Hi, this is the output for barebox-freescale-mx28evk-2nd.img Load to address 0x00000000 - - - Loading: * Abort MX28 U-Boot > tftpboot 0 barebox-freescale-mx28evk-2nd.img Using FEC0 device TFTP from server 192.168.12.61; our IP address is 192.168.12.62 Filename 'barebox-freescale-mx28evk-2nd.img'. Load address: 0x0 Loading: T ################# done Bytes transferred = 237766 (3a0c6 hex) MX28 U-Boot > go 0 ## Starting application at 0x00000000 ... - - - Load to address 0x41600000: - - - MX28 U-Boot > tftpboot barebox-freescale-mx28evk-2nd.img Using FEC0 device TFTP from server 192.168.12.61; our IP address is 192.168.12.62 Filename 'barebox-freescale-mx28evk-2nd.img'. Load address: 0x41600000 Loading: T ################# done Bytes transferred = 237766 (3a0c6 hex) MX28 U-Boot > go 0x41600000 ## Starting application at 0x41600000 ... - - - - This macro is on CONFIG_PBL_RELOCATABLE # # memory layout # CONFIG_HAVE_PBL_IMAGE=y CONFIG_HAVE_PBL_MULTI_IMAGES=y CONFIG_HAVE_IMAGE_COMPRESSION=y CONFIG_PBL_IMAGE=y CONFIG_PBL_MULTI_IMAGES=y CONFIG_PBL_RELOCATABLE=y -----邮件原件----- 发件人: Sascha Hauer [mailto:s.hauer@xxxxxxxxxxxxxx] 发送时间: 2018年3月2日 15:37 收件人: duhuanpeng 抄送: barebox@xxxxxxxxxxxxxxxxxxx 主题: Re: freescale-mx28-evk run from ram Hi Du Huanpeng, On Fri, Mar 02, 2018 at 12:30:37AM +0800, duhuanpeng wrote: > Dear all, > > Happy Yuanxiao(Lantern) Festival! Thanks, same to you. Just googled some pictures for the lantern Festival, it must look amazing to stand under that many lanterns ;) > In System.map > 00000000 T __image_start > 00000000 T start > 00000000 T _stext > 00000000 T _text > 00000004 T __bare_init_start > 00000004 T get_runtime_offset > 00000014 t linkadr > 00000018 T __ld_var_base > 00000018 T __ld_var__text > 00000020 t ___text > 00000024 T __ld_var___rel_dyn_start > 0000002c t ____rel_dyn_start > 00000030 T __ld_var___rel_dyn_end > 00000038 t ____rel_dyn_end > 0000003c T __ld_var___dynsym_start > 00000044 t ____dynsym_start > 00000048 T __ld_var___dynsym_end > 00000050 t ____dynsym_end > 00000054 T __ld_var___bss_start > 0000005c t ____bss_start > 00000060 T __ld_var___bss_stop > 00000068 t ____bss_stop > > So, I load barebox.bin to address 0x00000000: > I assume you use freescale-mx28-evk_defconfig, right? Yes. Which image do you start? It seems you are trying to start barebox.bin. > barebox.bin and barebox-freescale-mx28evk-2nd.img It should be images/barebox-freescale-mx28evk-2nd.img instead. The image should be linked to 0x0, that is right. The code is position independent though and the full barebox relocates itself to the end of the available SDRAM automatically. TEXT_BASE is not relevant here. The start symbol is still 0x00000000 even I change TEXT_BASE in menuconfig. my board have 64MiB ram. Modified board. Very cheap one, just 33€. :D EasyARM-i.MX283A http://www.zlg.cn/ipc/ipc/product/id/92.html http://www.zlg.cn/ipc/down/down/id/92.html This board has a LCD(480*800?), I want to test font support on this board. The sch is here: https://drive.google.com/open?id=1_3xW7nfQ6p9tnkjZEDK9vZiLlUnat25K There are many pcf fonts here: https://www.netsarang.com/download/main.html and maybe use code from freetype? http://www.freetype.org/ Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox