On Mon, Jan 22, 2018 at 11:59:58AM +0100, Uwe Kleine-König wrote: > When using the barebox commands i2c_read or i2c_write the client pointer > passed to the respective function isn't completely initialized. This > makes > > dev_dbg(&client->dev, ...); > > choke as it dereferences client->dev.driver->name with > client->dev.driver being a random value. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> > --- > drivers/i2c/i2c.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Applied, thanks Sascha > > diff --git a/drivers/i2c/i2c.c b/drivers/i2c/i2c.c > index fa2c0cd13697..e9e757558561 100644 > --- a/drivers/i2c/i2c.c > +++ b/drivers/i2c/i2c.c > @@ -184,7 +184,7 @@ int i2c_read_reg(struct i2c_client *client, u32 addr, u8 *buf, u16 count) > msg->len = i; > > status = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); > - dev_dbg(&client->dev, "%s: %u@%u --> %d\n", __func__, > + dev_dbg(&client->adapter->dev, "%s: %u@%u --> %d\n", __func__, > count, addr, status); > > if (status == ARRAY_SIZE(msg)) > @@ -217,7 +217,7 @@ int i2c_write_reg(struct i2c_client *client, u32 addr, const u8 *buf, u16 count) > memcpy(msg->buf + i, buf, count); > > status = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); > - dev_dbg(&client->dev, "%s: %u@%u --> %d\n", __func__, > + dev_dbg(&client->adapter->dev, "%s: %u@%u --> %d\n", __func__, > count, addr, status); > > if (status == ARRAY_SIZE(msg)) > -- > 2.11.0 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox