This structure is owned by the core, do not change its contents
in the driver.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
drivers/mci/s3c.c | 9 +++------
1 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/mci/s3c.c b/drivers/mci/s3c.c
index 9d46b09..a153b1c 100644
--- a/drivers/mci/s3c.c
+++ b/drivers/mci/s3c.c
@@ -691,17 +691,14 @@ static void mci_set_ios(struct mci_host *mci_pdata, struct device_d *mci_dev,
{
struct device_d *hw_dev = mci_pdata->hw_dev;
struct s3c_mci_host *host_data = GET_HOST_DATA(hw_dev);
- struct mci_host *host = GET_MCI_PDATA(mci_dev);
uint32_t reg;
switch (ios->bus_width) {
case MMC_BUS_WIDTH_4:
host_data->bus_width = 1;
- host->bus_width = 4; /* 4 bit is possible */
break;
case MMC_BUS_WIDTH_1:
host_data->bus_width = 0;
- host->bus_width = 1; /* 1 bit is possible */
break;
default:
return;
@@ -710,16 +707,16 @@ static void mci_set_ios(struct mci_host *mci_pdata, struct device_d *mci_dev,
reg = readl(host_data->base + SDICON);
if (ios->clock) {
/* setup the IO clock frequency and enable it */
- host->clock = host_data->clock = s3c_setup_clock_speed(hw_dev, ios->clock);
+ host_data->clock = s3c_setup_clock_speed(hw_dev, ios->clock);
reg |= SDICON_CLKEN; /* enable the clock */
} else {
reg &= ~SDICON_CLKEN; /* disable the clock */
- host->clock = host_data->clock = 0;
+ host_data->clock = 0;
}
writel(reg, host_data->base + SDICON);
pr_debug("IO settings: bus width=%d, frequency=%u Hz\n",
- host->bus_width, host->clock);
+ host_data->bus_width, host_data->clock);
}
/* ----------------------------------------------------------------------- */
--
1.7.9
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
