Hi, this series allows Barebox to be entered in HYP mode. As the HYP mode is a whole different world it just makes sure to install the hooks needed to get back into HYP and then switches to SVC mode as fast as it can. The kernel is then started in HYP mode by default. This is needed in order to get RasPi 3 support in place, where the firmware opts to hand us the CPUs in HYP mode. I've tested this series on another ARMv7 board, to make sure I didn't break something obvious, but I would still welcome some eyeballs on this code, as it touches a good deal of the lowlevel code. Enrico Joerns (1): ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero Lucas Stach (9): ARM: import opcode helpers from Linux kernel ARM: safely switch from HYP to SVC mode if required ARM: allow secure monitor code to be built without PSCI ARM: add file for HYP mode related setup ARM: don't try to install secure monitor when entered in HYP mode ARM: default to starting kernel in HYP mode when entered in HYP ARM: install HYP vectors at PBL and Barebox entry ARM: rpi: add raspberry pi 3 support ARM: rpi: autosize malloc area arch/arm/boards/raspberry-pi/lowlevel.c | 14 +- arch/arm/boards/raspberry-pi/rpi-common.c | 2 + arch/arm/configs/rpi_defconfig | 3 + arch/arm/cpu/Makefile | 4 + arch/arm/cpu/hyp.S | 115 +++++++++++++++ arch/arm/cpu/lowlevel.S | 23 ++- arch/arm/cpu/sm.c | 6 + arch/arm/cpu/sm_as.S | 15 +- arch/arm/cpu/start-pbl.c | 3 + arch/arm/cpu/start.c | 3 + arch/arm/cpu/uncompress.c | 4 + arch/arm/dts/Makefile | 1 + arch/arm/dts/bcm2837-rpi-3.dts | 15 ++ arch/arm/include/asm/opcodes-virt.h | 39 +++++ arch/arm/include/asm/opcodes.h | 231 ++++++++++++++++++++++++++++++ arch/arm/include/asm/secure.h | 2 + arch/arm/include/asm/system.h | 26 ++++ arch/arm/mach-bcm283x/Kconfig | 6 + arch/arm/mach-bcm283x/core.c | 1 + arch/arm/mach-bcm283x/include/mach/mbox.h | 4 + images/Makefile.bcm283x | 4 + 21 files changed, 504 insertions(+), 17 deletions(-) create mode 100644 arch/arm/cpu/hyp.S create mode 100644 arch/arm/dts/bcm2837-rpi-3.dts create mode 100644 arch/arm/include/asm/opcodes-virt.h create mode 100644 arch/arm/include/asm/opcodes.h -- 2.15.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox