Hi Andrey. On Wed, Jul 26, 2017 at 09:31:09AM -0700, Andrey Smirnov wrote: > Hi everyone, > > This is a v2 of the patch series to add support for NXP's i.MX7 > SabreSD board. It's most likely lacking some advanced features, but > basics such as SD card, Ethernet and, of course, booting Linux seem to > work OK. > > The patchset is updated to use defenitions from Uwe's most recent > submission ("ARM: i.MX7: provide DDR register definitions") so this > series has that as a dependency. > > Patch 1/9 contains a fix for a pretty serious screw-up on my part, so > I think it should be applied to master as well. > > Also, note, that for a reason I haven't been able to track down yet, > compiling Barebox + this patchset without support for FEC will cause > upstream kernel (at least 4.12-rc1) to hang during boot while trying > to access FEC's register file. I suspect clock initialization issue, > but, as I said, I did not find that out conclusively. > > Anyway, as usual, any feedback is wellcome. > > Thanks, > Andrey Smirnov Other than a notpick comment everything looks good to me. For the whole series: Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Sam _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox