We are going to add new RATP command implementations in separate files
within this subdirectory.
Signed-off-by: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
---
common/Kconfig | 13 +------------
common/Makefile | 4 ++--
common/ratp/Kconfig | 14 ++++++++++++++
common/ratp/Makefile | 1 +
common/{ => ratp}/ratp.c | 0
5 files changed, 18 insertions(+), 14 deletions(-)
create mode 100644 common/ratp/Kconfig
create mode 100644 common/ratp/Makefile
rename common/{ => ratp}/ratp.c (100%)
diff --git a/common/Kconfig b/common/Kconfig
index 93b1d8927..81cf72a95 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -755,18 +755,7 @@ config PBL_CONSOLE
must be running at the address it's linked at and bss must
be cleared. On ARM that would be after setup_c().
-config CONSOLE_RATP
- bool
- select RATP
- select CRC16
- select POLLER
- depends on CONSOLE_FULL
- prompt "RATP console support"
- help
- This option adds support for remote controlling barebox via serial
- port. The regular console is designed for human interaction whereas
- this option adds a machine readable interface for controlling barebox.
- Say yes here if you want to control barebox from a remote host.
+source common/ratp/Kconfig
config PARTITION
bool
diff --git a/common/Makefile b/common/Makefile
index 5351ef0f7..bc9474a3a 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -46,7 +46,8 @@ obj-$(CONFIG_RESET_SOURCE) += reset_source.o
obj-$(CONFIG_SHELL_HUSH) += hush.o
obj-$(CONFIG_SHELL_SIMPLE) += parser.o
obj-$(CONFIG_STATE) += state/
-obj-$(CONFIG_RATP) += ratp.o
+obj-$(CONFIG_RATP) += ratp/
+obj-$(CONFIG_CONSOLE_RATP) += ratp/
obj-$(CONFIG_BOOTCHOOSER) += bootchooser.o
obj-$(CONFIG_UIMAGE) += image.o uimage.o
obj-$(CONFIG_FITIMAGE) += image-fit.o
@@ -60,7 +61,6 @@ obj-$(CONFIG_FILE_LIST) += file-list.o
obj-$(CONFIG_FIRMWARE) += firmware.o
obj-$(CONFIG_UBIFORMAT) += ubiformat.o
obj-$(CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB) += imx-bbu-nand-fcb.o
-obj-$(CONFIG_CONSOLE_RATP) += ratp.o
obj-$(CONFIG_BOOT) += boot.o
ifdef CONFIG_PASSWORD
diff --git a/common/ratp/Kconfig b/common/ratp/Kconfig
new file mode 100644
index 000000000..93ff75d64
--- /dev/null
+++ b/common/ratp/Kconfig
@@ -0,0 +1,14 @@
+
+config CONSOLE_RATP
+ bool
+ select RATP
+ select CRC16
+ select POLLER
+ depends on CONSOLE_FULL
+ prompt "RATP console support"
+ help
+ This option adds support for remote controlling barebox via serial
+ port. The regular console is designed for human interaction whereas
+ this option adds a machine readable interface for controlling barebox.
+ Say yes here if you want to control barebox from a remote host.
+
diff --git a/common/ratp/Makefile b/common/ratp/Makefile
new file mode 100644
index 000000000..cab14c6fb
--- /dev/null
+++ b/common/ratp/Makefile
@@ -0,0 +1 @@
+obj-y += ratp.o
diff --git a/common/ratp.c b/common/ratp/ratp.c
similarity index 100%
rename from common/ratp.c
rename to common/ratp/ratp.c
--
2.15.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
