sandbox: fix registering multiple consoles, Aleksander Morgado
• [PATCH] Documentation: remote-control: fix typo, Aleksander Morgado
  • Re: [PATCH] Documentation: remote-control: fix typo, Sascha Hauer
    • Re: [PATCH] Documentation: remote-control: fix typo, Aleksander Morgado
      • Re: [PATCH] Documentation: remote-control: fix typo, Sascha Hauer
        • Re: [PATCH] Documentation: remote-control: fix typo, Aleksander Morgado
• [PATCH v2 0/4] GPIO "active low", hogging and usb-nop-xceive 'reset-gpio' support, Andrey Smirnov
  • [PATCH v2 2/4] gpiolib: Add code to support "active low" GPIOs, Andrey Smirnov
    • Re: [PATCH v2 2/4] gpiolib: Add code to support "active low" GPIOs, Sascha Hauer
      • Re: [PATCH v2 2/4] gpiolib: Add code to support "active low" GPIOs, Andrey Smirnov
        • Re: [PATCH v2 2/4] gpiolib: Add code to support "active low" GPIOs, Sascha Hauer
          • Re: [PATCH v2 2/4] gpiolib: Add code to support "active low" GPIOs, Andrey Smirnov
  • [PATCH v2 1/4] gpio-imx: Do not use gpio_set_value(), Andrey Smirnov
  • [PATCH v2 3/4] gpiolib: Add support for GPIO "hog" nodes, Andrey Smirnov
  • [PATCH v2 4/4] usb-nop-xceiv: Add support for 'reset-gpios' binding, Andrey Smirnov
• [PATCH 1/5] cdev: make file operations const, Philipp Zabel
  • [PATCH 2/5] commands: mount: combine dev and devstr, which are the same, Philipp Zabel
  • [PATCH 5/5] commands: mount: mention file loop mounts in the help text, Philipp Zabel
  • [PATCH 3/5] fs: add parseopt_b for loop mount option, Philipp Zabel
  • [PATCH 4/5] fs: add cdev_create_from_file for loop mount option, Philipp Zabel
    • Re: [PATCH 4/5] fs: add cdev_create_from_file for loop mount option, Sascha Hauer
      • Re: [PATCH 4/5] fs: add cdev_create_from_file for loop mount option, Philipp Zabel
  • Re: [PATCH 1/5] cdev: make file operations const, Sascha Hauer
• [PATCH] ARM: imx6: gw54xx: use wdog1 for barebox, Lucas Stach
• [PATCH 1/2] ARM: imx6: gw54xx: add function to retrieve board revision from GSC, Lucas Stach
  • [PATCH 2/2] ARM: imx6: gw54xx: fixup watchdog nodes on pre rev E boards, Lucas Stach
  • Re: [PATCH 1/2] ARM: imx6: gw54xx: add function to retrieve board revision from GSC, Sascha Hauer
• Barebox State stored in DOS partition, Joye Laurent
  • Re: Barebox State stored in DOS partition, Sascha Hauer
• Stable branches resurrected, Sascha Hauer
  • Re: Stable branches resurrected, Ian Abbott
    • Re: Stable branches resurrected, Sascha Hauer
• [PATCH] Makefile: Speed up evaluation of ld options, Sascha Hauer
• [PATCH] usb: imx: Only use clock when it exists, Sascha Hauer
  • Re: [PATCH] usb: imx: Only use clock when it exists, Andrey Smirnov
• [PATCH 1/2] state: do not complain about missing backend-storage-type, Sascha Hauer
  • [PATCH 2/2] state: Add working example dtsi file, Sascha Hauer
• [PATCH 1/4] gpio-imx: Do not use gpio_set_value(), Andrey Smirnov
  • [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Andrey Smirnov
    • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Nikita Yushchenko
      • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Sascha Hauer
        • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Andrey Smirnov
      • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Andrey Smirnov
        • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Nikita Yushchenko
          • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Trent Piepho
            • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Andrey Smirnov
              • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Nikita Yushchenko
                • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Andrey Smirnov
              • Re: [PATCH 2/4] gpiolib: Add code to support "active low" GPIOs, Sascha Hauer
  • [PATCH 4/4] usb-nop-xceiv: Add support for 'reset-gpios' binding, Andrey Smirnov
    • Re: [PATCH 4/4] usb-nop-xceiv: Add support for 'reset-gpios' binding, Nikita Yushchenko
      • Re: [PATCH 4/4] usb-nop-xceiv: Add support for 'reset-gpios' binding, Andrey Smirnov
  • [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes, Andrey Smirnov
    • Re: [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes, Nikita Yushchenko
      • Re: [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes, Andrey Smirnov
        • Re: [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes, Nikita Yushchenko
          • Re: [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes, Andrey Smirnov
        • Re: [PATCH 3/4] gpiolib: Add support for GPIO "hog" nodes, Sascha Hauer
  • Re: [PATCH 1/4] gpio-imx: Do not use gpio_set_value(), Nikita Yushchenko
• [PATCH] clk: i.MX51: Add missing USBOH3_GATE clock, Andrey Smirnov
  • Re: [PATCH] clk: i.MX51: Add missing USBOH3_GATE clock, Nikita Yushchenko
    • Re: [PATCH] clk: i.MX51: Add missing USBOH3_GATE clock, Andrey Smirnov
• [PATCH] i2c: mv64xxx: fix indentation, Antony Pavlov
  • Re: [PATCH] i2c: mv64xxx: fix indentation, Bastian Stender
  • Re: [PATCH] i2c: mv64xxx: fix indentation, Sascha Hauer
• [PATCH] PPC: request a consistent memory layout (part II), Juergen Borleis
  • Re: [PATCH] PPC: request a consistent memory layout (part II), Sascha Hauer
    • Re: [PATCH] PPC: request a consistent memory layout (part II), Juergen Borleis
      • Re: [PATCH] PPC: request a consistent memory layout (part II), Sascha Hauer
• [PATCH] imx-bbu-nand-fcb: add support for imx6ull, Christian Hemp
  • Re: [PATCH] imx-bbu-nand-fcb: add support for imx6ull, Sascha Hauer
• [PATCH 1/4] mmc: Consistently use EXT_CSD_* names from eMMC 5.1 spec, Sascha Hauer
  • [PATCH 2/4] mmc: add eMMC v5 and V5.1 detection support, Sascha Hauer
  • [PATCH 3/4] mmc_extcsd command: Fix multiline prints, Sascha Hauer
  • [PATCH 4/4] mmc_extcsd command: rework, Sascha Hauer
  • Re: [PATCH 1/4] mmc: Consistently use EXT_CSD_* names from eMMC 5.1 spec, Lucas Stach
• [PATCH 1/6] commands: allow <cmd>_aliases[] to be const, Ian Abbott
  • [PATCH 2/6] hush: make source_aliases[] const, Ian Abbott
  • [PATCH 4/6] help: make help_aliases[] const, Ian Abbott
  • [PATCH 3/6] edit: make edit_aliases[] const, Ian Abbott
  • [PATCH 6/6] true: make true_aliases[] const, Ian Abbott
  • [PATCH 5/6] test: make test_aliases[] const, Ian Abbott
  • Re: [PATCH 1/6] commands: allow <cmd>_aliases[] to be const, Sascha Hauer
• [PATCH] xfuncs: fix format specifier in pr_emerg call, Ian Abbott
  • Re: [PATCH] xfuncs: fix format specifier in pr_emerg call, Sascha Hauer
• [PATCH] commands: add ':' as alias for 'true', Ian Abbott
  • Re: [PATCH] commands: add ':' as alias for 'true', Sascha Hauer
• [PATCH 1/2] globalvar: fix build without CONFIG_GLOBALVAR, Lucas Stach
  • [PATCH 2/2] video: select OFTREE from DRIVER_VIDEO_IMX_IPUV3, Lucas Stach
    • Re: [PATCH 2/2] video: select OFTREE from DRIVER_VIDEO_IMX_IPUV3, Sascha Hauer
  • Re: [PATCH 1/2] globalvar: fix build without CONFIG_GLOBALVAR, Sascha Hauer
• [PATCH v1] Documentation: provide documentation for NVMEM interfaces., Oleksij Rempel
  • Re: [PATCH v1] Documentation: provide documentation for NVMEM interfaces., Sascha Hauer
• USB ohci on sama5d3, Georg Hofmann
  • Re: USB ohci on sama5d3, Andrey Smirnov
• [PATCH 1/5] images: clean *.imx-sram-img files, Stefan Lengfeld
  • [PATCH 5/5] docs: render DIP switches as verbatim text, Stefan Lengfeld
  • [PATCH 2/5] imx-usb-loader: add prefix '0x' for hex value, Stefan Lengfeld
  • [PATCH 4/5] docs: add file suffix rst for inclusion in sphinx documentation, Stefan Lengfeld
  • [PATCH 3/5] docs: fix hiding of chapter from imx.rst, Stefan Lengfeld
  • Re: [PATCH 1/5] images: clean *.imx-sram-img files, Sascha Hauer
• Undetected mtd partitions since v2017.05, Norbert Wiedmann
  • Re: Undetected mtd partitions since v2017.05, Ian Abbott
• [PATCH 1/2] ARM: i.MX50: Amazon Kindle: Model EY21 compatibility check, Alexander Kurz
  • [PATCH 2/2] ARM: i.MX50: Kindle-MX50 DT fixes, Alexander Kurz
  • Re: [PATCH 1/2] ARM: i.MX50: Amazon Kindle: Model EY21 compatibility check, Sascha Hauer
• [PATCH v3 1/4] arm: mach-omap: Change mountpoint of boot partitions, Daniel Schultz
  • [PATCH v3 2/4] arm: boards: phytec-som-am335x: Add automount script, Daniel Schultz
    • Re: [PATCH v3 2/4] arm: boards: phytec-som-am335x: Add automount script, Sascha Hauer
      • Re: [PATCH v3 2/4] arm: boards: phytec-som-am335x: Add automount script, Daniel Schultz
  • [PATCH v3 4/4] arm: boards: beaglebone: Delete default env, Daniel Schultz
    • Re: [PATCH v3 4/4] arm: boards: beaglebone: Delete default env, Sascha Hauer
      • Re: [PATCH v3 4/4] arm: boards: beaglebone: Delete default env, Daniel Schultz
  • [PATCH v3 3/4] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
    • Re: [PATCH v3 3/4] arm: boards: phytec-som-am335x: Update boot scripts, Sascha Hauer
      • Re: [PATCH v3 3/4] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
        • Re: [PATCH v3 3/4] arm: boards: phytec-som-am335x: Update boot scripts, Sascha Hauer
          • Re: [PATCH v3 3/4] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
  • Re: [PATCH v3 1/4] arm: mach-omap: Change mountpoint of boot partitions, Sascha Hauer
• [PATCH v2] Fix linking with new ld, based on u-boot, Andrey Panov
  • Re: [PATCH v2] Fix linking with new ld, based on u-boot, Sascha Hauer
• [PATCH] ARM: Embedsky E9: Update environment, Andrey Panov
  • Re: [PATCH] ARM: Embedsky E9: Update environment, Sascha Hauer
• [PATCH 1/3] ARM: socfpga: fix QSPI platform data init, Lucas Stach
  • [PATCH 3/3] mtd: only build mtdraw_raw_to_mtd_offset when write support is enabled, Lucas Stach
  • [PATCH 2/3] param: fix stub prototype of dev_add_param, Lucas Stach
  • Re: [PATCH 1/3] ARM: socfpga: fix QSPI platform data init, Sascha Hauer
• Implement symlinks to directories, Sascha Hauer
  • [PATCH 2/4] fs: drop path_check_prereq(), Sascha Hauer
  • [PATCH 1/4] errno: Include string for ELOOP, Sascha Hauer
  • [PATCH 3/4] fs: Implement links to directories, Sascha Hauer
    • Re: [PATCH 3/4] fs: Implement links to directories, Sascha Hauer
  • [PATCH 4/4] ls: Fix showing links to directories, Sascha Hauer
• [PATCH 1/3] ARM: i.MX: Add i.MX6 ULL support, Stefan Riedmueller
  • [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull, Stefan Riedmueller
    • Re: [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull, Sascha Hauer
      • Antwort: Re: [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull, Stefan Riedmüller
        • Re: Antwort: Re: [PATCH 2/3] ARM: i.MX6ul: Add Clock support for i.MX6ull, Sascha Hauer
  • [PATCH 3/3] ARCH: ARM: Add support for phytec-phycore-imx6ull, Stefan Riedmueller
  • Re: [PATCH 1/3] ARM: i.MX: Add i.MX6 ULL support, Sascha Hauer
• [PATCH] state: remove unused variables, Sascha Hauer
• [PATCH] of: of_find_node_by_devpath: Fix offset in mtd devices, Sascha Hauer
• [PATCH] ARM: i.MX50: Amazon Kindle: Add missing compatibility checks, Sascha Hauer
• [PATCH] of: Search for /memory node by type, if it is not found by name, Andrey Panov
  • Re: [PATCH] of: Search for /memory node by type, if it is not found by name, Sascha Hauer
• [PATCH] Fix linking with new ld, based on u-boot, Andrey Panov
  • Re: [PATCH] Fix linking with new ld, based on u-boot, Sascha Hauer
• [PATCH] fs: Create automount entries for the default mount pathes, Sascha Hauer
• [PATCH] rtc-lib: drop unused rtc_ydays, Antony Pavlov
  • Re: [PATCH] rtc-lib: drop unused rtc_ydays, Sascha Hauer
• [PATCH] state: Fix example in documentation, Sascha Hauer
• master breaks phytec-phycore-imx6ul, Stefan Riedmüller
  • Re: master breaks phytec-phycore-imx6ul, Lucas Stach
• [PATCH v2] PPC: request a consistent memory layout, Juergen Borleis
  • Re: [PATCH v2] PPC: request a consistent memory layout, Sascha Hauer
• [PATCH v3] Documentation: provide documentation for RNG interfaces., Oleksij Rempel
  • Re: [PATCH v3] Documentation: provide documentation for RNG interfaces., Sascha Hauer
• [PATCH] globalvar: Fix value of new globalvar when nvvar exists, Sascha Hauer
  • Re: [PATCH] globalvar: Fix value of new globalvar when nvvar exists, Ian Abbott
• [PATCH] nv: Fix setting of nv.dev.<devname>.<param> variables, Sascha Hauer
• Setting MAC address from nv variable broken in barebox 2017.05.0?, Ian Abbott
  • Re: Setting MAC address from nv variable broken in barebox 2017.05.0?, Sascha Hauer
    • Re: Setting MAC address from nv variable broken in barebox 2017.05.0?, Ian Abbott
  • Re: Setting MAC address from nv variable broken in barebox 2017.05.0?, Ian Abbott
    • Re: Setting MAC address from nv variable broken in barebox 2017.05.0?, Ian Abbott
    • Re: Setting MAC address from nv variable broken in barebox 2017.05.0?, Sascha Hauer
      • Re: Setting MAC address from nv variable broken in barebox 2017.05.0?, Ian Abbott
        • Re: Setting MAC address from nv variable broken in barebox 2017.05.0?, Sascha Hauer
          • Re: Setting MAC address from nv variable broken in barebox 2017.05.0?, Ian Abbott
• [PATCH v2] Documentation: provide documentation for RNG interfaces., Oleksij Rempel
• [PATCH] ARM: i.MX: HAB: update documentation of command sequence files (CSF), Marc Kleine-Budde
  • Re: [PATCH] ARM: i.MX: HAB: update documentation of command sequence files (CSF), Sascha Hauer
• [PATCH] PPC: request a consistent memory layout, Juergen Borleis
  • Re: [PATCH] PPC: request a consistent memory layout, Sascha Hauer
    • Re: [PATCH] PPC: request a consistent memory layout, Juergen Borleis
• [PATCH v1] Documentation: random: provide documentation., Oleksij Rempel
  • Re: [PATCH v1] Documentation: random: provide documentation., Yegor Yefremov
• barebox 2017.05 freezes on VirtualBox x86 boot with "BAREBOX JMP", Josh Beavers
  • Re: barebox 2017.05 freezes on VirtualBox x86 boot with "BAREBOX JMP", Sascha Hauer
• [PATCH] clock: initialize dummy clocksource statically, Sascha Hauer
• [PATCH v2 1/2] Documentation: usbgadget: provide autostart notes, Oleksij Rempel
  • [PATCH v2 2/2] commands: usbgadget: update fastboot help text, Oleksij Rempel
  • Re: [PATCH v2 1/2] Documentation: usbgadget: provide autostart notes, Sascha Hauer
• [PATCH 0/3] i.MX: fec: enable optional clocks in fec driver, Michael Grzeschik
  • [PATCH 3/3] ARM: mx6sx-sabresdb: the ethernet clocks get enabled by fec_imx, Michael Grzeschik
  • [PATCH 2/3] ARM: phytec-som-imx6: the ethernet clocks get enabled by fec_imx, Michael Grzeschik
  • [PATCH 1/3] i.MX: fec: also enable optional clocks, Michael Grzeschik
  • Re: [PATCH 0/3] i.MX: fec: enable optional clocks in fec driver, Sascha Hauer
• GCC 6.3 Linker error, Daniel Schultz
  • Re: GCC 6.3 Linker error, Sascha Hauer
• [PATCH v2 1/5] arm: mach-omap: Change mountpoint of boot partitions, Daniel Schultz
  • [PATCH v2 4/5] arm: boards: beaglebone: Delete default env, Daniel Schultz
    • Re: [PATCH v2 4/5] arm: boards: beaglebone: Delete default env, Sascha Hauer
      • Re: [PATCH v2 4/5] arm: boards: beaglebone: Delete default env, Daniel Schultz
  • [PATCH v2 5/5] arm: boards: afi-gf: Update SD card boot script, Daniel Schultz
  • [PATCH v2 2/5] arm: boards: phytec-som-am335x: Add automount script, Daniel Schultz
  • [PATCH v2 3/5] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz
  • Re: [PATCH v2 1/5] arm: mach-omap: Change mountpoint of boot partitions, Sascha Hauer
    • Re: [PATCH v2 1/5] arm: mach-omap: Change mountpoint of boot partitions, Daniel Schultz
• [PATCH] Documentation: usbgadget: provide autostart notes, Oleksij Rempel
  • Re: [PATCH] Documentation: usbgadget: provide autostart notes, Yegor Yefremov
• [PATCH 0/5] MIPS: start*.S and barebox.lds.S fixups, Antony Pavlov
  • [PATCH 5/5] MIPS: start.S: put entry code into the ".text_entry" section, Antony Pavlov
  • [PATCH 2/5] MIPS: barebox.lds.S: drop unneeded '_start = .', Antony Pavlov
  • [PATCH 1/5] MIPS: start*.S: drop redundant .text, Antony Pavlov
  • [PATCH 3/5] MIPS: barebox.lds.S: remove unused got, Antony Pavlov
  • [PATCH 4/5] MIPS: barebox.lds.S: put .text_entry contents after _stext and _text, Antony Pavlov
  • Re: [PATCH 0/5] MIPS: start*.S and barebox.lds.S fixups, Sascha Hauer
• v2017.05.0, Sascha Hauer
• state fixes/clarifications, Sascha Hauer
  • [PATCH 2/4] state: warn when a state node will be overwritten, Sascha Hauer
    • Re: [PATCH 2/4] state: warn when a state node will be overwritten, Uwe Kleine-König
      • Re: [PATCH 2/4] state: warn when a state node will be overwritten, Sascha Hauer
  • [PATCH 4/4] state: Create alias in of_state_fixup(), Sascha Hauer
  • [PATCH 1/4] state: Binding: remove @0 from node name, Sascha Hauer
  • [PATCH 3/4] state: Make an alias mandatory, Sascha Hauer
• [PATCH] state: backend_bucket_circular: drop unused free_pattern constant, Antony Pavlov
  • Re: [PATCH] state: backend_bucket_circular: drop unused free_pattern constant, Sascha Hauer
• [PATCH] net: rtl8139: drop unused rtl8139_intr_mask constant, Antony Pavlov
  • Re: [PATCH] net: rtl8139: drop unused rtl8139_intr_mask constant, Sascha Hauer
• barebox-state setup, Andreas Wilhelm
  • Re: barebox-state setup, Sascha Hauer
    • Re: barebox-state setup, Andreas Wilhelm
      • Re: barebox-state setup, Sascha Hauer
        • Re: barebox-state setup, Andreas Wilhelm
          • Re: barebox-state setup, Andreas Wilhelm
            • Re: barebox-state setup, Sascha Hauer
• [PATCH] mci: be more verbose about wrong bus-width, Christoph Fritz
  • Re: [PATCH] mci: be more verbose about wrong bus-width, Sascha Hauer
• [PATCH v2 0/8] SoCFPGA: add support for Arria10, Steffen Trumtrar
  • [PATCH v2 4/8] ARM: socfpga: make debug_ll configurable, Steffen Trumtrar
  • [PATCH v2 8/8] ARM: socfpga: add arria10 defconfig, Steffen Trumtrar
  • [PATCH v2 3/8] net: designware: add dwmac-3.72a compatible, Steffen Trumtrar
  • [PATCH v2 6/8] clk: socfpga: add arria10 clk drivers, Steffen Trumtrar
  • [PATCH v2 2/8] clk: socfpga: move driver to subdirectory, Steffen Trumtrar
  • [PATCH v2 7/8] ARM: socfpga: add support for reflex achilles board, Steffen Trumtrar
    • Re: [PATCH v2 7/8] ARM: socfpga: add support for reflex achilles board, Sascha Hauer
      • Re: [PATCH v2 7/8] ARM: socfpga: add support for reflex achilles board, Steffen Trumtrar
        • Re: [PATCH v2 7/8] ARM: socfpga: add support for reflex achilles board, Sascha Hauer
  • [PATCH v2 5/8] ARM: socfpga: add arria10 support, Steffen Trumtrar
    • Re: [PATCH v2 5/8] ARM: socfpga: add arria10 support, Sascha Hauer
      • Re: [PATCH v2 5/8] ARM: socfpga: add arria10 support, Sascha Hauer
        • Re: [PATCH v2 5/8] ARM: socfpga: add arria10 support, Steffen Trumtrar
• [PATCH 1/7] arm: mach-omap: Change file flags in emmc handler, Daniel Schultz
  • [PATCH 3/7] arm: mach-omap: Change mountpoint of boot partitions, Daniel Schultz
    • Re: [PATCH 3/7] arm: mach-omap: Change mountpoint of boot partitions, Sascha Hauer
  • [PATCH 5/7] arm: boards: phytec-som-am335x: Update boot scripts, Daniel Schultz