Hi Andrey On Wed, Jul 26, 2017 at 09:31:20AM -0700, Andrey Smirnov wrote: > Add minimal code to support NXP i.MX7 SABRESD board. Tested to have > working SD card and first Ethernet port as well as being able to boot > upstream Linux kernel (4.12+). > > Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> > --- > arch/arm/boards/Makefile | 1 + > arch/arm/boards/freescale-mx7-sabresd/Makefile | 2 + > arch/arm/boards/freescale-mx7-sabresd/board.c | 58 +++++++++++++++ > .../flash-header-mx7-sabresd.imxcfg | 82 ++++++++++++++++++++++ > arch/arm/boards/freescale-mx7-sabresd/lowlevel.c | 46 ++++++++++++ > arch/arm/dts/Makefile | 2 +- > arch/arm/dts/imx7d-sdb.dts | 70 ++++++++++++++++++ > arch/arm/mach-imx/Kconfig | 12 ++++ > images/Makefile.imx | 5 ++ > 9 files changed, 277 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boards/freescale-mx7-sabresd/Makefile > create mode 100644 arch/arm/boards/freescale-mx7-sabresd/board.c > create mode 100644 arch/arm/boards/freescale-mx7-sabresd/flash-header-mx7-sabresd.imxcfg > create mode 100644 arch/arm/boards/freescale-mx7-sabresd/lowlevel.c > create mode 100644 arch/arm/dts/imx7d-sdb.dts > > diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile > index 9bbdd684f..295a362bd 100644 > --- a/arch/arm/boards/Makefile > +++ b/arch/arm/boards/Makefile > @@ -148,3 +148,4 @@ obj-$(CONFIG_MACH_WARP7) += element14-warp7/ > obj-$(CONFIG_MACH_VF610_TWR) += freescale-vf610-twr/ > obj-$(CONFIG_MACH_ZII_RDU2) += zii-imx6q-rdu2/ > obj-$(CONFIG_MACH_ZII_VF610_DEV) += zii-vf610-dev/ > +obj-$(CONFIG_MACH_FREESCALE_MX7_SABRESD) += freescale-mx7-sabresd/ This one slipped through - this should also be in alphabetic order. Sam _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
