On 01:27 Tue 21 Feb , Eric Bénard wrote:
> - this is taken from freescale-mx35-3-stack/3stack.c and allows
> this board to run Freescale's kernel which relies on the system
> revision to configure the correct PMIC.
>
> - On rev0 boards (with DA9053), the log is :
> detected i.MX53 rev 2.1
> MCIMX53-START board 1.0
>
> On newer boards (rev A or B with MC34708), the log is :
> mc34708-i2c@mc34708-i2c0: MC34708 ID: 0x0014
> detected i.MX53 rev 2.1
> MCIMX53-START-R board 1.0 rev B
>
> Signed-off-by: Eric Bénard <eric@xxxxxxxxxx>
> ---
> arch/arm/boards/freescale-mx53-loco/board.c | 51 +++++++++++++++++++++++++++
> 1 files changed, 51 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boards/freescale-mx53-loco/board.c b/arch/arm/boards/freescale-mx53-loco/board.c
> index 66ff040..6c0e1d1 100644
> --- a/arch/arm/boards/freescale-mx53-loco/board.c
> +++ b/arch/arm/boards/freescale-mx53-loco/board.c
> @@ -103,6 +103,31 @@ static struct i2c_board_info i2c_devices[] = {
> },
> };
>
> +/*
> + * Revision to be passed to kernel. The kernel provided
> + * by freescale relies on this.
> + *
> + * C --> CPU type
> + * S --> Silicon revision
> + * B --> Board rev
> + *
> + * 31 20 16 12 8 4 0
> + * | Cmaj | Cmin | B | Smaj | Smin|
> + *
> + * e.g 0x00053120 --> i.MX35, Cpu silicon rev 2.0, Board rev 2
> +*/
> +static unsigned int loco_system_rev = 0x00053000;
> +
> +static void set_silicon_rev( int rev)
> +{
> + loco_system_rev = loco_system_rev | (rev & 0xFF);
> +}
> +
> +static void set_board_rev(int rev)
> +{
> + loco_system_rev = (loco_system_rev & ~(0xF << 8)) | (rev & 0xF) << 8;
> +}
> +
> static int loco_mem_init(void)
> {
> arm_add_mem_device("ram0", 0x70000000, SZ_512M);
> @@ -149,6 +174,8 @@ static int loco_devices_init(void)
>
> loco_fec_reset();
>
> + set_silicon_rev(imx_silicon_revision());
> +
> armlinux_set_bootparams((void *)0x70000100);
> armlinux_set_architecture(MACH_TYPE_MX53_LOCO);
>
> @@ -177,3 +204,27 @@ static int loco_console_init(void)
> }
>
> console_initcall(loco_console_init);
> +
> +static int loco_pmic_init(void)
> +{
> + struct mc34708 *mc34708;
> + int rev;
> +
> + mc34708 = mc34708_get();
please check the file exist
> + if (!mc34708) {
> + /* so we have a DA9053 based board */
> + printf("MCIMX53-START board 1.0\n");
> + armlinux_set_revision(loco_system_rev);
please do not duplicate it
> + return 0;
> + }
> +
> + /* get the board revision from fuse */
> + rev = readl(MX53_IIM_BASE_ADDR + 0x878);
> + set_board_rev(rev);
> + printf("MCIMX53-START-R board 1.0 rev %c\n", (rev == 1) ? 'A' : 'B' );
> + armlinux_set_revision(loco_system_rev);
> +
> + return 0;
> +}
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
