This series adds support for the Technexion Pico Hobbit. It also prepares the TX_CLK_DIR pins for imx6ul platforms. This way it will not be needed in every imx6ul based board files. Michael Grzeschik (3): ARM: i.MX: setup ENET_TX_CLK_DIR in imx6_init for every imx6ul ARM: phytec-som-imx6: remove needles enet refclk setup ARM: i.MX6: add Technexion Pico Hobbit support arch/arm/boards/Makefile | 1 + arch/arm/boards/phytec-som-imx6/board.c | 23 ++----- arch/arm/boards/technexion-pico-hobbit/Makefile | 7 ++ arch/arm/boards/technexion-pico-hobbit/board.c | 63 +++++++++++++++++ .../defaultenv-pico-hobbit/init/automount | 11 +++ .../defaultenv-pico-hobbit/network/eth1 | 18 +++++ .../flash-header-imx6ul-pico-hobbit-256.imxcfg | 64 ++++++++++++++++++ .../flash-header-imx6ul-pico-hobbit-512.imxcfg | 65 ++++++++++++++++++ arch/arm/boards/technexion-pico-hobbit/lowlevel.c | 78 ++++++++++++++++++++++ arch/arm/configs/imx_v7_defconfig | 1 + arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6ul-pico-hobbit.dts | 44 ++++++++++++ arch/arm/mach-imx/Kconfig | 6 ++ arch/arm/mach-imx/imx6.c | 11 +++ images/Makefile.imx | 10 +++ 15 files changed, 384 insertions(+), 19 deletions(-) create mode 100644 arch/arm/boards/technexion-pico-hobbit/Makefile create mode 100644 arch/arm/boards/technexion-pico-hobbit/board.c create mode 100644 arch/arm/boards/technexion-pico-hobbit/defaultenv-pico-hobbit/init/automount create mode 100644 arch/arm/boards/technexion-pico-hobbit/defaultenv-pico-hobbit/network/eth1 create mode 100644 arch/arm/boards/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-256.imxcfg create mode 100644 arch/arm/boards/technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-512.imxcfg create mode 100644 arch/arm/boards/technexion-pico-hobbit/lowlevel.c create mode 100644 arch/arm/dts/imx6ul-pico-hobbit.dts -- 2.11.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox