On Fri, Jun 30, 2017 at 11:06:11AM +0200, Uwe Kleine-König wrote: > Hello Sascha, > > On 06/30/2017 08:35 AM, Sascha Hauer wrote: > > Adding this information is a good idea. In this case the values come > > from: > > > > /* > > * These values are taken from: > > * repository: https://github.com/UDOOboard/uboot-imx > > * branch: udoo/2015.04.imx > > * file: board/udoo/udoo_neo/udoo_neo_basic.cfg > > */ > > > > I was about to apply Uwes patch along with this comment, but I just > > realized that the values are from udoo_neo_basic whereas the patch > > seems to support the udoo_neo_full. The udoo neo full has slightly > > different calibration values in the branch above, but probably they > > work on both boards. Uwe, do you know which hardware we actually have > > and support? > > The patch I submitted is tested only on a udoo neo full. Does this > answer your question? Then we should probably use the register values for the udoo neo full, not for the udoo neo basic. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
