[PATCH v3 0/4] GPIO "active low", hogging and usb-nop-xceive 'reset-gpio' support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi everyone,

This is a v3 of my original patchset. Changes in this version are the following:

  - new flags, GPIOF_INIT_[IN]ACTIVE and GPIOF_OUT_INIT_[IN]ACTIVE are
    added to avoid semantically overloading the meaing of "HIGH/LOW"
    variants of those

  - added commentary about GPIO 'hog' interpretation of the meaning of
    'output-high', 'output-low'

Changes since v1:

  - 'active low' support is moved inot a dedicated API
  - of_gpiochip_scan_gpios renamed to of_gpiochip_scan_hogs
  - nop_usbphy_init doesn't try to needlessly configure reset gpio's directionality

Let me know if anything else needs changing.

Thanks,
Andrey Smirnov

Andrey Smirnov (4):
  gpio-imx: Do not use gpio_set_value()
  gpiolib: Add code to support "active low" GPIOs
  gpiolib: Add support for GPIO "hog" nodes
  usb-nop-xceiv: Add support for 'reset-gpios' binding

 drivers/gpio/gpio-imx.c     |   2 +-
 drivers/gpio/gpiolib.c      | 146 ++++++++++++++++++++++++++++++++++++++++++--
 drivers/phy/usb-nop-xceiv.c |  45 ++++++++++++--
 include/gpio.h              |  25 ++++++++
 4 files changed, 208 insertions(+), 10 deletions(-)

-- 
2.9.4


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux