this allows I2C to work on boards which don't have external pull up (like LOCO board) Signed-off-by: Eric Bénard <eric@xxxxxxxxxx> --- arch/arm/mach-imx/include/mach/iomux-mx53.h | 8 +++++--- 1 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/include/mach/iomux-mx53.h b/arch/arm/mach-imx/include/mach/iomux-mx53.h index 527f8fe..ac94deb 100644 --- a/arch/arm/mach-imx/include/mach/iomux-mx53.h +++ b/arch/arm/mach-imx/include/mach/iomux-mx53.h @@ -30,7 +30,9 @@ #define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ PAD_CTL_SRE_FAST) - +#define MX53_I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) #define MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL) #define MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL) @@ -377,7 +379,7 @@ #define MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL) #define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL) #define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, MX53_I2C_PAD_CTRL) #define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL) @@ -385,7 +387,7 @@ #define MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL) #define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL) #define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, MX53_I2C_PAD_CTRL) #define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL) -- 1.7.7.6 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
