On Wed, Mar 21, 2012 at 06:27:25PM +0200, Asen Chavdarov Dimov wrote:
> FIXME: part of or no data is written. File copy ends
> with message: "atmel_mci@atmel_mci0: command/data timeout"
Should I apply these patches? These FIXMEs seem to say that they don't
work.
Sascha
>
> Signed-off-by: Asen Chavdarov Dimov <dimov@xxxxxxxxxx>
> ---
> since v1:
> add_device_mci renamed to pm9g45_add_device_mci
>
> since v2:
> - used savedefconfig to minimize the config file
> ---
> arch/arm/boards/pm9g45/init.c | 16 ++++++++++++++++
> arch/arm/configs/pm9g45_defconfig | 7 +++++--
> 2 files changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
> index 567bad4..174dd75 100644
> --- a/arch/arm/boards/pm9g45/init.c
> +++ b/arch/arm/boards/pm9g45/init.c
> @@ -77,6 +77,21 @@ static void pm_add_device_nand(void)
> at91_add_device_nand(&nand_pdata);
> }
>
> +#if defined(CONFIG_MCI_ATMEL)
> +static struct atmel_mci_platform_data __initdata mci_data = {
> + .bus_width = 4,
> + .wp_pin = 0,
> + .detect_pin = AT91_PIN_PD6,
> +};
> +
> +static void pm9g45_add_device_mci(void)
> +{
> + at91_add_device_mci(0, &mci_data);
> +}
> +#else
> +static void pm9g45_add_device_mci(void) {}
> +#endif
> +
> static struct at91_ether_platform_data macb_pdata = {
> .flags = AT91SAM_ETHER_RMII,
> .phy_addr = 0,
> @@ -104,6 +119,7 @@ mem_initcall(pm9g45_mem_init);
> static int pm9g45_devices_init(void)
> {
> pm_add_device_nand();
> + pm9g45_add_device_mci();
> pm9g45_phy_init();
> at91_add_device_eth(&macb_pdata);
>
> diff --git a/arch/arm/configs/pm9g45_defconfig b/arch/arm/configs/pm9g45_defconfig
> index d199abd..8106202 100644
> --- a/arch/arm/configs/pm9g45_defconfig
> +++ b/arch/arm/configs/pm9g45_defconfig
> @@ -4,8 +4,6 @@ CONFIG_AEABI=y
> CONFIG_LONGHELP=y
> CONFIG_CMDLINE_EDITING=y
> CONFIG_AUTO_COMPLETE=y
> -CONFIG_PARTITION=y
> -CONFIG_PARTITION_DISK=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
> CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9g45/env"
> CONFIG_POLLER=y
> @@ -35,4 +33,9 @@ CONFIG_MTD=y
> CONFIG_NAND=y
> CONFIG_NAND_ATMEL=y
> CONFIG_UBI=y
> +CONFIG_MCI=y
> +CONFIG_MCI_ATMEL=y
> CONFIG_EEPROM_AT25=y
> +CONFIG_FS_FAT=y
> +CONFIG_FS_FAT_WRITE=y
> +CONFIG_FS_FAT_LFN=y
> --
> 1.7.4.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
