As the mmccpu board do not have support for bootstrap
the previous lowlevel_init.c was replaced with a simple
lowlevel.c with contains only the reset vector.
Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
---
arch/arm/boards/mmccpu/Makefile | 2 +-
arch/arm/boards/mmccpu/lowlevel.c | 26 +++++++
arch/arm/boards/mmccpu/lowlevel_init.c | 135 ---------------------------------
arch/arm/mach-at91/Kconfig | 1 -
4 files changed, 27 insertions(+), 137 deletions(-)
create mode 100644 arch/arm/boards/mmccpu/lowlevel.c
delete mode 100644 arch/arm/boards/mmccpu/lowlevel_init.c
diff --git a/arch/arm/boards/mmccpu/Makefile b/arch/arm/boards/mmccpu/Makefile
index a34efd541..e11fd5b69 100644
--- a/arch/arm/boards/mmccpu/Makefile
+++ b/arch/arm/boards/mmccpu/Makefile
@@ -1,3 +1,3 @@
obj-y += init.o
-lwl-n += lowlevel_init.o
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/mmccpu/lowlevel.c b/arch/arm/boards/mmccpu/lowlevel.c
new file mode 100644
index 000000000..3ba24ce4c
--- /dev/null
+++ b/arch/arm/boards/mmccpu/lowlevel.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9263.h>
+#include <mach/hardware.h>
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+
+ arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
+
+ barebox_arm_entry(AT91_CHIPSELECT_1,
+ at91_get_sdram_size(IOMEM(AT91SAM9263_BASE_SDRAMC0)),
+ NULL);
+}
diff --git a/arch/arm/boards/mmccpu/lowlevel_init.c b/arch/arm/boards/mmccpu/lowlevel_init.c
deleted file mode 100644
index c193eae58..000000000
--- a/arch/arm/boards/mmccpu/lowlevel_init.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
- *
- * Under GPLv2
- */
-
-#include <common.h>
-#include <init.h>
-#include <mach/hardware.h>
-#include <mach/at91_rstc.h>
-#include <mach/at91_wdt.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9_sdramc.h>
-#include <mach/at91sam9_matrix.h>
-#include <mach/at91_lowlevel_init.h>
-
-#define MASTER_PLL_MUL 54
-#define MASTER_PLL_DIV 4
-
-void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
-{
- /* Disable Watchdog */
- cfg->wdt_mr =
- AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
- AT91_WDT_WDV |
- AT91_WDT_WDDIS |
- AT91_WDT_WDD;
-
- /* define PDC[31:16] as DATA[31:16] */
- cfg->ebi_pio_pdr = 0xFFFF0000;
- /* no pull-up for D[31:16] */
- cfg->ebi_pio_ppudr = 0xFFFF0000;
- /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
- cfg->ebi_csa =
- AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_1_8V |
- AT91_MATRIX_EBI0_CS1A_SDRAMC |
- AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA;
-
- cfg->smc_cs = 0;
-#if 1
- cfg->smc_mode =
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_DBW_16 |
- AT91_SMC_TDFMODE |
- AT91_SMC_TDF_(6);
- cfg->smc_cycle =
- AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16);
- cfg->smc_pulse =
- AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) |
- AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13);
- cfg->smc_setup =
- AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) |
- AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0);
-#elif 0 /* slow setup */
- cfg->smc_mode =
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_DBW_16 |
- AT91_SMC_TDFMODE |
- AT91_SMC_TDF_(1);
- cfg->smc_cycle =
- AT91_SMC_NWECYCLE_(0xd00) | AT91_SMC_NRDCYCLE_(0xd00);
- cfg->smc_pulse =
- AT91_SMC_NWEPULSE_(5) | AT91_SMC_NCS_WRPULSE_(7) |
- AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(13);
- cfg->smc_setup =
- AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(2) |
- AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0);
-#else /* RONETIX' original values */
- cfg->smc_mode =
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_DBW_16 |
- AT91_SMC_TDFMODE |
- AT91_SMC_TDF_(6);
- cfg->smc_cycle =
- AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22);
- cfg->smc_pulse =
- AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |
- AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11);
- cfg->smc_setup =
- AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |
- AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10);
-#endif
-
- cfg->pmc_mor =
- AT91_PMC_MOSCEN |
- (255 << 8); /* Main Oscillator Start-up Time */
- cfg->pmc_pllar =
- AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
- AT91_PMC_OUT |
- AT91_PMC_PLLCOUNT | /* PLL Counter */
- (2 << 28) | /* PLL Clock Frequency Range */
- ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
- /* PCK/2 = MCK Master Clock from PLLA */
- cfg->pmc_mckr1 =
- AT91_PMC_CSS_SLOW |
- AT91_PMC_PRES_1 |
- AT91SAM9_PMC_MDIV_2 |
- AT91_PMC_PDIV_1;
- /* PCK/2 = MCK Master Clock from PLLA */
- cfg->pmc_mckr2 =
- AT91_PMC_CSS_PLLA |
- AT91_PMC_PRES_1 |
- AT91SAM9_PMC_MDIV_2 |
- AT91_PMC_PDIV_1;
-
- /* SDRAM */
- /* SDRAMC_TR - Refresh Timer register */
- cfg->sdrc_tr1 = 0x13C;
- /* SDRAMC_CR - Configuration register*/
- cfg->sdrc_cr =
- AT91_SDRAMC_NC_9 |
- AT91_SDRAMC_NR_13 |
- AT91_SDRAMC_NB_4 |
- AT91_SDRAMC_CAS_3 |
- AT91_SDRAMC_DBW_32 |
- (2 << 8) | /* tWR - Write Recovery Delay */
- (8 << 12) | /* tRC - Row Cycle Delay */
- (2 << 16) | /* tRP - Row Precharge Delay */
- (2 << 20) | /* tRCD - Row to Column Delay */
- (5 << 24) | /* tRAS - Active to Precharge Delay */
- (12 << 28); /* tXSR - Exit Self Refresh to Active Delay */
-
- /* Memory Device Register -> SDRAM */
- cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
- /* SDRAM_TR */
- cfg->sdrc_tr2 = 780;
-
- /* user reset enable */
- cfg->rstc_rmr =
- AT91_RSTC_KEY |
- AT91_RSTC_PROCRST |
- AT91_RSTC_RSTTYP_WAKEUP |
- AT91_RSTC_RSTTYP_WATCHDOG;
-}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 704abcead..6363f1a15 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -435,7 +435,6 @@ config MACH_AT91SAM9263EK
config MACH_MMCCPU
bool "Bucyrus MMC-CPU"
- select AT91SAM9263_LWL
help
Say y here if you are using the Bucyrus MMC-CPU
--
2.12.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
