Create new file lowlevel.c that contains the reset vector.
Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
---
arch/arm/boards/haba-knx/Makefile | 3 +++
arch/arm/boards/haba-knx/lowlevel.c | 26 ++++++++++++++++++++++++++
arch/arm/mach-at91/Kconfig | 1 -
3 files changed, 29 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boards/haba-knx/lowlevel.c
diff --git a/arch/arm/boards/haba-knx/Makefile b/arch/arm/boards/haba-knx/Makefile
index d9db6aba6..b1c469dcf 100644
--- a/arch/arm/boards/haba-knx/Makefile
+++ b/arch/arm/boards/haba-knx/Makefile
@@ -1,2 +1,5 @@
obj-y += init.o
+
+lwl-y += lowlevel.o
+
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-haba-knx
diff --git a/arch/arm/boards/haba-knx/lowlevel.c b/arch/arm/boards/haba-knx/lowlevel.c
new file mode 100644
index 000000000..02896856d
--- /dev/null
+++ b/arch/arm/boards/haba-knx/lowlevel.c
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9260.h>
+#include <mach/hardware.h>
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+
+ arm_setup_stack(AT91SAM9260_SRAM_BASE + AT91SAM9260_SRAM_SIZE - 16);
+
+ barebox_arm_entry(AT91_CHIPSELECT_1,
+ at91_get_sdram_size(IOMEM(AT91SAM9260_BASE_SDRAMC)),
+ NULL);
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 1604b8d43..4ca99282a 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -412,7 +412,6 @@ config MACH_QIL_A9G20
config MACH_HABA_KNX_LITE
bool "CALAO HABA-KNX-LITE"
- select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems HABA-KNX-LITE.
<http://www.calao-systems.com>
--
2.12.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
