On Fri, Aug 18, 2017 at 04:02:59PM +0200, Oleksij Rempel wrote: > From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> > > Signed-off-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> > Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> > --- > arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 12 + > drivers/net/Kconfig | 7 + > drivers/net/Makefile | 1 + > drivers/net/ag71xx.c | 530 ++++++++++++++++++++++++ > 4 files changed, 550 insertions(+) > create mode 100644 drivers/net/ag71xx.c > > +static int ag71xx_ether_send(struct eth_device *edev, void *packet, int length) > +{ > + struct ag71xx *priv = edev->priv; > + struct device_d *dev = priv->dev; > + ag7240_desc_t *f = &priv->fifo_tx[priv->next_tx]; > + int i; > + > + /* flush */ > + dma_sync_single_for_device((unsigned long)packet, length, DMA_TO_DEVICE); > + > + f->pkt_start_addr = virt_to_phys(packet); > + f->res1 = 0; > + f->pkt_size = length; > + f->is_empty = 0; > + ag71xx_wr(priv, AG71XX_REG_TX_DESC, virt_to_phys(f)); > + ag71xx_wr(priv, AG71XX_REG_TX_CTRL, TX_CTRL_TXE); > + > + /* flush again?! */ > + dma_sync_single_for_cpu((unsigned long)packet, length, DMA_TO_DEVICE); > + > + for (i = 0; i < MAX_WAIT; i++) { > + udelay(100); > + if (f->is_empty) { > + break; > + } > + } > + Use a is_timeout() loop. With this you won't have a minimum delay of 100us and also not a granularity of 100us. > + if (i == MAX_WAIT) { > + dev_err(dev, "Tx Timed out\n"); > + } > + -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox