Some variants of the i.MX53 do not allow to run at 1GHz, so
pass a cpu frequency parameter to the lowlevel init function.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/boards/freescale-mx53-loco/board.c | 2 +-
arch/arm/boards/freescale-mx53-smd/board.c | 2 +-
arch/arm/mach-imx/imx53.c | 9 +++++++--
arch/arm/mach-imx/include/mach/imx5.h | 2 +-
4 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boards/freescale-mx53-loco/board.c b/arch/arm/boards/freescale-mx53-loco/board.c
index fa3a409..dc930b6 100644
--- a/arch/arm/boards/freescale-mx53-loco/board.c
+++ b/arch/arm/boards/freescale-mx53-loco/board.c
@@ -155,7 +155,7 @@ static int loco_console_init(void)
{
mxc_iomux_v3_setup_multiple_pads(loco_pads, ARRAY_SIZE(loco_pads));
- imx53_init_lowlevel();
+ imx53_init_lowlevel(1000);
imx53_add_uart0();
return 0;
diff --git a/arch/arm/boards/freescale-mx53-smd/board.c b/arch/arm/boards/freescale-mx53-smd/board.c
index e7aa419..a7259ba 100644
--- a/arch/arm/boards/freescale-mx53-smd/board.c
+++ b/arch/arm/boards/freescale-mx53-smd/board.c
@@ -160,7 +160,7 @@ static int smd_console_init(void)
{
mxc_iomux_v3_setup_multiple_pads(smd_pads, ARRAY_SIZE(smd_pads));
- imx53_init_lowlevel();
+ imx53_init_lowlevel(1000);
imx53_add_uart0();
imx53_add_uart1();
diff --git a/arch/arm/mach-imx/imx53.c b/arch/arm/mach-imx/imx53.c
index 2fb18e7..4f7d1cb 100644
--- a/arch/arm/mach-imx/imx53.c
+++ b/arch/arm/mach-imx/imx53.c
@@ -47,11 +47,12 @@ static int imx53_init(void)
coredevice_initcall(imx53_init);
#define setup_pll_1000(base) imx5_setup_pll((base), 1000, ((10 << 4) + ((1 - 1) << 0)), (12 - 1), 5)
+#define setup_pll_800(base) imx5_setup_pll((base), 800, ((8 << 4) + ((1 - 1) << 0)), (3 - 1), 1)
#define setup_pll_400(base) imx5_setup_pll((base), 400, ((8 << 4) + ((2 - 1) << 0)), (3 - 1), 1)
#define setup_pll_455(base) imx5_setup_pll((base), 455, ((9 << 4) + ((2 - 1) << 0)), (48 - 1), 23)
#define setup_pll_216(base) imx5_setup_pll((base), 216, ((8 << 4) + ((2 - 1) << 0)), (1 - 1), 1)
-void imx53_init_lowlevel(void)
+void imx53_init_lowlevel(unsigned int cpufreq_mhz)
{
void __iomem *ccm = (void __iomem *)MX53_CCM_BASE_ADDR;
u32 r;
@@ -82,7 +83,11 @@ void imx53_init_lowlevel(void)
/* Switch ARM to step clock */
writel(0x4, ccm + MX5_CCM_CCSR);
- setup_pll_1000((void __iomem *)MX53_PLL1_BASE_ADDR);
+ if (cpufreq_mhz == 1000)
+ setup_pll_1000((void __iomem *)MX53_PLL1_BASE_ADDR);
+ else
+ setup_pll_800((void __iomem *)MX53_PLL1_BASE_ADDR);
+
setup_pll_400((void __iomem *)MX53_PLL3_BASE_ADDR);
/* Switch peripheral to PLL3 */
diff --git a/arch/arm/mach-imx/include/mach/imx5.h b/arch/arm/mach-imx/include/mach/imx5.h
index 0491179..c33f75e 100644
--- a/arch/arm/mach-imx/include/mach/imx5.h
+++ b/arch/arm/mach-imx/include/mach/imx5.h
@@ -1,7 +1,7 @@
#ifndef __MACH_MX5_H
#define __MACH_MX5_H
-void imx53_init_lowlevel(void);
+void imx53_init_lowlevel(unsigned int cpufreq_mhz);
void imx51_init_lowlevel(void);
void imx5_setup_pll(void __iomem *base, int freq, u32 op, u32 mfd, u32 mfn);
void imx5_init_lowlevel(void);
--
1.7.9
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
