On Fri, Jun 23, 2017 at 05:09:50PM +0200, Michael Tretter wrote: > The usdhc3 pin group wrongly referred the SD4 pads instead of the SD3 pads. > This leads to issues when muxing the SD4_CMD and SD4_CLK pads for uart3. > > This regression was introduced by code refactoring in commit a5207a6 ("ARM: > dts: i.MX6: drop usage of pin group defines"). > > Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx> > --- > arch/arm/dts/imx6qdl-tqma6x.dtsi | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) Applied, thanks Sascha > > diff --git a/arch/arm/dts/imx6qdl-tqma6x.dtsi b/arch/arm/dts/imx6qdl-tqma6x.dtsi > index f0b1a0db7..82f9ec368 100644 > --- a/arch/arm/dts/imx6qdl-tqma6x.dtsi > +++ b/arch/arm/dts/imx6qdl-tqma6x.dtsi > @@ -76,12 +76,12 @@ > > pinctrl_usdhc3: usdhc3grp { > fsl,pins = < > - MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 > - MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 > - MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 > - MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 > - MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 > - MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > -- > 2.11.0 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox