Signed-off-by: Alexander Kurz <akurz@xxxxxxxx> --- Documentation/boards/imx/Wandboard.rst | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/boards/imx/Wandboard.rst diff --git a/Documentation/boards/imx/Wandboard.rst b/Documentation/boards/imx/Wandboard.rst new file mode 100644 index 0000000..574318a --- /dev/null +++ b/Documentation/boards/imx/Wandboard.rst @@ -0,0 +1,21 @@ +Wandboard +========= + +The Wandboard is a carrier board available with three different +System-on-Module options, the Wandboard Solo (i.MX6S, 512MiB DDR3), +the Wandboard Dual (i.MX6DL, 1GiB DDR3) and Wandboard Quad (i.MX6Q, 2GiB DDR3). + +The device boots from the SD card slot on the System-on-Module board, it +will not boot from the slot on the carrier board. + +To boot barebox on any wandboard, build imx_v7_defconfig +and copy the barebox imx-image to the i.MX boot location of a SD card, e.g. +dd bs=1024 skip=1 seek=1 if=images/barebox-imx6-wandboard.img of=/dev/mmcblk0 + +Only one image exists, supporting all three Wandboard variants, barebox will +detect the Wandboard variant depending on the SoC variant. +This image is only usable for SD-boot. It will not boot via imx-usb-loader. + +Connect to the serial port using a null-modem cable to get console access. + +For further documentation, including board schematics see http://wandboard.org/ -- 2.1.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
