[RFC] commands: i2c_write: enable raw write to address

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sometimes for communication with a simple I2C devices
(e.g. PCF8574 or TM1650) it's necessary to send only
one data byte into the I2C device.
Current i2c_write command makes this impossible because
you can't just pass 'device address' and 'register number'
(or 'device address' and 'one data byte') to the command.
You always have to pass all three parameters:
'device address', 'register number' and 'data'.

This commit fixes the problem.

Sample usage:

  barebox@barebox sandbox:/ i2c_write -a 0x24 0x01

Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
---
 commands/i2c.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/commands/i2c.c b/commands/i2c.c
index b74c53509f..21c39fe5af 100644
--- a/commands/i2c.c
+++ b/commands/i2c.c
@@ -115,7 +115,7 @@ static int do_i2c_write(int argc, char *argv[])
 
 	count = argc - optind;
 
-	if ((addr < 0) || (reg < 0) || (count == 0) || (addr > 0x7F))
+	if ((addr < 0) || (count == 0) || (addr > 0x7F))
 		return COMMAND_ERROR_USAGE;
 
 	adapter = i2c_get_adapter(bus);
@@ -131,7 +131,11 @@ static int do_i2c_write(int argc, char *argv[])
 	for (i = 0; i < count; i++)
 		*(buf + i) = (char) simple_strtol(argv[optind+i], NULL, 0);
 
-	ret = i2c_write_reg(&client, reg | wide, buf, count);
+	if (reg > 0) {
+		ret = i2c_write_reg(&client, reg | wide, buf, count);
+	} else {
+		ret = i2c_master_send(&client, buf, count);
+	}
 	if (ret != count) {
 		if (verbose)
 			printf("write aborted, count(%i) != writestatus(%i)\n",
-- 
2.15.1


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux