Hi, Le Wed, 8 Feb 2012 17:20:45 -0500 (EST), "Robert P. J. Day" <rpjday@xxxxxxxxxxxxxx> a écrit : > just for fun, i configured and built MLO and barebox.bin for the > panda, then tried to use that on a panda ES -- got no response > whatever from minicom. i did verify that i could boot to barebox just > fine on a regular panda, though. > > this is different from the case of a regular beagle and beagle xM, > for which the MLO and barebox.bin boot just fine on an xM, so there's > clearly a significant difference between those two panda variants as > far as barebox is concerned. i haven't had any time to look at it in > more detail yet. > Panda ES has a OMAP4460 @ 1.2GHz Panda has a OMAP4430 @ 1GHz. This patch series shows that some changes are really needed to switch from the 4430 to the 4460 : http://lists.denx.de/pipermail/u-boot/2011-July/096351.html Eric -- http://eukrea.com/en/news/104-2012 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
