Hi Christian, On Thu, Mar 22, 2012 at 12:23:13PM +0100, Christian Kapeller wrote: > Supported devices: > - nand > - ethernet > - mmc0, mmc1 (on stk5v3 development board) > - led (on stk5v3 development board) > --- > arch/arm/Makefile | 1 + > arch/arm/boards/karo-tx51/Makefile | 2 + > arch/arm/boards/karo-tx51/config.h | 21 +++ > arch/arm/boards/karo-tx51/env/config | 43 +++++ > arch/arm/boards/karo-tx51/flash_header.c | 58 ++++++ > arch/arm/boards/karo-tx51/tx51.c | 290 ++++++++++++++++++++++++++++++ > arch/arm/boards/karo-tx51/tx51.dox | 50 +++++ > arch/arm/configs/tx51stk5_defconfig | 148 +++++++++++++++ > arch/arm/mach-imx/Kconfig | 8 + > 9 files changed, 621 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/boards/karo-tx51/Makefile > create mode 100644 arch/arm/boards/karo-tx51/config.h > create mode 100644 arch/arm/boards/karo-tx51/env/config > create mode 100644 arch/arm/boards/karo-tx51/flash_header.c > create mode 100644 arch/arm/boards/karo-tx51/tx51.c > create mode 100644 arch/arm/boards/karo-tx51/tx51.dox > create mode 100644 arch/arm/configs/tx51stk5_defconfig Better late than never, I just applied this patch with some slight adjustments to make it compile on the newer codebase. Unfortunately I cannot find out tx51 board, so I couldn't test it. I hope it works. The iomux patch became unnecessary in the mean time, so I skipped that. Thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
