On Mon, Feb 27, 2012 at 04:40:23PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 09:20 Mon 27 Feb , Eric Bénard wrote:
> > - this is taken from freescale-mx35-3-stack/3stack.c and allows
> > this board to run Freescale's kernel which relies on the system
> > revision to configure the correct PMIC.
> >
> > - On rev0 boards (with DA9053), the log is :
> > detected i.MX53 rev 2.1
> > MCIMX53-START board 1.0
> >
> > On newer boards (rev A or B with MC34708), the log is :
> > mc34708-i2c@mc34708-i2c0: MC34708 ID: 0x0014
> > detected i.MX53 rev 2.1
> > MCIMX53-START-R board 1.0 rev B
> >
> > Signed-off-by: Eric Bénard <eric@xxxxxxxxxx>
> > ---
> > arch/arm/boards/freescale-mx53-loco/board.c | 51 +++++++++++++++++++++++++++
> > 1 files changed, 51 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boards/freescale-mx53-loco/board.c b/arch/arm/boards/freescale-mx53-loco/board.c
> > index 66ff040..6c0e1d1 100644
> > --- a/arch/arm/boards/freescale-mx53-loco/board.c
> > +++ b/arch/arm/boards/freescale-mx53-loco/board.c
> > @@ -103,6 +103,31 @@ static struct i2c_board_info i2c_devices[] = {
> > },
> > };
> >
> > +/*
> > + * Revision to be passed to kernel. The kernel provided
> > + * by freescale relies on this.
> > + *
> > + * C --> CPU type
> > + * S --> Silicon revision
> > + * B --> Board rev
> > + *
> > + * 31 20 16 12 8 4 0
> > + * | Cmaj | Cmin | B | Smaj | Smin|
> > + *
> > + * e.g 0x00053120 --> i.MX35, Cpu silicon rev 2.0, Board rev 2
> > +*/
> > +static unsigned int loco_system_rev = 0x00053000;
> > +
> > +static void set_silicon_rev( int rev)
> > +{
> > + loco_system_rev = loco_system_rev | (rev & 0xFF);
> > +}
> > +
> > +static void set_board_rev(int rev)
> > +{
> > + loco_system_rev = (loco_system_rev & ~(0xF << 8)) | (rev & 0xF) << 8;
> > +}
> > +
> > static int loco_mem_init(void)
> > {
> > arm_add_mem_device("ram0", 0x70000000, SZ_512M);
> > @@ -149,6 +174,8 @@ static int loco_devices_init(void)
> >
> > loco_fec_reset();
> >
> > + set_silicon_rev(imx_silicon_revision());
> > +
> > armlinux_set_bootparams((void *)0x70000100);
> > armlinux_set_architecture(MACH_TYPE_MX53_LOCO);
> >
> > @@ -177,3 +204,27 @@ static int loco_console_init(void)
> > }
> >
> > console_initcall(loco_console_init);
> > +
> > +static int loco_pmic_init(void)
> > +{
> > + struct mc34708 *mc34708;
> > + int rev;
> > +
> > + mc34708 = mc34708_get();
> > + if (!mc34708) {
> > + /* so we have a DA9053 based board */
> > + printf("MCIMX53-START board 1.0\n");
> > + armlinux_set_revision(loco_system_rev);
> > + return 0;
> > + }
> here I still don't like the idea to check the pointer
>
> check the file exist is the rigght way
I don't agree.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
