[PATCH 1/4] ARM: rdu2: use the upstream accepted DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We now only need to carry the Barebox specific parts of the DT.

Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
 arch/arm/dts/imx6qdl-zii-rdu2.dtsi | 518 +++++--------------------------------
 1 file changed, 68 insertions(+), 450 deletions(-)

diff --git a/arch/arm/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/dts/imx6qdl-zii-rdu2.dtsi
index 5b255e9aaa57..7586afe2fef3 100644
--- a/arch/arm/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/dts/imx6qdl-zii-rdu2.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright 2016 Zodiac Inflight Innovations
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -7,9 +7,8 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -30,7 +29,7 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
@@ -40,502 +39,121 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include <arm/imx6qdl-zii-rdu2.dtsi>
 
 / {
 	chosen {
-		linux,stdout-path = &uart1;
-
 		environment@0 {
 			compatible = "barebox,environment";
 			device-path = &nor_flash, "partname:barebox-environment";
 		};
 	};
 
-	mdio {
-		compatible = "virtual,mdio-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mdio1>;
-		gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
-		         &gpio6 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_28p0v: 28p0v {
-		/* main power in */
-		compatible = "regulator-fixed";
-		regulator-name = "28P0V";
-		regulator-min-microvolt = <28000000>;
-		regulator-max-microvolt = <28000000>;
-		regulator-always-on;
-	};
-
-	reg_12p0v: 12p0v {
-		/* main internal power */
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_28p0v>;
-		regulator-name = "12P0V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	reg_12p0v_periph: 12p0vperiph {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_28p0v>;
-		regulator-name = "12P0V-PERIPH";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		/* controlled via "environment processor" */
-		regulator-always-on;
-	};
-
-	reg_5p0v_main: 5p0vmain {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_12p0v>;
-		regulator-name = "5P0MAIN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		/* controlled via "environment processor" */
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator@0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg_supply>;
-		vin-supply = <&reg_5p0v_main>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <1000>;
-	};
-
-	reg_usb_h1_vbus: regulator@1 {
-		compatible = "regulator-fixed";
-		vin-supply = <&reg_5p0v_main>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &i210;
 	};
 };
 
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6qdl-sabresd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* USB Charging Controller */
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02  	0x1b0b0 /*USB_ATT_DETn*/
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  	0x1b0b0 /*USB_EMULATION*/
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20  	0x1b0b0 /*USB_MODE1*/
-				MX6QDL_PAD_EIM_D21__GPIO3_IO21  	0x1b0b0 /*USB_ALERTn*/
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  	0x1b0b0 /*USB_PWR_CTRL_ENn*/
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23  	0x1b0b0 /*USB_MODE2*/
-
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13020 /*USB_OTG_ID*/
-
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /*INT_TOUCH_N*/
-
-				/* DAC */
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /*DAC1_RESET*/
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0 /*DAC2_RESET*/
-
-				/* Need to Place */
-				MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0 /*RMII_INTRPT*/
-				MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b8b0 /*SD_CARD_RESET - Open Drain Output*/
-
-				/* Test Points */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0 /*TP20*/
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /*TP21*/
-				MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0 /*TP22*/
-				MX6QDL_PAD_SD3_DAT7__GPIO6_IO17		0x1b0b0 /*TP23*/
-				MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0 /*TP19*/
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0 /*TP26*/
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0 /*TP27*/
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05		0x1b0b0 /*TP28*/
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x1b0b0 /*TP29*/
-				MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x1b0b0 /*TP30*/
-				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0 /*TP25*/
-				MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0 /*TP39*/
-				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0 /*TP40*/
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0 /*TP42*/
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0 /*TP43*/
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x1b0b0 /*TP44*/
-				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x1b0b0 /*TP45*/
-				MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x1b0b0 /*TP46*/
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0 /*TP41*/
-
-				/* System Type */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0 /*SYS_TYPE_3*/
-				MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x1b0b0 /*SYS_TYPE_2*/
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /*SYS_TYPE_1*/
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b0 /*SYS_TYPE_0*/
-
-				/* Boot Mode Selection Pins */
-				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0 /*BT_CFG1_0*/
-				MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b0 /*BT_CFG1_1*/
-				MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b0 /*BT_CFG1_2*/
-				MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b0 /*BT_CFG1_3*/
-				MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b0 /*BT_CFG1_4*/
-				MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b0 /*BT_CFG1_5*/
-				MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b0 /*BT_CFG1_6*/
-				MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b0 /*BT_CFG1_7*/
-
-				MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b0 /*BT_CFG2_0*/
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b0 /*BT_CFG2_1*/
-				MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b0 /*BT_CFG2_2*/
-				MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b0 /*BT_CFG2_3*/
-				MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b0 /*BT_CFG2_4*/
-				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b0 /*BT_CFG2_5*/
-				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b0 /*BT_CFG2_6*/
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b0 /*BT_CFG2_7*/
-
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0 /*BT_CFG3_0*/
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b0 /*BT_CFG3_1*/
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0 /*BT_CFG3_2*/
-				MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b0b0 /*BT_CFG3_3*/
-				MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x1b0b0 /*BT_CFG3_4*/
-				MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b0b0 /*BT_CFG3_5*/
-				MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b0 /*BT_CFG3_6*/
-				MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b0 /*BT_CFG3_7*/
-
-				MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b0 /*BT_CFG4_0*/
-				MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0 /*BT_CFG4_1*/
-				MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0 /*BT_CFG4_2*/
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0 /*BT_CFG4_3*/
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0 /*BT_CFG4_4*/
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0 /*BT_CFG4_5*/
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0 /*BT_CFG4_7*/
-
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* HPA1_SDn */
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0 /* HPA2_SDn */
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* RST_TOUCH# */
-				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b0 /* NFC_RESET */
-			>;
-		};
-
-		pinctrl_usb_otg_supply: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x40000038
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				/*MX6QDL_PAD_EIM_D17__GPIO3_IO17	0x1b0b0*/
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-				/*MX6QDL_PAD_EIM_EB2__ECSPI1_SS0	0x100b1*/
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b1
-				/*MX6QDL_PAD_KEY_COL2__ECSPI1_SS1	0x1b0b1
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10*/
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 	0x4001b0a8
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
-				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
-
-				MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
-			>;
-		};
-
-		pinctrl_ssi2: ssi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x130b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL			0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3_gpio: i2c3grp_gpio {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b1
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b1
-			>;
-		};
+&uart4 {
+	pic {
+		compatible = "zii,pic-rdu2";
+		current-speed = <1000000>;
+		status = "okay";
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
-			>;
-		};
+		main_eeprom {
+			compatible = "zii,pic-main-eeprom";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "okay";
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
+			boot_source: boot-source@83 {
+				reg = <0x83 1>;
+			};
+			max_failed_boots: max-failed-boots@8E {
+				reg = <0x8E 2>;
+			};
 		};
 
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
+		dds_eeprom {
+			compatible = "zii,pic-dds-eeprom";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "okay";
 		};
 
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-			>;
+		watchdog {
+			compatible = "zii,pic-watchdog";
+			status = "okay";
 		};
 
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17069
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x17069
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17069
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17069
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17069
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17069
-			>;
+		hwmon {
+			compatible = "zii,pic-hwmon";
+			sensors = "RMB_3V3_PMIC",
+				  "RMB_3V3_MCU",
+				  "RMB_5V_MAIN",
+				  "RMB_12V_MAIN",
+				  "RMB_28V_FIL",
+				  "RMB_28V_HOTSWAP",
+				  "DEB_1V8",
+				  "DEB_3V3",
+				  "DEB_28V_DEB",
+				  "DEB_28V_RDU",
+				  "TEMPERATURE",
+				  "TEMPERATURE_2",
+				  "RMB_28V_CURRENT";
+			status = "okay";
 		};
 
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17069
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x17069
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17069
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17069
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17069
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17069
-			>;
+		backlight {
+			compatible = "zii,pic-backlight";
+			status = "okay";
 		};
 
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x1b0b1
-			>;
+		leds {
+			compatible = "zii,pic-leds";
+			status = "okay";
 		};
 
-		pinctrl_mdio1: bitbangmdiogrp {
-			fsl,pins = <
-				/* Bitbang MDIO for DEB Switch */
-				MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x1b030 /*SWITCH_MDC*/
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x18830 /*SWITCH_MDIO*/
-			>;
+		pwrbutton {
+			compatible = "zii,pic-pwrbutton";
+			status = "okay";
 		};
 	};
 };
 
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio2 30 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	nor_flash: m25p128@0 {
+	nor_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "m25p128";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
 
 		partition@0 {
 			label = "barebox";
 			reg = <0x0 0xc0000>;
 		};
 
-		partition@e0000 {
+		partition@c0000 {
 			label = "barebox-environment";
 			reg = <0xc0000 0x40000>;
 		};
 	};
 };
 
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&tempmon {
-	barebox,sensor-name = "TEMPMON";
-};
-
 &i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	lm75@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
+	temp-sense@48 {
 		barebox,sensor-name = "Temp Sensor 1";
 	};
-
-	rtc: ds1341@68 {
-		compatible = "dallas,ds1341";
-		reg = <0x68>;
-	};
-
-	mx6_eeprom: at24@54 {
-		compatible = "at,24c128";
-		pagesize = <32>; /* TODO: VERIFY PAGE SIZE */
-		reg = <0x54>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing_innolux_10_1>;
-			timing_innolux_10_1: innolux_10_1 {
-				clock-frequency = <71100000>;
-				hactive 	= <1280>;
-				vactive 	= <800>;
-				hback-porch 	= <40>;
-				hfront-porch 	= <40>;
-				vback-porch 	= <10>;
-				vfront-porch 	= <3>;
-				hsync-len 	= <80>;
-				vsync-len 	= <10>;
-				de-active 	= <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
 };
 
 &pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 0>;
-	status = "okay";
-};
-
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	status = "okay";
-};
+	host@0 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		reg = <0 0 0 0 0>;
+		device_type = "pci";
 
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio1 23 0>;
-	status = "okay";
-
-	fixed-link {
-		speed = <100>;
-		full-duplex;
+		i210: i210@0 {
+			reg = <0 0 0 0 0>;
+		};
 	};
 };
-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux