Adds support to the driver to enable VBAT regulator at init time.
This is similar to ba14301e0356 ("fbdev/ssd1307fb: add support to enable
VBAT") and cfc5b2b551d8 ("fbdev/ssd1307fb: fix optional VBAT support")
in Linux kernel.
Signed-off-by: Bastian Stender <bst@xxxxxxxxxxxxxx>
---
drivers/video/ssd1307fb.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 7437d340ee..54e02e7220 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -24,6 +24,7 @@
#include <of_device.h>
#include <gpio.h>
#include <of_gpio.h>
+#include <regulator.h>
#define SSD1307FB_DATA 0x40
#define SSD1307FB_COMMAND 0x80
@@ -70,6 +71,7 @@ struct ssd1307fb_par {
u32 prechargep1;
u32 prechargep2;
int reset;
+ struct regulator *vbat;
u32 seg_remap;
u32 vcomh;
u32 width;
@@ -422,6 +424,12 @@ static int ssd1307fb_probe(struct device_d *dev)
goto fb_alloc_error;
}
+ par->vbat = regulator_get(&client->dev, "vbat-supply");
+ if (IS_ERR(par->vbat)) {
+ dev_info(&client->dev, "Will not use VBAT");
+ par->vbat = NULL;
+ }
+
ret = of_property_read_u32(node, "solomon,width", &par->width);
if (ret) {
dev_err(&client->dev,
@@ -505,11 +513,26 @@ static int ssd1307fb_probe(struct device_d *dev)
goto reset_oled_error;
}
+ if (par->vbat) {
+ ret = regulator_disable(par->vbat);
+ if (ret < 0)
+ goto reset_oled_error;
+ }
+
i2c_set_clientdata(client, info);
/* Reset the screen */
gpio_set_value(par->reset, 0);
udelay(4);
+
+ if (par->vbat) {
+ ret = regulator_enable(par->vbat);
+ if (ret < 0)
+ goto reset_oled_error;
+ }
+
+ mdelay(100);
+
gpio_set_value(par->reset, 1);
udelay(4);
@@ -548,6 +571,7 @@ static int ssd1307fb_probe(struct device_d *dev)
panel_init_error:
reset_oled_error:
fb_alloc_error:
+ regulator_disable(par->vbat);
free(info);
return ret;
}
--
2.11.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
