This patch introduces board support for the Karo TX51 i.mx51 sodimm module.
Supported features:
- nand
- ethernet
- mmc0, mmc1 (on stk5v3 development board)
- led (on stk5v3 development board)
What changed from patch V1:
- fixed ethernet initialization
- added mmc1 support
- update defconfig to include commands for supported devices
- updated env:
- don't add 'tx51_base' parameter to kernel cmdline
- update kernel image name to zImage_tx51, which comes with Karo BSP
What doesn't work:
- fec mac is read in reverse byte order.
Kind regards,
Christian Kapeller
Christian Kapeller (2):
update mx51 pad definition for Karo TX51 board
Add board support for Karo TX51 i.mx51 SODIMM module.
arch/arm/Makefile | 1 +
arch/arm/boards/karo-tx51/Makefile | 2 +
arch/arm/boards/karo-tx51/config.h | 21 ++
arch/arm/boards/karo-tx51/env/config | 43 ++++
arch/arm/boards/karo-tx51/flash_header.c | 58 ++++++
arch/arm/boards/karo-tx51/tx51.c | 290 +++++++++++++++++++++++++++
arch/arm/boards/karo-tx51/tx51.dox | 50 +++++
arch/arm/configs/tx51stk5_defconfig | 148 ++++++++++++++
arch/arm/mach-imx/Kconfig | 8 +
arch/arm/mach-imx/include/mach/iomux-mx51.h | 43 ++++-
10 files changed, 659 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boards/karo-tx51/Makefile
create mode 100644 arch/arm/boards/karo-tx51/config.h
create mode 100644 arch/arm/boards/karo-tx51/env/config
create mode 100644 arch/arm/boards/karo-tx51/flash_header.c
create mode 100644 arch/arm/boards/karo-tx51/tx51.c
create mode 100644 arch/arm/boards/karo-tx51/tx51.dox
create mode 100644 arch/arm/configs/tx51stk5_defconfig
--
1.7.5.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
